Engineering topics

Brown, Rebecca McKenzie

Publications and source records attributed to Brown, Rebecca McKenzie.

6 records

DOE OSTI2024

Mechanical and biochemical recovery of landfill waste in an underserved community

Historically in the United States, waste collected for recycling has been sold and shipped to processors in China. In 2013 and 2018, China introduced the Green Fence and National Sword policies which restricts the import of contaminated materials and banned the import of many recyclables. The cost of recycling in the United States has increased following these policy changes, which has led to many communities reducing their recycling programs or halting them altogether. Rural and underserved communities that don’t have resources to afford sophisticated recycling programs have been heavily impacted. Previous work at INL demonstrated that MSW is a potentially viable feedstock for both biochemical and thermochemical conversion. The goal of this project is to assess preprocessing tools that can produce consistent feedstocks that meet conversion specifications, remove problematic contaminants, and reduce the amount of waste that is landfilled. Municipal solid waste was collected from an underserved community in southeast Idaho, contaminants were characterized, and mechanically separated into two discrete fractions. The unit operations identified during mechanical separation trials will be mobilized to on-site with a goal of 50% recovery of paper and plastic waste.

09 - BIOMASS FUELS↗

DOE OSTI2023

Chapter Four—MSW characterization and preprocessing for biofuels and bioproducts

The organic fraction of MSW (OFMSW) has a high carbohydrate and lipid content, indicating its good potential as a feedstock for bioethanol and biodiesel production. However, variability in feedstock composition for MSW is a critical challenge for downstream conversion processes such as pyrolysis, gasification, incineration, and biotechnological conversion. MSW characterization is critical to inform and optimize the design of physical handling processes to minimize costs and environmental impacts, and improve the downstream conversion performance of MSW materials. Here, this book chapter focuses on current MSW characterization and preprocessing technologies and discusses the costs, benefits, and environmental impacts associated with MSW preprocessing. Also, the book chapter outlines the potential strategies to increase total revenue and mitigate negative environmental impacts for MSW recycling systems.

09 BIOMASS FUELS↗

DOE OSTI2022

Current nature-based biological practices for rare earth elements extraction and recovery: Bioleaching and biosorption

There is a growing demand for advancing products and renewable technologies worldwide that rely on rare earth elements (REEs), including those directly necessary for a low-carbon energy transition, national security applications, and consumer electronics. This study focuses on current nature-based biological methods (i.e., bioleaching and biosorption) for REEs extraction from electronic wastes (e-wastes) and ore deposits. Herein, comprehensive narrative and systematic reviews of bioleaching and biosorption extraction methods are performed to identify their sustainability challenges and benefits, and highlight the potential pathways that would address the existing gaps. From the narrative review, it is evident that biological methods for REEs extraction are more environmentally friendly than conventional methods currently used in the REE mining industry (e.g., acid leaching and solvent extraction). From the systematic review, it is clear that bioleaching and biosorption research has been a rapidly growing field of interest over the last 10 years, particularly for precious metals extraction (e.g., copper and gold). From both reviews, it is apparent that REEs extraction from domestic ore deposits alone is inadequate, and sustainable REEs recovery from e-wastes is also necessary to meet the growing REEs demand. It is concluded that targeted mixed REEs extraction for specific products can be a potential pathway for sustainable REEs extraction from both ore and e-wastes that would reduce separation costs and emissions from the associated use of harsh chemicals. It is further concluded that nature-based biological REE extraction solutions offer an opportunity to generate significant socio-economic and environmental benefits.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

MSW Decontamination: Methods to Improve Biofuel Yields

MSW is usually contaminated with a variety of undesirable materials (food, chemicals, glass, metal) that can impact downstream applications such as conversion to biofuels. This presentation will showcase two decontamination methods using either a detergent wash or an organic solvent extraction to demonstrate up to 30% increase in biofuel precursor yields for plastic and paper MSW. The economics of the two decontamination methods will also be presented.

09 BIOMASS FUELS↗

DOE OSTI2021

Exploring filamentous fungi depolymerization of corn stover in the context bioenergy queuing operations

Recalcitrance of lignocellulosic feedstocks to depolymerization is a significant barrier for bioenergy production approaches that require conversion of monomeric carbohydrates to renewable energy sources. This study assesses how low-cost modifications in the feedstock supply chain can be transformed into targeted pretreatments in the context of the entire bioenergy supply chain. The aim of this research is to overcome the physiochemical barriers in corn stover that necessitate increased severity in conversion in terms of chemical loading, temperature, and residence time. Corn stover samples were inoculated with a selective (Ceriporiopsis subvermispora) and non-selective (Phaenarochaete chrysosporium) lignin degrading filamentous fungal strains, then stored aerobically to determine the working envelope for fungal pretreatment to achieve lignin degradation. Dry matter loss and gross chemical makeup of corn stover varied by the length of treatment (2 and 4 weeks) and by the moisture content of the treated corn stover samples (40 and 60%, wet basis). Dry matter loss in P. chrysosporium inoculated biomass was elevated compared to the C. subvermispora inoculated biomass; however, treatment also induced additional chemical composition changes suggestive of depolymerization. Scanning electron microscope images reveal hyphae attached within cell lumen and suggest structural changes within P. chrysosporium treated corn stover after 60% moisture storage. These results highlight that fungal treatment approaches must balance loss of convertible material with the potential for reduction in recalcitrance. Techno-economic assessment (TEA) of fungal pretreatment in a short-term queuing system indicated the viability of this approach compared to conventional queuing operations. The total queuing system cost was estimated at $\$$1.65/tonne of biomass stored. After applying the credit of $\$$1.48/tonne from energy savings in the conversion phase using fungal pretreated biomass, the total system cost was $0.80 lower than traditional biomass queueing approach. While the TEA results suggested that treating biomass with C. subvermispora is the most economically viable storage method in the designed fungal-assisted queuing system, future research should focus on additional fungal depolymerization such as those observed in the P. chrysosporium inoculated biomass.

09 BIOMASS FUELS↗

DOE OSTI2021

Screening of alkali-assisted storage conditions to define the operational window of deacetylation within storage systems in the bioenergy supply chain

Overcoming biomass heterogeneity and associated recalcitrance to thermal, chemical, and enzymatic depolymerization is a necessary but challenging aspect of valorizing lignocellulosic biomass to fuels and chemicals. Here, this study explores how this recalcitrance can be reduced during the supply chain unit operation of storage, which is required for seasonally harvested agricultural residues to maintain constant throughput at a biorefinery. In this work, partial alkali pretreatment was performed just prior to corn stover entering storage, which had the benefit of providing a high pH environment entering storage such that soluble sugars were preserved and saponified acetyl groups in hemicellulose. This work investigated a range of viable conditions where saponification and preservation occur simultaneously by varying the moisture content (40% and 60%) and concentrations of sodium hydroxide (low and high) during aerobic and anaerobic storage. Anaerobic conditions preserved overall dry matter below 5% in the three scenarios evaluated, and the highest alkali loading solubilized up to 15% lignin, 18% xylan, and 50% of acetate, meanwhile doubling the extractable components. Scanning electron microscopy images highlighted potential physical impacts including cell-wall disruption near vascular bundles, pitting within parenchyma cells, and cell-wall distortion. Techno-economic assessment indicated that this storage approach and associated logistics system is economically competitive with a conventional approach using low-moisture bales.

09 BIOMASS FUELS↗