Engineering Papers⌕ Search

Engineering topics

Brown, J.

Publications and source records attributed to Brown, J..

At least 37 records · Page 2

Design of a Three-Layer Impactor for Material Strength Measurements at Multi-Megabar Pressures

Off-Hugoniot loading methods for dynamic compression have been a topic of interest for many years as a means of accessing high pressures without melting a material. Simulations and an initial test experiment of a three-layer gas-gun impactor suitable for use in measuring dynamic material strength at multi-megabar pressures are described. As shown through ARES hydrocode simulations, an impactor consisting of a low-, medium-, and high-impedance material, such as TPX, Al, and Ta or Pt, can produce a quasi-isentropic loading path up to 4.6 Mbar pressure with a low homologous temperature (T/T melt = 0.1–0.25). These impactors can also be tailored to create a pressure drive suitable for a Lagrangian sound speed experiment. Simulated in-situ velocities were analyzed to determine the change in calculated strength due to non-uniformity in the impactor, which provides a measure of error sensitivity. An initial test of a three-layer projectile onto a flat target at 4.4 km/s impact velocity is reported. Finally, while the impactor incurred some delamination during firing, the measured sample/window interface velocity generally agrees with the simulated peak velocity and subsequent release, indicating the feasibility of this approach for measuring material strength.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

AMPX Support for GNDS-2.1 [Slides]

This presentation is a review of AMPX strategy for GNDS. It includes a summary of point data comparison, Summary of covariance data comparison, and a preview of SAMMY GNDS I/O and other development.

ENDF↗

Unresolved resonance region cross section measurements and validation [Slides]

This presentation discusses the ENDF format and its implication for experimental data. The effect of self-shielding on measured cross sections some call this effect transmission enhancement (to be explained). Additionally discussed: from experiment to evaluation. And finally, Processing “high energy resolution” transmission for URR evaluation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

PETSc/TAO Users Manual V.3.21

This manual describes the use of the Portable, Extensible Toolkit for Scientific Computation (PETSc) and the Toolkit for Advanced Optimization (TAO) for the numerical solution of partial differential equations (PDEs) and related problems on high-performance computers. PETSc/TAO is a suite of data structures and routines that provide the building blocks for implementing large-scale application codes on parallel (and serial) computers. PETSc uses the MPI standard for all distributed memory communication. PETSc/TAO includes a large suite of parallel linear solvers, nonlinear solvers, time integrators, and optimizers that may be used in application codes written in Fortran, C, C++, and Python (via petsc4py; see Getting Started ). The library is organized hierarchically, enabling users to employ the abstraction level most appropriate for a particular problem. By using techniques of object-oriented programming, PETSc provides enormous flexibility for users.

97 MATHEMATICS AND COMPUTING↗

AMPX Developments in FY2023 [Slides]

This presentation deals with AMPX development in FY2023 focused on preparing for the release and testing of ENDF/B-VIII.1. It includes updates for Thermal Scattering Law in ENDF/B-VIII.1. The presentation finishes with touching on resolution of a SCALE Issue with thermal kernels and photonuclear physics support.

97 MATHEMATICS AND COMPUTING↗

ORNL Nuclear Data Evaluation Contribution to NCSP (ND-2) [Slides]

This presentation is titled ORNL Nuclear Data Evaluation Contribution to NCSP (ND-2). This lecture includes resonance evaluations, SAMMY fitting results, and resonance evaluation features. The presentation finishes with evaluations in alkaline earth-metals and halogens.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

AMPX Developments in 2024 [Slides]

The priority for AMPX development for FY2024 has been to support processing the ENDF/B-VIII.1 library. This includes the development to support Thermal Neutron Scattering Library, GNDS-2.1 support and AMPX maintenance, and transport libraries for SCALE 7.0.0.

Nuclear Criticality Safety Program (NCSP)↗

AMPX Status 2023 [Slides]

This presentation starts off with covering general ENDF issues encountered. With a look into issues particular to thermal scattering library. This presentation includes AMPX Development Highlights. The talk concludes with the status of the AMPX Photonuclear Sublibrary Support.

97 MATHEMATICS AND COMPUTING↗

PETSc/TAO Users Manual (Rev. 3.20)

This manual describes the use of the Portable, Extensible Toolkit for Scientific Computation (PETSc) and the Toolkit for Advanced Optimization (TAO) for the numerical solution of partial differential equations and related problems on high-performance computers. PETSc/TAO is a suite of data structures and routines that provide the building blocks for the implementation of large-scale application codes on parallel (and serial) computers. PETSc uses the MPI standard for all distributed memory communication.

97 MATHEMATICS AND COMPUTING↗

ICARUS at the Fermilab Short-Baseline Neutrino program: initial operation

The ICARUS collaboration employed the 760-ton T600 detector in a successful 3-year physics run at the underground LNGS laboratory, performing a sensitive search for LSND-like anomalous $\nu _e$ appearance in the CERN Neutrino to Gran Sasso beam, which contributed to the constraints on the allowed neutrino oscillation parameters to a narrow region around 1 eV$^2$. After a significant overhaul at CERN, the T600 detector has been installed at Fermilab. In 2020 the cryogenic commissioning began with detector cool down, liquid argon filling and recirculation. ICARUS then started its operations collecting the first neutrino events from the booster neutrino beam (BNB) and the Neutrinos at the Main Injector (NuMI) beam off-axis, which were used to test the ICARUS event selection, reconstruction and analysis algorithms. ICARUS successfully completed its commissioning phase in June 2022. The first goal of the ICARUS data taking will be a study to either confirm or refute the claim by Neutrino-4 short-baseline reactor experiment. ICARUS will also perform measurement of neutrino cross sections with the NuMI beam and several Beyond Standard Model searches. After the first year of operations, ICARUS will search for evidence of sterile neutrinos jointly with the Short-Baseline Near Detector, within the Short-Baseline Neutrino program. In this paper, the main activities carried out during the overhauling and installation phases are highlighted. Preliminary technical results from the ICARUS commissioning data with the BNB and NuMI beams are presented both in terms of performance of all ICARUS subsystems and of capability to select and reconstruct neutrino events.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Status of GNDS Support in AMPX [Slides]

This presentation covers the status of GNDS Support in AMPX. This presentation covers an overview of GNDS support in AMPX. Then the presentation touches on the AMPX process in GNDS and a checklist. This presentation concludes with a continuing effort section and conclusions.

97 MATHEMATICS AND COMPUTING↗

AMPX and ENDF/B-VIII.1 Thermal Scattering Library [Slides]

This presentation provides an enlightening discussion of AMPX and ENDF/B-VIII.1. The talk begins with general ENDF issues encountered. Then narrows down into Issues particular to thermal scattering library. Such as the need for clear communication of the intended use for the file and the question of “Which graphite should I use in model?”. The presentation then looks at TSL files with many Bragg peaks are driving a change in SCALE CE library format and transport codes. This lecture concludes with a look at usage of thermal kernels with sharp peaks with the issues encountered using ENDF/B-VIII.0 data and resolved.

97 MATHEMATICS AND COMPUTING↗

River Delta Morphotypes Emerge From Multiscale Characterization of Shorelines

Abstract Delta shoreline structure has long been hypothesized to encode information on the relative influence of fluvial, wave, and tidal processes on delta formation and evolution. We introduce here a novel multiscale characterization of shorelines by defining three process‐informed morphological metrics. We show that this characterization yields self‐emerging classes of morphologically similar deltas, that is, delta morphotypes, and also predicts the dominant forcing of each morphotype. Then we show that the dominant forcings inferred from shoreline structure generally align with those estimated via relative sediment fluxes, while positing that misalignments arise from spatiotemporal heterogeneity in deltaic sediment fluxes not captured in their estimates. The proposed framework for shoreline characterization advances our quantitative understanding of how shoreline features reflect delta forcings, and may aid in deciphering paleoclimate from images of ancient deposits and projecting delta morphologic response to changes in sediment fluxes.

Vulis, L.↗

PETSc/TAO Users Manual (Rev. 3.19)

This manual describes the use of the Portable, Extensible Toolkit for Scientific Computation (PETSc) and the Toolkit for Advanced Optimization (TAO) for the numerical solution of partial differential equations and related problems on high-performance computers. PETSc/TAO is a suite of data structures and routines that provide the building blocks for the implementation of large-scale application codes on parallel (and serial) computers. PETSc uses the MPI standard for all distributed memory communication. PETSc/TAO includes a large suite of parallel linear solvers, nonlinear solvers, time integrators, and opti mization that may be used in application codes written in Fortran, C, C++, and Python (via petsc4py; see Getting Started). PETSc provides many of the mechanisms needed within parallel application codes, such as parallel matrix and vector assembly routines. The library is organized hierarchically, enabling users to employ the level of abstraction that is most appropriate for a particular problem. By using techniques of object-oriented programming, PETSc provides enormous flexibility for users. PETSc is a sophisticated set of software tools; as such, for some users it initially has a much steeper learning curve than packages such as MATLAB or a simple subroutine library. In particular, for individuals without some computer science background, experience programming in C, C++, python, or Fortran and experience using a debugger such as gdb or lldb, it may require a significant amount of time to take full advantage of the features that enable efficient software use. However, the power of the PETSc design and the algorithms it incorporates may make the efficient implementation of many application codes simpler than “rolling them” yourself. For many tasks a package such as MATLAB is often the best tool; PETSc is not intended for the classes of problems for which effective MATLAB code can be written. There are several packages, built on PETSc, that may satisfy your needs without requiring directly using PETSc. We recommend reviewing these packages functionality before starting to code directly with PETSc. PETSc can be used to provide a “MPI parallel linear solver” in an otherwise sequential, or OpenMP parallel code. This approach cannot provide extremely large improvements in the application time by utilizing large numbers of MPI processes but can still improve the performance. Certainly all parts of a previously sequential code need not be parallelized but the matrix generation portion must be parallelized to expect true scalability to large numbers of MPI processes. See PCMPI for details on how to utilize the PETSc MPI linear solver server. Since PETSc is under continued development, small changes in usage and calling sequences of routines will occur. PETSc has been supported for twenty-five years; see mailing list information on our website for information on contacting support.

97 MATHEMATICS AND COMPUTING↗

AMPX and SCALE Nuclear Data Libraries for Depletion [Slides]

This presentation touches on AMPX and SCALE nuclear data libraries for depletion. AMPX is a nuclear data processing code suite that generates continuous-energy and multigroup neutron and gamma libraries used in SCALE and VERA, covariance data used in S/U calculations, and depletion, activation and decay origin data for Oak Ridge Isotope Generation code (ORIGEN).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

AMPX Developments in FY2022 [Slides]

This talk centers on AMPX developments in fiscal year of 2022. This presentation provides links to the open-source subset of SCALE, including AMPX. The discussion additionally provides an overview of GNDS support in AMPX. The presentation includes selected features on several SCALE versions and features.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗