Engineering Papers⌕ Search

Engineering topics

Brummer, S. B.

Publications and source records attributed to Brummer, S. B..

16 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Feasibility study for a secondary Na/S battery

The feasibility of a moderate temperature Na battery was studied. This battery is to operate at a temperature in the range of 100-150 C. Two kinds of cathode were investigated: (1) a soluble S cathode consisting of a solution of Na2Sn in an organic solvent and (2) an insoluble S cathode consisting of a transition metal dichalcogenide in contact with a Na(+)ion conducting electrolyte. Four amide solvents, dimethyl acetamide, diethyl acetamide, N-methyl acetamide and acetamide, were investigated as possible solvents for the soluble S cathode. Results of stability and electrochemical studies using these solvents are presented. The dialkyl substituted amides were found to be superior. Although the alcohol 1,3-cyclohexanediol was found to be stable in the presence of Na2Sn at 130 C, its Na2Sn solutions did not appear to have suitable electrochemical properties.

Abraham, K. M.↗
NASA NTRS1973

Carbon monoxide detector

A sensitive carbon monoxide detector, developed specifically for spacecraft use, is described. An instrument range of 0 to 60 ppm CO in air was devised. The fuel cell type detector is used as a highly sensitive electrolysis cell for electrochemically detecting gases. The concept of an electrochemical CO detector is discussed and the CO oxidation behavior in phosphoric and sulfuric acid electrolytes is reported.

Holleck, G. L.↗
NASA NTRS1972

Stress corrosion of high strength aluminum alloys.

An investigation has been carried out to examine the relationship of the observed chemical and mechanical properties of Al-Cu and Al-Zn-Mg alloys to the stress corrosion mechanisms which dominate in each case. Two high purity alloys and analogous commercial alloys were selected. Fundamental differences between the behavior of Al-Cu and of Al-Zn-Mg alloys were observed. These differences in the corrosion behavior of the two types of alloys are augmented by substantial differences in their mechanical behavior. The relative cleavage energy of the grain boundaries is of particular importance.

Cocks, F. H.↗
NASA NTRS1970

Increased resistance to stress corrosion of aluminum alloys

Stress corrosion resistance is increased by distorting surface grain-boundary structure and by interrupting the corrosion and stress corrosion. The first is accomplished by machining or shot peening and the second by removal from and later reexposure to the corrosive environment.

Brummer, S. B.↗
NASA NTRS1967

Study of stress corrosion in aluminum alloys

Mechanism of the stress corrosion cracking of high-strength aluminum alloys was investigated using electrochemical, mechanical, and electron microscopic techniques. The feasibility of detecting stress corrosion damage in fabricated aluminum alloy parts by nondestructive testing was investigated using ultrasonic surface waves and eddy currents.

Brummer, S. B.↗