Engineering topics

Bryant, N. A.

Publications and source records attributed to Bryant, N. A..

At least 37 records · Page 2

NASA NTRS1980

Urban solar photovoltaics potential: An inventory and modelling study applied to the San Fernando Valley region of Los Angeles

Procedures for analyzing the potential of solar photovoltaic collectors to meet energy requirements in a metropolitan region are described and a modeling effort is applied to the San Fernando Valley region of Los Angeles. The procedure involves a series of steps designed to produce maps and tabulations revealing the amount of rooftop area available for establishing solar collectors and the proportion of energy requirement that could be potentially supplied by solar photovoltaics within each of the 533 mainline feeder service areas in the study area. For the sixty five square mile study area, the results showed that, with half the available flat and south facing roofs used and assuming the availability of energy storage, 52.7 percent of the actual kWh energy requirements could have been met in 1978 using photovoltaic collectors. Hourly, daily, weekly, and monthly fluctuations in potential supply and actual loads and recommendations of avenues for further research are discussed. Some further potential applications of the modeling technique are suggested.

Angelici, G. L.↗

NASA NTRS1980

Analysis of multiple imagery at Jet Propulsion Laboratory's Image Processing Laboratory

During the past decade advanced techniques have been developed at JPL for processing large volumes of imagery returned by the more recent planetary spacecraft. In addition, the Image Processing Laboratory has become involved in the processing of earth resources imagery acquired by Landsat and a variety of other sensors flown on aircraft and spacecraft. The trend within the facility has been toward the development of technology capable of processing increasingly larger image data bases. A variety of applications in both the planetary and earth observations areas involve the merging and/or processing of more than one image and often require the correlation of data acquired by a variety of sensors.

Green, W. B.↗

NASA NTRS1979

Satellite-aided evaluation of population exposure to air pollution

The evaluation of population exposure to air pollution through the computer processing of Landsat digital land use data, along with total suspended particulate estimates and population data by census tracts, is demonstrated. Digital image processing was employed to analyze simultaneously data from Landsat MSS bands 4 through 7 in order to extract land use and land cover information. The three data sets were spatially registered in a digital format, compatible with integrated computer processing, and cross-tabulated. A map illustrating relative air quality by 2-sq km cells for the residential population in the Portland, Oregon area is obtained.

Todd, W. J.↗

NASA NTRS1979

Solar potential inventory and modeling

Image processing procedures for calculating the energy that roof-mounted solar collectors can potentially supply in a metropolitan area are presented. Satellite multispectral imagery from which land cover types can be determined digitally was sampled in order to estimate the percentage of land area occupied by flat or south-facing roof tops in residential and commercial/industrial areas. Procedures were applied to the various power subdistricts of the western San Fernando valley of California, and it was found that on the average 120% of the existing power demand could be met if only half the useable rooftop area were utilized, amounting to 385 MW of peak power and indicating the applicability of solar cells to power generation in urban areas.

Angelici, G. L.↗

NASA NTRS1979

Map characteristics of Landsat mosaics

Map characteristics of the Landsat mosaics developed at JPL are considered. Procedures for digital mosaicking of Landsat frames to standard map projections were used to mosaic at full resolution ten scenes over the California desert region and twenty-one scenes over Arizona. The procedures are analyzed for horizontal positioning error (global and local) and the potential for classification error associated with the adjustment of brightness of Z values between frames; the use of this technology for the mapping of extensive features is discussed. Mosaicking facilities, techniques, mapping accuracy, and thematic mapping characteristics are described. A comparative analysis of Landsat mosaicking technology developed at Goddard Space Flight Center, IBM Gaithersburg, and USGS Flagstaff is made, and suggestions are given for algorithm development to improve systems capacity and ability to handle a variety of cases.

Zobrist, A. L.↗

NASA NTRS1979

California desert resource inventory using multispectral classification of digitally mosaicked Landsat frames

Procedures for adjustment of brightness values between frames and the digital mosaicking of Landsat frames to standard map projections are developed for providing a continuous data base for multispectral thematic classification. A combination of local terrain variations in the Californian deserts and a global sampling strategy based on transects provided the framework for accurate classification throughout the entire geographic region.

Bryant, N. A.↗

NASA NTRS1978

Multiple-input land-use system concept

Image based information system would accept data in a variety of formats and convert it to registered raster-scan with single format. Images could then be manipulated by system processor to read out desired information. Existing methods of digital-image processing could be modified to develop necessary software and hardware needed to implement system.

Billingsley, F. C.↗

NASA NTRS1978

An image based information system - Architecture for correlating satellite and topological data bases

The paper describes the development of an image based information system and its use to process a Landsat thematic map showing land use or land cover in conjunction with a census tract polygon file to produce a tabulation of land use acreages per census tract. The system permits the efficient cross-tabulation of two or more geo-coded data sets, thereby setting the stage for the practical implementation of models of diffusion processes or cellular transformation. Characteristics of geographic information systems are considered, and functional requirements, such as data management, geocoding, image data management, and data analysis are discussed. The system is described, and the potentialities of its use are examined.

Bryant, N. A.↗

NASA NTRS1978

Improving forest cover classification accuracy from Landsat by incorporating topographic information

The paper shows that accuracies of computer classification of species-specific forest cover types from Landsat imagery can be improved by 27% or more through the incorporation of topographic information from digital terrain tapes registered to multidate Landsat imagery. The topographic information improves classification accuracies because many common forest tree species have preferred elevation ranges and slope aspects. These preferences allow the separation of forest cover types which have similar spectral signatures but different species compositions. It is noted that the development of a classification system which uses prior probabilities and sets of prior probabilities conditioned by one or two external variables represents a significant increase in classification power.

Strahler, A. H.↗

NASA NTRS1977

LANDSAT-D thematic mapper simulation using aircraft multispectral scanner data

A simulation of imagery from the upcoming LANDSAT-D thematic mapper was accomplished by using selected channels of 24-channels aircraft multispectral scanner data. The purpose was to simulate thematic mapper 30-meter resolution imagery and compare its spectral quality with the original aircraft MSS data and determine changes in thematic classification accuracy for the simulated imagery. The original resolution of approximately 7.5 meters IFOV and simulated resolution of 15, 30, and 60 meters were used to indicate the trend of spectral quality and classification accuracy. The study was based in a 6.5 square kilometer area of urban Los Angeles having a diversity of land use.

Clark, J.↗

NASA NTRS1977

Landsat-D thematic mapper simulation using aircraft multispectral scanner data

A simulation of imagery from the upcoming Landsat-D Thematic Mapper was accomplished by using selected channels of aircraft 24-channel multispectral scanner data. The purpose was to simulate Thematic Mapper 30-meter resolution imagery, to compare its spectral quality with the original aircraft MSS data, and to determine changes in thematic classification accuracy for the simulated imagery. The original resolution of approximately 7.5 meters IFOV and simulated resolution of 15, 30, and 60 meters were used to indicate the trend of spectral quality and classification accuracy. The study was based in a 6.5 square kilometer area of urban Los Angeles having a diversity of land use. The original imagery was reduced in resolution by two related methods: pixel matrix averaging, and matrix smoothing with a unity box filter, followed by matrix averaging. Thematic land use classification using training sites and a Bayesian maximum-likelihood algorithm was performed at three levels of standard deviation - 1.0, 2.0, and 3.0 sigma. Plots of relative standard deviation showed that for larger training sites with a normal distribution of data, as the resolution decreased, the distribution range of density values decreased. Also, the classification accuracies for three levels of standard deviation increased as resolution decreased. However, the indication is that a point of diminishing returns had been reached, and 30 meters IFOV should be the best for multispectral classification of urban scenes.

Clark, J.↗

NASA NTRS1977

Integration of socioeconomic data and remotely sensed imagery for land use applications

The Image Based Information System (IBIS) uses techniques of digital image processing to interface geocoded data sets, information management systems, thematic maps, and remotely sensed imagery. For two cases IBIS has been used to integrate remotely sensed imagery and socioeconomic data. In the first case thematically classified Landsat imagery covering Orange County, California is combined with census tracts and municipalities. In the second case, thematically classified Landsat imagery over Los Angeles, California is combined with census tracts.

Bryant, N. A.↗

NASA NTRS1977

Techniques for the creation of land use maps and tabulations from Landsat imagery

Methods for creating color thematic maps and land use tabulations, employing both Landsat imagery and computer image processing, are discussed. The system, the Multiple Input Land Use System (MILUS) has been tested in the metropolitan section of Dayton, Ohio. Training areas for land use were first digitized by coordinates and then transformed onto an image of white lines on a black background. This image was added to a Landsat image of the same area. Then multispectral classification was performed. A tape of digitized census tract boundaries was computer interfaced to yield an image of tract boundaries on a background registered to the thematic land-use map. Using a data management system, the data were then used to produce figures for the area and percent of land use in each tract. Future work is expected to convert most of the steps into interactive processing. This would greatly reduce the time needed to edit and register the data sets.

Angelici, G. L.↗

NASA NTRS1977

Tabular data base construction and analysis from thematic classified Landsat imagery of Portland, Oregon

A systematic verification of Landsat data classifications of the Portland, Oregon metropolitan area has been undertaken on the basis of census tract data. The degree of systematic misclassification due to the Bayesian classifier used to process the Landsat data was noted for the various suburban, industrialized and central business districts of the metropolitan area. The Landsat determinations of residential land use were employed to estimate the number of automobile trips generated in the region and to model air pollution hazards.

Bryant, N. A.↗

NASA NTRS1977

Techniques for land use change detection using Landsat imagery

A variety of procedures were developed for the delineation of areas of land use change using Landsat Multispectral Scanner data and the generation of statistics revealing the nature of the changes involved (i.e., number of acres changed from rural to urban). Techniques of the Image Based Information System were utilized in all stages of the procedure, from logging the Landsat data and registering two frames of imagery, to extracting the changed areas and printing tabulations of land use change in acres. Two alternative methods of delineating land use change are presented while enumerating the steps of the entire process. The Houston, Texas urban area, and the Orlando, Florida urban area, are used as illustrative examples of various procedures.

Angelici, G. L.↗

NASA NTRS1976

LUMIS Interactive graphics operating instructions and system specifications

The LUMIS program has designed an integrated geographic information system to assist program managers and planning groups in metropolitan regions. Described is the system designed to interactively interrogate a data base, display graphically a portion of the region enclosed in the data base, and perform cross tabulations of variables within each city block, block group, or census tract. The system is designed to interface with U. S. Census DIME file technology, but can accept alternative districting conventions. The system is described on three levels: (1) introduction to the systems's concept and potential applications; (2) the method of operating the system on an interactive terminal; and (3) a detailed system specification for computer facility personnel.

Bryant, N. A.↗

NASA NTRS1976

IBIS - A geographic information system based on digital image processing and image raster datatype

IBIS (Image Based Information System) is a geographic information system which makes use of digital image processing techniques to interface existing geocoded data sets and information management systems with thematic maps and remotely sensed imagery. The basic premise is that geocoded data sets can be referenced to a raster scan that is equivalent to a grid cell data set. The first applications (St. Tammany Parish, Louisiana, and Los Angeles County) have been restricted to the design of a land resource inventory and analysis system. It is thought that the algorithms and the hardware interfaces developed will be readily applicable to other Landsat imagery.

Bryant, N. A.↗

NASA NTRS1976

Data management in pattern recognition and image processing systems

Data management considerations are important to any system which handles large volumes of data or where the manipulation of data is technically sophisticated. A particular problem is the introduction of image-formatted files into the mainstream of data processing application. This report describes a comprehensive system for the manipulation of image, tabular, and graphical data sets which involve conversions between the various data types. A key characteristic is the use of image processing technology to accomplish data management tasks. Because of this, the term 'image-based information system' has been adopted.

Zobrist, A. L.↗