Engineering Papers⌕ Search

Engineering topics

Burch, J. L.

Publications and source records attributed to Burch, J. L..

At least 163 records · Page 9

IMF changes and polar-cap electric fields and currents

The polar cap, defined as the region of the auroral oval, is magnetically connected to the solar wind; currents may flow easily between the two regions, and polar cap electric fields and currents respond sensitively to variations in the interplanetary magnetic field (IMF). In the present paper, the response of polar cap electric field and currents to variations in IMF x, y, and z components is discussed.

Burch, J. L.↗

Polar cap electron acceleration regions

The characteristics of polar cap electron acceleration regions and the relationship of their occurrence to the interplanetary magnetic field (IMF) have been investigated by using data from Atmosphere Explorer D and Imp J. It was found that electron energy spectra and angular distributions within the acceleration regions are generally consistent with models of acceleration of auroral primaries and reflection of atmospheric secondaries by field-aligned electrostatic potential differences. However, localized strongly field-aligned fluxes are also observed at energies below the spectral peak. It is suggested that these transient beams of field-aligned low-energy electrons result from the acceleration of thermal electrons from within the acceleration regions and that this thermal electron population may be partially replenished by small pitch angle atmospheric secondaries. The occurrence of the polar cap acceleration regions in the northern hemisphere is strongly correlated with IMF vectors which project into the (-X, +Z) sector of the solar magnetospheric X-Z plane; that is, with northward 'away' IMF polarities.

Burch, J. L.↗

Coal-shale interface detection

A penetrometer for coal-shale interface detection is presented. It is used with coal cutting equipment consisting of a reciprocating hammer, having an accelerometer mounted thereon to measure the impact of the hammer as it penetrates the ceiling or floor surface of a mine. Additionally, a pair of reflectometers simultaneously view the same surface, and the outputs from the accelerometer and reflectometers are detected and jointly registered to determine when an interface between coal and shale is being cut through.

Broussard, P. H.↗

Apparatus for assembling space structure

An apparatus for producing a structure in outer space from rolls of prepunched ribbon or sheet material that are transported from the earth to the apparatus located in outer space is described. The apparatus spins the space structure similar to a spider spinning a web utilizing the prepunched ribbon material. The prepunched ribbon material is fed through the apparatus and is shaped into a predetermined channel-shaped configuration. Trusses are punched out of the ribbon and are bent downwardly and attached to a track which normally is a previously laid sheet of material. The size of the overall space structure may be increased by merely attaching an additional roll of sheet material to the apparatus.

Johnston, J. D.↗

Artificial leg with natural gait

Prosthetic device employs actuator that stores energy from movement of natural leg and uses it to pivot artificial hip joint in ensuing step reducing gait distortion and increasing stride cadence.

Burch, J. L.↗

Emergency escape device

Modified egress mechanism used to deploy Lunar Roving Vehicle, could be used in shipping, safety exits, amusement parks, and other applications to gently lower people or equipment several hundred feet.

Burch, J. L.↗

Dayside auroral arcs and convection

Recent Defense Meteorological Satellite Program and International Satellite for Ionospheric Studies dayside auroral observations show two striking features: a lack of visible auroral arcs near noon and occasional fan shaped arcs radiating away from noon on both the morning and afternoon sides of the auroral oval. A simple model which includes these two features is developed by reference to the dayside convection pattern of Heelis et al. (1976). The model may be testable in the near future with simultaneous convection, current and auroral light data.

Reiff, P. H.↗

Research on solar-wind and magnetospheric electric fields and plasmas

Attempts were made to determine the role of the interplanetary magnetic field in controlling: (1) particle acceleration processes in the earth's polar cap; (2) plasma convection patterns at high latitudes; and, (3) the topology of magnetic field lines in the earth's polar cusps. The primary result of the study on polar-cap particle acceleration regions was that they tend to occur in only one polar cap at a time, and that they occur in the hemisphere for which the magnetospheric tail-lobe field lines have solar-magnetospheric x components that are antiparallel to those of the interplanetary and tail-lobe magnetic field. Southward-directed interplanetary magnetic fields give rise to broad convection throats which cover several hours of local time across the dayside cleft. Under such conditions, solar-wind plasma is channeled efficiently through the polar cusps to populate the plasma mantle and dayside boundary layer. On the other hand, the appearance of strong northward components in the interplanetary magnetic field result in a very constricted throat, resulting in inefficient plasma entry at the cusps by diffusion processes.

Burch, J. L.↗

Relationships between particle precipitation and auroral forms

The paper discusses recent measurements pertaining to the relationship between high-latitude particle (electron) precipitation and auroras. The discussion covers three topics: the large-scale relationships between auroral forms and the particle populations of the magnetosphere as determined from satellite measurements; (2) the relationship between satellite and sounding-rocket observations, particularly field-aligned pitch-angle distributions and upward field-aligned currents measured in the vicinity of auroral forms; and (3) recent results on the interaction of auroral electrons with the atmosphere.

Burch, J. L.↗

Mass-dependent channel electron multiplier operation

The absolute counting efficiency and pulse height distributions of a continuous-channel electron multiplier used in the detection of hydrogen, argon and xenon ions are assessed. The assessment technique, which involves the post-acceleration of 8-eV ion beams to energies from 100 to 4000 eV, provides information on counting efficiency versus post-acceleration voltage characteristics over a wide range of ion mass. The charge pulse height distributions for H2 (+), A (+) and Xe (+) were measured by operating the experimental apparatus in a marginally gain-saturated mode. It was found that gain saturation occurs at lower channel multiplier operating voltages for light ions such as H2 (+) than for the heavier ions A (+) and Xe (+), suggesting that the technique may be used to discriminate between these two classes of ions in electrostatic analyzers.

Fields, S. A.↗

Combined docking and grasping device

A combined docking and grasping device for use with a manipulator arm on a docking vehicle and the like for mechanically connecting a docking vehicle with an orbital payload having a receptacle for receiving the device is described. The device includes a pair of opposing jaw members having opposing serrated surfaces for grasping an object and a triangular cam portion on an outer surface for insertion and interlocking with an orbital payload.

Burch, J. L.↗

Solar wind plasma injection at the dayside magnetospheric cusp

Two mechanisms have been proposed for solar wind particle injection at the dayside magnetospheric cusps: magnetic merging and cross-field diffusion. These two mechanisms are experimentally distinguishable in that they produce different latitudinal distributions of particles penetrating to the low-altitude cusp. An examination of proton and electron measurements obtained by the AE-C satellite in the low-altitude dayside cusp reveals evidence of both types of injection processes. A majority of the injection events, especially the more intense fluxes, are best explained by a merging injection model in which cusp particles are confined to the poleward side of the last closed field line and have a characteristic energy that decreases with increasing latitudinal distance from the last closed field line. Less frequent and less intense injection events are better explained in terms of a diffusive injection of cusp particles onto closed dayside field lines with a characteristic energy that increases with increasing latitudinal distance from the last closed field line. Although diffusion appears to be quantitatively less important than merging in terms of the instantaneous particle injection rate, cross-field diffusion nevertheless appears to proceed at an unexpectedly fast rate, possibly exceeding the Bohm diffusion limit.

Reiff, P. H.↗

Improved road handler

Rope-and-pulley device unwinds at rate fairly independent of weight attached to it. Device is easily installed and fabrication is economical. It is particularly suitable as emergency escape device.

Broussard, P. H., Jr.↗

Observations of 10-eV to 25-keV electrons in steady diffuse aurora from Atmosphere Explorer C and D

Electron energy spectra from 10 eV to 25 keV have been obtained from steady diffuse auroral forms at altitudes above 150 km by the Atmosphere Explorer C and D spacecraft. Overlapping coverage of the energy range was provided by the photoelectron spectrometer experiment (10-500 eV) and the low-energy electron experiment (0.2-25 keV). The spectral shape between 10 and 20 eV is independent of altitude between 150 and 270 km, has variable energy dependence between about 20 and 150 eV, and above approximately 150 eV has energy dependence determined primarily by the details of the energy spectrum of electrons incident on the atmosphere. The observed results are in satisfactory agreement with two recently published model calculations.

Peterson, W. K.↗

Actuator device for artificial leg

An actuator device is described for moving an artificial leg of a person having a prosthesis replacing an entire leg and hip joint. The device includes a first articulated hip joint assembly carried by the natural leg and a second articulated hip joint assembly carried by the prosthesis whereby energy from the movement of the natural leg is transferred by a compressible fluid from the first hip joint assembly to the second hip joint assembly for moving the artificial leg.

Burch, J. L.↗

Ion convection velocity reversals in the dayside cleft

Nearly simultaneous measurements of energetic particle precipitation and vector ion velocity have been made for the first time on Atmosphere Explorer C. These data have revealed the existence of both shear and rotational reversals in the ion convection velocity within the region of dayside cleft particle precipitation. The ion velocity data have shown that substantial regions of the dayside polar cap boundary are nearly electric equipotentials at which cleft particle precipitation is also observed but which cannot be identified with a merging region producing open field lines. Asymmetries in the polar cap flow, first implied by Heppner, may be determined by the extent and location of the equipotential boundaries.

Heelis, R. A.↗

Properties of spikelike shear flow reversals observed in the auroral plasma by Atmosphere Explorer C

A study of the characteristics of pairs of oppositely directed spikes in ionospheric convection velocities (or shear flow reversals), as first described by Gurnett, has been conducted by using data from Atmosphere Explorer C. These phenomena tend to occur near the large-scale reversal from sunward to antisunward convection on the nightside of the earth. Generally, the spikelike shear flow reversals involve electric field components along the spacecraft orbit that are directed toward the region between them, in which inverted V type electron precipitation is observed. This relationship between the electron precipitation and the electric field spikes is consistent with an upward-flowing field-aligned current that is fed by Pedersen currents from the adjacent regions of strong convection. In one case a divergent equivalent electric field structure was observed, that is, with the spikelike electric fields pointing away from the region in between, which in this case exhibited a sharp electron flux dropout. This opposite configuration may be an example of counterparts to inverted V structures existing in regions of downward-flowing field-aligned currents.

Burch, J. L.↗

Characteristics of auroral electron acceleration regions observed by Atmosphere Explorer C

Satellite measurements of electron precipitation and ion drift velocities showed that electron acceleration regions (or inverted V's) in the 1200 to 1800 MLT quadrant exhibit the following systematic behavior: electron distribution functions in the accelerated region can be well described by Maxwellian primary electron beams accelerated through an electrostatic potential; the typical inverted V latitudinal structure is always observed in the accelerated regions, the electrostatic potential reaching a maximum and consequently decreasing to near zero over distances of 100 to 250 km; the Maxwellian temperature of the primary electron beam increases systematically with increasing electrostatic potential; rather weak acceleration regions, characterized by values of the electrostatic potential below 1 keV and values of the Maxwellian temperature between 100 and 350 eV, occur in the cusp and in the highest-latitude portion of the dusk side electron precipitation zone.

Burch, J. L.↗