Engineering Papers⌕ Search

Engineering topics

Burke, James D.

Publications and source records attributed to Burke, James D..

10 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Lunar Base Sitting

Speculation with regard to a permanent lunar base has been with us since Robert Goddard was working on the first liquid-fueled rockets in the 1920's. With the infusion of data from the Apollo Moon flights, a once speculative area of space exploration has become an exciting possibility. A Moon base is not only a very real possibility, but is probably a critical element in the continuation of our piloted space program. This article, originally drafted by World Space Foundation volunteers in conjuction with various academic and research groups, examines some of the strategies involved in selecting an appropriate site for such a lunar base. Site selection involves a number of complex variables, including raw materials for possible rocket propellant generation, hot an cold cycles, view of the sky (for astronomical considerations, among others), geological makeup of the region, and more. This article summarizes the key base siting considerations and suggests some alternatives. Availability of specific resources, including energy and certain minerals, is critical to success.

Staehle, Robert L.↗
NASA NTRS1993

Past US studies and developments for planetary rovers

The history of planetary rovers in the U.S. space program is outlined in the context of the goals, mission and spacecraft designs, and operations designs. The American lunar rover work has had three main stages. In the early sixties, the capacity of Surveyor lunar landers to deliver rovers with a mass of about 50 kg to the Moon was exploited. Several such machines were built and tested beginning in 1964 but none went to the Moon. A manned 400 kg short range rover was then developed. Three of these operated on the Moon in 1971 and 1972 as part of the Apollo 15, 16 and 17 missions. Following these Apollo successes, attempts were made to provide two kinds of follow on models: automated or dual mode (human carrying or not) rovers in the few hundred kg size class, and multi-ton mobile habitats that could carry humans on extended traverses. With the closing of both Soviet and American lunar exploration in the seventies, neither of these proposals succeeded. In parallel with these lunar developments, a lengthy technology program on Martian roving has gone on in the U.S., sometimes coming close to preproject status and sometimes fading away, but never quite being abandoned. As a result it is possible today to contemplate a wide range of lunar and Martian roving missions that could be made practical within a few years. However, with today's funding constraints none of the well studied, larger mission concepts appear to fit. Therefore new efforts are being made toward developing much smaller rovers taking advantage of new miniature techniques, not only in mobility systems but also in the scientific instruments that a small rover can carry. Illustrations are included.

Burke, James D.↗
NASA NTRS1993

Lunar rover navigation concepts

With regard to the navigation of mobile lunar vehicles on the surface, candidate techniques are reviewed and progress of simulations and experiments made up to now are described. Progress that can be made through precursor investigations on Earth is considered. In the early seventies the problem was examined in a series of relevant tests made in the California desert. Meanwhile, Apollo rovers made short exploratory sorties and robotic Lunokhods traveled over modest distances on the Moon. In these early missions some of the required methods were demonstrated. The navigation problem for a lunar traverse can be viewed in three parts: to determine the starting point with enough accuracy to enable the desired mission; to determine the event sequence required to reach the site of each traverse objective; and to redetermine actual positions enroute. The navigator's first tool is a map made from overhead imagery. The Moon was almost completely photographed at moderate resolution by spacecraft launched in the sixties, but that data set provides imprecise topographic and selenodetic information. Therefore, more advanced orbital missions are now proposed as part of a resumed lunar exploration program. With the mapping coverage expected from such orbiters, it will be possible to use a combination of visual landmark navigation and external radio and optical references (Earth and Sun) to achieve accurate surface navigation almost everywhere on the near side of the Moon. On the far side and in permanently dark polar areas, there are interesting exploration targets where additional techniques will have to be used.

Burke, James D.↗
NASA NTRS1992

Towed Articulated Housing For Geophysical Measurements

Snakelike articulated string of rigid shells towed by helicopter, boat, kite or balloon, carries scientific instruments over land and sea surfaces. Nested shells connected to internal chain by bolt covered by preceding cone. String articulates readily to negotiate obstacles, but locally stiff to lie across a narrow crevasse.

Burke, James D.↗
NASA NTRS1990

Lunar rover developments at JPL

Results of previous JPL developments are summarized and the current work related to lunar roving missions is discussed. Objectives of a long lunar transverse are reviewed and include lunar resource prospecting and base site surveys. Rover design criteria are presented, noting that payload instrumentation would include both television cameras for driving and cameras producing panoramic facsimile for high-fidelity scientific imaging and landmark navigation, as well as a multipurpose imaging system with multispectral, close-up, and microscopic capabilities. Instrumentation providing for chemical and mineral analysis, a gravimeter, and a magnetometer are also important. Rover performance requirements include a capability to support a 50 kg payload mass with a rover mass of 500 to 600 kg, powering and supporting the payload, managing the on-board resources available to each instrument, and handling all of the mission data. Desert tests of lunar roving navigation and field geology are discussed.

Burke, James D.↗
NASA NTRS1990

A network of small landers on Mars

This paper describes a class of small landers that could form part of a global network of scientific instrumentation on Mars. Two types of landers are considered: penetrators that implant instruments a few meters beneath the surface, and rough landers that may hit the surface at speeds up to tens of m/sec and survive through the use of impact-limiting techniques. Because some scientific objectives, such as seismic and meteorological investigations, require durations of months and years lander designs giving long lifetimes in the Martian environment are needed. This paper describes both past and more recent work at JPL toward this goal.

Burke, James D.↗
NASA NTRS1989

Atmospheric autorotating imaging device

An imaging device that automatically rotates upon descent through an atmosphere provides an onboard image detector a sweeping panoramic scan as it descends. No moving parts or propulsion system are required. The location, angle and pitch of the winged structure, together with its inertia properties, passively induces rotation. The angled location of the image detector takes advantage of the resulting rotation. Data generated by the image detector may be transmitted to a remote receiver or, alternatively, stored for subsequent recovery.

Burke, James D.↗
NASA NTRS1989

Samara Probe For Remote Imaging

Imaging probe descends through atmosphere of planet, obtaining images of ground surface as it travels. Released from aircraft over Earth or from spacecraft over another planet. Body and single wing shaped like samara - winged seed like those of maple trees. Rotates as descends, providing panoramic view of terrain below. Radio image obtained by video camera to aircraft or spacecraft overhead.

Burke, James D.↗
NASA NTRS1988

To sail the skies of Mars - Scientific ballooning on the red planet

Balloons represent a novel approach to exploring the surface of Mars. One promising aerostat system incorporates a solar-powered balloon as a means of generating diurnally varying lift and so can 'hop' across the surface, obtaining detailed information at a large number of sites. Two important areas of research and testing are underway on solar balloon technology and balloon payload design. The solar balloon concept has been demonstrated on earth, but more work is needed on a 'flyable' version for Mars. Particular attention must be paid to radiation heat transfer and aerodynamic effects. A special 'snake' payload concept has been demonstrated that allows for balloon system traverses of the surface and provides a usable instrument platform. A balloon system of this type could obtain unique surface imaging and physical and chemical data. The flight of the balloon also provides in situ atmospheric boundary-layer and circulation measurements.

Gaidos, Eric J.↗