Engineering Papers⌕ Search

Engineering topics

Browning, N D

Publications and source records attributed to Browning, N D.

Nanosecond in situ transmission electron microscope studies of the reversible Ge{sub 2}Sb{sub 2}Te{sub 5} crystalline <==> amorphous phase transformation

Chalcogenide-based phase-change materials have wide use in optical recording media and are growing in importance for use in non-volatile electronic memory. For both applications, rapid switching between the amorphous and crystalline phases is necessary, and understanding the changes during rapidly driven phase transitions is of scientific and technological significance. Laser-induced crystallization and amorphization occur rapidly and changes in atomic structure, microstructure, and temperature are difficult to observe experimentally and determine computationally. We have used nanosecond-scale time-resolved diffraction with intense electron pulses to study Ge{sub 2}Sb{sub 2}Te{sub 5} during laser crystallization. Using a unique and unconventional specimen geometry, cycling between the amorphous and crystalline phases was achieved, enabling in situ transmission electron microscope (TEM) study of both microstructural and crystallographic changes caused by repeated switching. Finite element analysis was used to simulate interactions of the laser with the nano-structured specimens and to model the rapidly changing specimen temperature. Such time-resolved experimental methods combined with simulation of experimentally inaccessible physical characteristics will be fundamental to advancing the understanding of rapidly driven phase transformations.

36 MATERIALS SCIENCE↗

The effect of interfacial charge transfer on ferromagnetism in perovskite oxide superlattices

The structural, magnetic, and electrical properties of superlattices composed of the ferromagnetic/metal La{sub 0.7}Sr{sub 0.3}MnO{sub 3} and non-magnetic/metal La{sub 0.5}Sr{sub 0.5}TiO{sub 3} grown on (001)-oriented SrTiO{sub 3} substrates have been investigated. Using a combination of bulk magnetometry, soft x-ray magnetic spectroscopy, and scanning transmission electron microscopy, we demonstrate that robust ferromagnetic properties can be maintained in this superlattice system where charge transfer at the interfaces is minimized. Therefore, ferromagnetism can be controlled effectively through the chemical identity and the thickness of the individual superlattice layers.

36 MATERIALS SCIENCE↗

Towards an integrated materials characterization toolbox

The material characterization toolbox has recently experienced a number of parallel revolutionary advances, foreshadowing a time in the near future when material scientists can quantify material structure evolution across spatial and temporal space simultaneously. This will provide insight to reaction dynamics in four-dimensions, spanning multiple orders of magnitude in both temporal and spatial space. This study presents the authors’ viewpoint on the material characterization field, reviewing its recent past, evaluating its present capabilities, and proposing directions for its future development. Electron microscopy; atom probe tomography; x-ray, neutron and electron tomography; serial sectioning tomography; and diffraction-based analysis methods are reviewed, and opportunities for their future development are highlighted. Advances in surface probemicroscopy have been reviewed recently and, therefore, are not included [D.A.Bonnell et al.: Rev.Modern Phys. in Review]. In this study particular attention is paid to studies that have pioneered the synergetic use of multiple techniques to provide complementary views of a single structure or process; several of these studies represent the stateof- the-art in characterization and suggest a trajectory for the continued development of the field. Based on this review, a set of grand challenges for characterization science is identified, including suggestions for instrumentation advances, scientific problems in microstructure analysis, and complex structure evolution problems involving material damage. The future of microstructural characterization is proposed to be one not only where individual techniques are pushed to their limits, but where the community devises strategies of technique synergy to address complex multiscale problems in materials science and engineering.

characterization↗

Fundamental Mechanisms Driving the Amorphous to Crystalline Phase Transformation

Phase transformations are ubiquitous, fundamental phenomena that lie at the heart of many structural, optical and electronic properties in condensed matter physics and materials science. Many transformations, especially those occurring under extreme conditions such as rapid changes in the thermodynamic state, are controlled by poorly understood processes involving the nucleation and quenching of metastable phases. Typically these processes occur on time and length scales invisible to most experimental techniques ({micro}s and faster, nm and smaller), so our understanding of the dynamics tends to be very limited and indirect, often relying on simulations combined with experimental study of the ''time infinity'' end state. Experimental techniques that can directly probe phase transformations on their proper time and length scales are therefore key to providing fundamental insights into the whole area of transformation physics and materials science. LLNL possesses a unique dynamic transmission electron microscope (DTEM) capable of taking images and diffraction patterns of laser-driven material processes with resolution measured in nanometers and nanoseconds. The DTEM has previously used time-resolved diffraction patterns to quantitatively study phase transformations that are orders of magnitude too fast for conventional in situ TEM. More recently the microscope has demonstrated the ability to directly image a reaction front moving at {approx}13 nm/ns and the nucleation of a new phase behind that front. Certain compound semiconductor phase change materials, such as Ge{sub 2}Sb{sub 2}Te{sub 5} (GST), Sb{sub 2}Te and GeSb, exhibit a technologically important series of transformations on scales that fall neatly into the performance specifications of the DTEM. If a small portion of such material is heated above its melting point and then rapidly cooled, it quenches into an amorphous state. Heating again with a less intense pulse leads to recrystallization into a vacancy-stabilized metastable rock salt structure. Each transformation takes {approx}10-100 ns, and the cycle can be driven repeatedly a very large number of times with a nanosecond laser such as the DTEM's sample drive laser. These materials are widely used in optical storage devices such as rewritable CDs and DVDs, and they are also applied in a novel solid state memory technology - phase change memory (PCM). PCM has the potential to produce nonvolatile memory systems with high speed, extreme density, and very low power requirements. For PCM applications several materials properties are of great importance: the resistivities of both phases, the crystallization temperature, the melting point, the crystallization speed, reversibility (number of phase-transformation cycles without degradation) and stability against crystallization at elevated temperature. For a viable technology, all these properties need to have good scaling behavior, as dimensions of the memory cells will shrink with every generation. In this LDRD project, we used the unique single-shot nanosecond in situ experimentation capabilities of the DTEM to watch these transformations in GST on the time and length scales most relevant for device applications. Interpretation of the results was performed in conjunction with atomistic and finite-element computations. Samples were provided by collaborators at IBM and Stanford University. We observed, and measured the kinetics of, the amorphous-crystalline and melting-solidification transitions in uniform thin-film samples. Above a certain threshold, the crystal nucleation rate was found to be enormously high (with many nuclei appearing per cubic {micro}m even after nanosecond-scale incubation times), in agreement with atomistic simulation and consistent with an extremely low nucleation barrier. We developed data reduction techniques based on principal component analysis (PCA), revealing the complex, multi-dimensional evolution of the material while suppressing noise and irrelevant information. Using a novel specimen geometry, we also achieved repeated switching between the amorphous and crystalline phases enabling in situ study of structural change after phase cycling, which is relevant to device performance. We also observed the coupling between the phase transformations and the evolution of morphology on the nanometer scale, revealing the gradual development of striations in uniform films and preferential melting at sharp edges in laser-heated nanopatterned GST. This nonuniform melting, interpreted through simulation as being a direct result of geometrical laser absorption effects, appears to be responsible for a marked loss in morphological stability even at moderate laser intensities and may be an important factor in the longevity of nanostructured phase change materials in memory applications.

36 MATERIALS SCIENCE↗

In situ characterization of meals at extremes.

The fundamental processes taking place in metals under extreme conditions can occur on ultrafast timescales (i.e., nanoseconds to picoseconds), and yet their result can continue to have a significant impact on the structural properties for many years to follow. The challenge in developing in situ methods for characterization under extreme conditions therefore involves both the modification of the instrumentation to implement the high-temperature, strain, and radiation conditions and the definition of the timescale over which the measurement must be made. While techniques are well established for characterization of the long-term effects of extreme conditions, experiments are only just beginning to probe the initial stages of structural evolution. This article reviews recent developments in optical, x-ray, and electron probes of metals under extreme conditions and also discusses the needs for future experiments and potential pathways to achieving these goals.

36 MATERIALS SCIENCE↗

Rapid Laser Induced Crystallization of Amorphous NiTi Films Observed by Nanosecond Dynamic Transmission Electron Microscopy (DTEM)

The crystallization processes of the as-deposited, amorphous NiTi thin films have been studied in detail using techniques such as differential scanning calorimetry and, in-situ TEM. The kinetic data have been analyzed in terms of Johnson-Mehl-Avrami-Kolomogrov (JMAK) semi-empirical formula. The kinetic parameters determined from this analysis have been useful in defining process control parameters for tailoring microstructural features and shape memory properties. Due to the commercial push to shrink thin film-based devices, unique processing techniques have been developed using laser-based annealing to spatially control the microstructure evolution down to sub-micron levels. Nanosecond, pulse laser annealing is particularly attractive since it limits the amount of peripheral heating and unwanted microstructural changes to underlying or surrounding material. However, crystallization under pulsed laser irradiation can differ significantly from conventional thermal annealing, e.g., slow heating in a furnace. This is especially true for amorphous NiTi materials and relevant for shape memory thin film based microelectromechanical systems (MEMS) applications. There is little to no data on the crystallization kinetics of NiTi under pulsed laser irradiation, primarily due to the high crystallization rates intrinsic to high temperature annealing and the spatial and temporal resolution limits of standard techniques. However, with the high time and spatial resolution capabilities of the dynamic transmission electron microscope (DTEM) constructed at Lawrence Livermore National Laboratory, the rapid nucleation events occurring from pulsed laser irradiation can be directly observed and nucleation rates can be quantified. This paper briefly explains the DTEM approach and how it used to investigate the pulsed laser induced crystallization processes in NiTi and to determine kinetic parameters.

36 MATERIALS SCIENCE↗

Solving the Accelerator-Condenser Coupling Problem in a Nanosecond Dynamic Transmission Electron Microscope

We describe a modification to a transmission electron microscope (TEM) that allows it to briefly (using a pulsed-laser-driven photocathode) operate at currents in excess of 10 mA while keeping the effects of condenser lens aberrations to a minimum. This modification allows real-space imaging of material microstructure with a resolution of order 10 nm over regions several {micro}m across with an exposure time of 15 ns. This is more than 6 orders of magnitude faster than typical video-rate TEM imaging. The key is the addition of a weak magnetic lens to couple the large-diameter high-current beam exiting the accelerator into the acceptance aperture of a conventional TEM condenser lens system. We show that the performance of the system is essentially consistent with models derived from ray tracing and finite element simulations. The instrument can also be operated as a conventional TEM by using the electron gun in a thermionic mode. The modification enables very high electron current densities in {micro}m-sized areas and could also be used in a non-pulsed system for high-throughput imaging and analytical TEM.

47 OTHER INSTRUMENTATION↗

Time Resolved Annular Dark Field Imaging of Catalyst Nanoparticles

Dynamic transmission electron microscopy (DTEM) has the potential to provide insight into nanoparticle catalyst dynamics by obtaining direct images with high spatial and temporal resolution. To date, the limited signal to noise ratios attainable for dispersed nanoparticle samples have made such studies difficult to perform at the highest resolution. These limitations have been overcome by the fabrication of an annular objective lens aperture that permits images to be obtained with a 5 fold increase in the signal to background ratio. This annular dark field imaging mode is shown here to vastly improve the contrast attainable in 15ns pulsed electron images and allows particles as small as 30nm in diameter to be observed.

36 MATERIALS SCIENCE↗

Chemistry of Tantalum Clusters in Solution And on SiO(2) Supports: Analogies And Contrasts

Tantalum clusters have been synthesized from Ta(CH{sub 2}Ph){sub 5} on the surface of porous fumed SiO{sub 2}. When these clusters are small, incorporating, on average, several Ta atoms, their chemistry is similar to that of molecular tantalum clusters (and other early transition-metal) clusters. For example, The Ta-Ta bonds in these small supported clusters have been characterized by extended X-ray absorption fine structure (EXAFS), IR, and UV-vis spectroscopy, being similar to those in molecular analogues. The redox reactions of the supported clusters, characterized by X-ray absorption near-edge structure, are analogous to those of early transition-metal clusters in solution. In contrast to the largest of these clusters in solution and in the solid state, those supported on SiO{sub 2} are raftlike, facilitating the substantial metal-support-oxygen bonding that is evident in the EXAFS spectra. Samples consisting of tantalum clusters on SiO{sub 2} catalyze alkane disproportionation and the conversion of methane with n-butane to give other alkanes, but catalytic properties of analogous clusters in solution have barely been explored.

03 NATURAL GAS↗

Recognition of Melting of Nanoparticle Catalysts With Cubically Shaped Co(3)O(4) Nanoparticles

Cubically shaped cobalt oxide nanoparticle catalysts were used for the first time to investigate the melting of the nanoparticle catalysts responsible for the synthesis of silica nanocoils at 1050 C and straight nanowires at 1100 C. Cobalt nanoparticles remained morphologically highly anisotropic after the growth of nanocoils at 1050 C, whereas they became predominantly spherical after straight nanowires were made at 1100 C. These results strongly indicated that cobalt nanoparticles responsible for the synthesis of straight nanowires were completely molten and that melting occurred to these nanoparticles between 1050 and 1100 C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhanced Functionality for Materials Analysis in the DTEM

The recent explosion in the use of pump–probe studies on picosecond and shorter timescales to investigate structural and electronic phase transitions and the dynamics of chemical reactions has been based largely on laser–induced reactions coupled with laser interrogation techniques, or on laser induced reactions coupled with synchrotron radiation interrogation techniques. Much less attention has been given to approaches based on laser–induced (or electron–beam–induced) reactions coupled with electron interrogation methods, despite the fact that electron sources are brighter, and their interactions with matter stronger (thereby giving higher signal levels). The use of electrons as temporal probes has great potential for the study of complex transient events not only because of the high temporal resolution attainable by ultrafast electron diffraction (UED) but also the potential for direct high spatial resolution imaging using dynamic transmission electron microscopy (DTEM). However, taking this potential for electron interrogation methods and turning it into a routine nanoscale characterization technique requires several key aspects of the instrumentation used for electron microscopy/diffraction to be optimized. In this work, several approaches to instrument optimization for DTEM and UED (to be performed in the same instrument) are being addressed.

99 GENERAL AND MISCELLANEOUS↗

Strongly Driven Crystallization Processes in a Metallic Glass

The crystallization of amorphous NiTi thin films was studied in situ using pulsed laser heating in a dynamic transmission electron microscope. A single pulse can crystallize small areas of the film within 2 {micro}s. The crystallized volume fraction and morphology depend strongly on the laser energy, the laser spatial profile, and the heat transport in the film. As compared to slower furnace and continuous wave laser annealing, pulsed laser heating produces a dramatically different microstructure. Higher than expected crystallization rates were observed under pulsed irradiation that do not correlate with kinetic data obtained from the slow-heating crystallization experiments.

36 MATERIALS SCIENCE↗