Engineering Papers⌕ Search

Engineering topics

Buhler, C. R.

Publications and source records attributed to Buhler, C. R..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2020

Current State of the Electrodynamic Dust Shield for Mitigation

The Electrodynamic Dust Shield (EDS) has been developed as a means to lift, transport and remove dust from surfaces for over 18 years in the Electrostatics and Surface Physics Laboratory at NASA Kennedy Space Center. Resent advances in the technology have allowed large-scale EDSs to be fabricated using roll-to-roll techniques for quick efficient processing. The aim of the current research is to demonstrate the 3-dimensional (3-D) version of the EDS and its applicability to various surfaces of interest throughout the Artemis program that require dust mitigation. The conventional two dimensional (2-D) EDS has been comprised of interdigitated electrodes across a surface of alternating polarity to setup non-uniform electric fields in the location of interest for which the particles need to be removed. The 2-D system can be designed to accommodate various phases. For example, the two phase EDS is comprised of two electrodes 180˚ out of phase, while the 3-phase EDS is 120˚ out of phase with the adjacent leg. 4-phase EDS configurations are also possible but for each square wave a high voltage signal is applied to each leg.

Buhler, C. R.↗
NASA NTRS2018

Mitigation of Electrostatic Hazards on Spacecraft

Spacecraft are complex systems operating in challenging environments that require customized testing procedures designed to mitigate the unique hazards of a space launch environment. As an example of those testing procedures, we describe the test methodology and recommendations developed to mitigate electrostatic discharges that could have triggered an explosion of the Space Shuttle during launch, return to launch site, abort after one orbit, or during normal landing.

Calle, C. I.↗
NASA NTRS2012

Electrostatic Studies for the 2008 Hubble Service Repair Mission

High vacuum triboelectric testing of space materials was required to identify possible Electrostatic Discharge (ESD) concerns for the astronauts in space during electronics board replacement on the Hubble Space Telescope. Testing under high vacuum conditions with common materials resulted in some interesting results. Many materials were able to charge to high levels which did not dissipate quickly even when grounded. Certain materials were able to charge up in contact with grounded metals while others were not. An interesting result was that like materials did not exchange electrostatic charge under high vacuum conditions. The most surprising experimental result is the lack of brush discharges from charged insulators under high vacuum conditions.

Buhler, C. R.↗
NASA NTRS2010

Active Dust Control and Mitigation Technology for Lunar and Martian Exploration

Mars is covered with a layer of dust that has been homogenized by global dust storms. Dust, levitated by these storms as well as by the frequent dust devils, is the dominant weather phenomenon on Mars. NASA's Mars exploration rovers have shown that atmospheric dust falling on solar panels can decrease their efficiency to the point of rendering the rover unusable. Dust covering the surface of the moon is expected to be electrostatically charged due to the solar wind, cosmic rays, and the solar radiation itself through the photoelectric effect. Electrostatically charged dust has a large tendency to adhere to surfaces. The Apollo missions to the moon showed that lunar dust adhesion can hinder manned and unmanned exploration activities. In this paper, we report on our efforts to develop and electrodynamic dust shield to prevent the accumulation of dust on surfaces and to remove dust already adhering to those surfaces. The technology uses electrostatic and dielectrophoretic forces to carry dust particles off surfaces and to generate an electrodynamic shield that prevents further accumulation of dust. The concept of the electrodynamic dust shield was introduced by NASA in the late 1960s and later reduced to practice during the 1970s for terrestrial applications. In 2003, our laboratory, in collaboration with several universities, applied this technology to space applications, specifically to remove dust from solar panels on Mars. We show how, with an appropriate design, we can prevent the electrostatic breakdown at the low Martian atmospheric pressures. We are also able to show that uncharged dust can be lifted and removed from surfaces under simulated Martian environmental conditions. We have also been able to develop a version of the electrodynamic dust shield working under hard vacuum conditions that simulate the lunar environment. We have implemented the electrodynamic dust shield on solar arrays, optical systems, spectrometers, viewports, thermal radiators, batteries, and power systems, as well as on fabrics for spacesuits. We present data on the design and optimization of the electrodynamic dust shields and provide data on the performance of the different implementations of the technology for lunar and Martian exploration activities.

Calle, C. I.↗
NASA NTRS2010

Active Dust Mitigation Technology for Thermal Radiators for Lunar Exploration

Dust accumulation on thermal radiator surfaces planned for lunar exploration will significantly reduce their efficiency. Evidence from the Apollo missions shows that an insulating layer of dust accumulated on radiator surfaces could not be removed and caused serious thermal control problems. Temperatures measured at different locations in the magnetometer on Apollo 12 were 38 C warmer than expected due to lunar dust accumulation. In this paper, we report on the application of the Electrodynamic Dust Shield (EDS) technology being developed in our NASA laboratory and applied to thermal radiator surfaces. The EDS uses electrostatic and dielectrophoretic forces generated by a grid of electrodes running a 2 micro A electric current to remove dust particles from surfaces. Working prototypes of EDS systems on solar panels and on thermal radiators have been successfully developed and tested at vacuum with clearing efficiencies above 92%. For this work EDS prototypes on flexible and rigid thermal radiators were developed and tested at vacuum.

Calle, C. I.↗
NASA NTRS2009

Particle Removal by Electrostatic and Dielectrophoretic Forces for Dust Control During Lunar Exploration Missions

Particle removal during lunar exploration activities is of prime importance for the success of robotic and human exploration of the moon. We report on our efforts to use electrostatic and dielectrophoretic forces to develop a dust removal technology that prevents the accumulation of dust on solar panels and removes dust adhering to those surfaces. Testing of several prototypes showed solar shield output above 90% of the initial potentials after dust clearing.

Calle, C. I.↗
NASA NTRS2008

Electrostatic Characterization of Lunar Dust Simulants

Lunar dust can jeopardize exploration activities due to its ability to cling to most surfaces. In this paper, we report on our measurements of the electrostatic properties of the lunar soil simulants. Methods have been developed to measure the volume resistivity, dielectric constant, chargeability, and charge decay of lunar soil. While the first two parameters have been measured in the past [Olhoeft 1974], the last two have never been measured directly on the lunar regolith or on any of the Apollo samples. Measurements of the electrical properties of the lunar samples are being performed in an attempt to answer important problems that must be solved for the development of an effective dust mitigation technology, namely, how much charge can accumulate on the dust and how long does the charge remain on surfaces. The measurements will help develop coatings that are compatible with the intrinsic electrostatic properties of the lunar regolith.

Calle, C. I.↗
NASA NTRS2007

In Situ Test Method for the Electrostatic Characterization of Lunar Dust

This paper serves to illustrate the testing methods necessary to classify the electrostatic properties of lunar dust using in situ instrumentation and the required techniques therein. A review of electrostatic classification of lunar simulant materials is provided as is its relevance to the success of future human lunar missions.

Buhler, C. R.↗
NASA NTRS2006

Electrodynamic Dust Shield for Surface Exploration Activities on the Moon and Mars

The Apollo missions to the moon showed that lunar dust can hamper astronaut surface activities due to its ability to cling to most surfaces. NASA's Mars exploration landers and rovers have also shown that the problem is equally hard if not harder on Mars. In this paper, we report on our efforts to develop and electrodynamic dust shield to prevent the accumulation of dust on surfaces and to remove dust already adhering to those surfaces. The parent technology for the electrodynamic dust shield, developed in the 1970s, has been shown to lift and transport charged and uncharged particles using electrostatic and dielectrophoretic forces. This technology has never been applied for space applications on Mars or the moon due to electrostatic breakdown concerns. In this paper, we show that an appropriate design can prevent the electrostatic breakdown at the low Martian atmospheric pressures. We are also able to show that uncharged dust can be lifted and removed from surfaces under simulated Martian environmental conditions. This technology has many potential benefits for removing dust from visors, viewports and many other surfaces as well as from solar arrays. We have also been able to develop a version of the electrodynamic dust shield working under. hard vacuum conditions. This version should work well on the moon.

Calle, C. I.↗
NASA NTRS2006

Degradation of Organics in a Glow Discharge Under Martian Conditions

The primary objective of this project is to understand the consequences of glow electrical discharges on the chemistry and biology of Mars. The possibility was raised some time ago that the absence of organic material and carbonaceous matter in the Martian soil samples studied by the VikinG Landers might be due in part to an intrinsic atmospheric mechanism such as glow discharge. The high probability for dust interactions during Martian dust storms and dust devils, combined with the cold, dry climate of Mars most likely results in airborne dust that is highly charged. Such high electrostatic potentials generated during dust storms on Earth are not permitted in the low-pressure CO2 environment on Mars; therefore electrostatic energy released in the form of glow discharges is a highly likely phenomenon. Since glow discharge methods are used for cleaning and sterilizing surfaces throughout industry, the idea that dust in the Martian atmosphere undergoes a cleaning action many times over geologic time scales appears to be a plausible one.

Hintze, P. E.↗
NASA NTRS2006

Use of Atmospheric Glow Discharge Plasma to Modify Spaceport Materials

Numerous materials used in spaceport operations require stringent evaluation before they can be utilized. It is critical for insulative polymeric materials that any surface charge be dissipated as rapidly as possible to avoid Electrostatic Discharges (ESD) that could present a danger. All materials must pass the Kennedy Space Center (KSC) standard electrostatic test [1]; however several materials that are considered favorable for Space Shuttle and International Space Station use have failed. Moreover, to minimize contamination of Mars spacecraft, spacecraft are assembled under cleanroom conditions and specific cleaning and sterilizing procedures are required for all materials. However, surface characteristics of these materials may allow microbes to survive by protecting them from sterilization and cleaning techniques. In this study, an Atmospheric Pressure Glow Discharge Plasma (APGD) [2] was used to modify the surface of several materials. This allowed the materials surface to be modified in terms of hydrophilicity, roughness, and conductivity without affecting the bulk properties. The objectives of this study were to alter the surface properties of polymers for improved electrostatic dissipation characteristics, and to determine whether the consequent surface modification on spaceport materials enhanced or diminished microbial survival.

Trigwell, S.↗
NASA NTRS2005

Partial Model of Insulator/Insulator Contact Charging

Two papers present a two-phase equilibrium model that partly explains insulator/ insulator contact charging. In this model, a vapor of ions within a gas is in equilibrium with a submonolayer of ions of the same species that have been adsorbed on the surface of an insulator. The surface is modeled as having localized states, each with a certain energy of adsorption for an ion. In an earlier version of the model described in the first paper, the ions do not interact with each other. Using the grand canonical ensemble, the chemical potentials of both vapor and absorbed phases are derived and equated to determine the vapor pressure. If a charge is assigned to the vapor particles (in particular, if single ionization is assumed), then the surface charge density associated with adsorbed ions can be calculated as a function of pressure. In a later version of the model presented in the second paper, the submodel of the vapor phase is extended to include electrostatic interactions between vapor ions and adsorbed ones as well as the screening effect, at a given distance from the surface, of ions closer to the surface. Theoretical values of this model closely match preliminary experimental data on the discharge of insulators as a function of pressure.

Hogue, Michael↗
NASA NTRS2004

Electrodynamic Dust Shield for Solar Panels on Mars

The Materials Adherence Experiment on the Mars Pathfinder mission measured an obscuration of the solar arrays due to dust deposition at a rate of about 0.2 8% per day. It was estimated that settling dust may cause degradation in performance of a solar panel of between 22% and 89% over the course of two years [1, 2]. These results were obtained without the presence of a global dust storm. Several types of adherence forces keep dust particles attached to surfaces. The most widely discussed adherence force is the electrostatic force. Laboratory experiments [3] as well as indirect evidence from the Wheel Abrasion Experiment on Pathfinder [4] indicate that it is very likely that the particles suspended in the Martian atmosphere are electrostatically charged.

Calle, C. I.↗
NASA NTRS2004

Preliminary Results of a New Type of Surface Property Measurement Ideal for a Future Mars Rover Mission

The success of the recent rover missions to Mars has stressed the importance of acquiring the maximum amount of geological information with the least amount of data possible. We have designed, tested and implemented special sensors mounted on a rover s wheel capable of detecting minute changes in surface topology thus eliminating the need for specially- made science platforms. These sensors, based on the previously designed, flight qualified Mars Environmental Compatibility Assessment (MECA) Electrometer, measure the static electricity (triboelectricity) generated between polymer materials and the Martian regolith during rover transverses. The sensors are capable of detecting physical changes in the soil that may not be detectable by other means, such as texture, size and moisture content. Although triboelectricity is a surface phenomenon, the weight of a rover will undoubtedly protrude the sensors below the dust covered layers, exposing underlying regolith whose properties may not be detectable through other means.

Buhler, C. R.↗
NASA NTRS2003

Electrical Breakdown in a Martian Gas Mixture

The high probability for dust interactions during Martian dust storms and dust devils combined with the cold, dry climate of Mars most likely result in airborne dust that is highly charged. On Earth, potential gradients up to 5 kV/m have been recorded and in some cases resulted in lightning. Although the Martian atmosphere is not conducive to lightning generation, it is widely believed that electrical discharge in the form of a corona occurs. In order to understand the breakdown of gases, Paschen measurements are taken which relate the minimum potential required to spark across a gap between two electrodes. The minimum potential is plotted versus the pressure-distance value for electrodes of a given geometry. For most gases, the potential decreases as the pressure decreases. For CO2, the minimum in the curve happens to be at Mars atmospheric pressures (5-7 mm Hg) for many distances and geometries. However, a very small amount (<0.1%) of mixing gases radically changes the curve, as noted by Leach. Here, we present the first experimental results of a Paschen curve for a Mars gas mixture compared with 100% pure CO2.

Buhler, C. R.↗
NASA NTRS2003

Measurement of Mars Dust Particle Size and Electrostatic Charge Distributions Using the E-SPART Analyzer

There are strong indications that dust is of great importance on Mars. Dust appears to have both long-term effects on the surface geologic evolution as well as on the aeolian processes in the present climate conditions. Early spacecraft missions confirmed hypotheses from telescopic work that changes observed in the planet s surface markings are caused by wind-driven redistribution of dust. Suspended dust is known to alter the atmospheric thermal structure and circulation as well as to obscure our ability for remote observation of the planet s surface, especially during the occasional development of larger, planet-encircling dust storms which occur on average once every three Martian years.

Mazumder, M. K.↗
NASA NTRS2002

Development of a Charged Particle Detector for Windborne Martian Dust

A prototype of an aerodynamic electrometer to measure the electrostatic properties of Martian atmospheric dust has been constructed. The instrument will enable a more thorough understanding of the potential for electrostatic discharge of different materials on Mars. Additional information is contained in the original extended abstract.

Calle, C. I.↗