Engineering topics
Publications and source records attributed to Bruno, R..
A proposed technique for compensating gravity-induced structural deformations on the main reflector of a large aperture antenna is to utilize a deformable flat plate (DFP) installed at one of the mirror locations in the beam waveguide optics.
Within the past decade there has been a remarkable production of papers both theoretical and observational that have shed some light on the intriguing and unsolved problem of the Alfvenic MHD turbulence in the solar wind. Although the scientific community has agreed upon many points which are at the basis of the temporal and radial evolution of the turbulence like the solar origin of most of the outward Alfven modes or the importance of non-linear interactions between outward and inward modes. there are still many open issues which are of fundamental importance for a complete understanding of the phenomenon. One of these key-issues is about the real nature of these inward modes. are they real propagating Alfven waves or rather static structures convected by the wind or a mixture of both? The present analysis represents an effort towards a better understanding of the nature and the role of these modes.
Using the satellite measurements of the velocity field in the interplanetary plasma. we present some analysis which show the presence of a self-similar intermittent state in the solar wind turbulence. We used the so called Extended Self-Similarity hypothesis, which is well visible in the solar wind turbulence, showing convincing evidences for the presence of universal anomalous scaling laws. Through the Extended Self-Similarity we are able to calculate the scaling exponents of the velocity structure functions with very small uncertainties, and we show that these scaling exponents are in very good agreement with the multifractal models describing intermittency in magnetohydrodynamic flows.
Previous analytical studies have shown the feasibility of using a limited number of active members to adaptively alter the structural shape or behavior to other desired states. As a demonstration of this concept, this paper describes the results of a sequence of validation tests, their correlation with the analytical results, and the problems encountered.
The optimal actuator placement problem encompasses finding their best locations and best gains. The latter is referred to as tuning the actuators. This paper deals with tuning a given set of actuators in presence of known structural nonlinearities arising from gaps at some joints. For this purpose, an efficient neural network-based algorithm is proposed and illustrated using numerical simulations.
Previous analytical studies have shown the feasibility of using a limited number of active members to adaptively alter the structural shape or behavior to other desired states. As a demonstration of this concept, this paper describes the results of a sequence of validation tests, their correlation with the analytical results, and the problems encountered. An existing full scale, space-erectable, high precision truss structure was used. For the most part, the results showed good agreement with the analysis. However, micron level nonlinearities in the structural behavior were discovered. The significance of the presence of these nonlinearities in precision structures and their impact on the basic premise of adaptivity are discussed.
A reference concept and implementation relevant to the application of Code Phase Division Multiple Access (CPDMA) to a high capacity satellite communication system providing 16 Kbps single hop channels between Very Small Aperture Terminals (VSAT's) is described. The description includes a potential implementation of an onboard CPDMA bulk demodulator/converter utilizing programmable charge coupled device (CCD) technology projected to be available in the early 1990's. A high level description of the system architecture and operations, identification of key functional and performance requirements of the system elements, and analysis results of end-to-end system performance relative to key figures of merit such as spectral efficiency are also provided.
The underlying mathematical formulation and issues associated with integrated control, structure, and optical design are discussed. Topics addressed include the development of cost functionals, optimization in the vector objective setting, and computational aspects of the optimization problem with special emphasis on model reduction strategies. Results on simple design problems are presented.
An approach to combined control-structural optimization aimed at enhancing early design trade-offs is outlined and illustrated by numerical examples. The approach employs a homotopic strategy and is capable of generating families of designs that can be used in early trade studies. Analytical results are obtained for classes of structure/control objectives with LQG and LQR costs. For these, it is demonstrated that global optima can be computed for small values of the homotopy parameter.
This paper outlines the development of methods for the combined control-structure optimization of physical systems encountered in the technology of large space structures. The objectives of the approach taken in this paper is not to produce the 'best' optimized design, but rather to efficiently produce a family of design options so as to assist in early trade studies, typically before hard design constraints are imposed. The philosophy is that these are candidate designs to be passed on for further considerations, and their function is more to guide the development of the system design rather than to represent the ultimate product. A homotopy approach involving multi-objective functions is developed for this purpose. Analytical and numerical examples are also presented.
This paper describes the design of the Laser Communication Transceiver (LCT) system which was planned to be flight tested as an attached payload on Space Station Freedom. The objective in building and flight-testing the LCT is to perform a broad class of tests addressing the critical aspects of space-based optical communications systems, providing a base of experience for applying laser communications technology toward future communications needs. The LCT's functional and performance requirements and capabilities with respect to acquisition, spatial tracking and pointing, communications, and attitude determination are discussed.
A homotopy approach involving multiobjective functions is developed to outline the methods that have evolved for the combined control-structure optimization of physical systems encountered in the technology of large space structures. A method to effect a timely consideration of the control performance prior to the finalization of the structural design involves integrating the control and structural design processes into a unified design methodology that combines the two optimization problems into a single formulation. This study uses the combined optimization problem as a family of weighted structural and control costs. Connections with vector optimizations are described; an analysis of the zero-set of required conditions is made, and a numerical example is given.
An approach for combined control-structure optimization keyed to enhancing early design trade-offs is outlined and illustrated by numerical examples. The approach employs a homotopic strategy and appears to be effective for generating families of designs that can be used in these early trade studies. Analytical results were obtained for classes of structure/control objectives with linear quadratic Gaussian (LQG) and linear quadratic regulator (LQR) costs. For these, researchers demonstrated that global optima can be computed for small values of the homotopy parameter. Conditions for local optima along the homotopy path were also given. Details of two numerical examples employing the LQR control cost were given showing variations of the optimal design variables along the homotopy path. The results of the second example suggest that introducing a second homotopy parameter relating the two parts of the control index in the LQG/LQR formulation might serve to enlarge the family of Pareto optima, but its effect on modifying the optimal structural shapes may be analogous to the original parameter lambda.
The optimal placement of discrete actuators and sensors is posed as a combinatorial optimization problem. Two examples for truss structures were used for illustration; the first dealt with the optimal placement of passive dampers along existing truss members, and the second dealt with the optimal placement of a combination of a set of actuators and a set of sensors. Except for the simplest problems, an exact solution by enumeration involves a very large number of function evaluations, and is therefore computationally intractable. By contrast, the simulated annealing heuristic involves far fewer evaluations and is best suited for the class of problems considered. As an optimization tool, the effectiveness of the algorithm is enhanced by introducing a number of rules that incorporate knowledge about the physical behavior of the problem. Some of the suggested rules are necessarily problem dependent.
The effective use of multiple passive and active members in adaptive structures necessitates that these members be optimally distributed throughout the structure. In truss structures, the problem falls into the class of combinatorial optimization for which the solution becomes exceedingly intractable as the problem size increases. This is overcome by using the simulated annealing algorithm to obtain near optimal locations for passive and/or active members. The maximization of the rate of energy dissipation over a finite time period as the measure of optimality is adopted. The selection of optimal locations for both passive and active members is consistently treated through the use of the energy dissipation rate criterion within the simulated annealing algorithm. Numerical examples are used to illustrate the effectiveness of the methodology for large truss structures.
NASA-Goddard has undertaken the development of direct-detection optical communications for space applications at the Gbps data rate channel capability level. The primary challenges to optical communications designers lie in the development of reliable optical power sources, as well as of high performance pointing/acquisition/tracking systems required by the narrow widths of the transmitted optical beams. GaAlAs diodes and their arrays are currently the most attractive technology for optical transmitters; pioneering work has also been conducted on dichroic and grating techniques for combining the power of several laser diodes. Attention is given to the performance obtained for an optical link acquisition and submicroradian tracking/pointing system.
This paper outlines the development of methods for the combined control-structure optimization of physical systems encountered in the technology of large space structures. The objective of the approach taken in this paper is not to produce the 'best' optimized design, but rather to efficiently produce a family of design options so as to asist in early trade studies, typically before hard design constraints are imposed. The philosophy is that these are candidate designs to be passed on for further consideration, and their function is more to guide the development of the system design rather than to represent the ultimate product. A homotopy approach involving multi-objective functions is developed for this purpose, and a numerical example is presented.
Plots of all the hourly averages computed from the solar magnetic field measurements obtained during the mission are given separately for Helios 1 and Helios 2. The magnitude and the direction of the averaged field are plotted versus the number of solar rotations as seen from Helios, counted from launch.