Engineering Papers⌕ Search

Engineering topics

Brown, D.

Publications and source records attributed to Brown, D..

At least 109 records · Page 6

$B^{0}_{s}$ lifetime measurement in the CP-odd decay channel $B^{0}_{s} \to J/\psi f_{0}(980)$

The lifetime of the Bs0 meson is measured in the decay channel Bs0→J/ψπ+π- with 880≤Mπ+π-≤1080 MeV/c2, which is mainly a CP-odd state and dominated by the f0(980) resonance. In 10.4 fb-1 of data collected with the D0 detector in Run II of the Tevatron, the lifetime of the Bs0 meson is measured to be τ(Bs0)=1.70±0.14(stat)±0.05(syst) ps. Neglecting CP violation in Bs0/B¯s0 mixing, the measurement can be translated into the width of the heavy mass eigenstate of the Bs0, ΓH=0.59±0.05(stat)±0.02(syst) ps-1.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Detailed requirements for a next generation nuclear data structure.

This document attempts to compile the requirements for the top-levels of a hierarchical arrangement of nuclear data such as found in the ENDF format. This set of requirements will be used to guide the development of a new data structure to replace the legacy ENDF format.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The BLAIRR Irradiation Facility Hybrid Spallation Target Optimization

BLAIRR STUDY STATUS OVERVIEW Beamline Complex Evaluation/Assessment and Adaptation to the Goals Facility Radiological Constraints ? Large scale analyses of conventional facility and integrated shield (concrete, soil)Target Optimization and Design: Beam-target interaction optimization Hadronic interaction and energy deposition limitations Single phase and Hybrid target concepts Irradiation Damage Thermo-mechanical considerations Spallation neutron fluence optimization for (a) fast neutron irradiation damage (b) moderator/reflector studies, (c) NTOF potential and optimization (d) mono-energetic neutron beam

36 MATERIALS SCIENCE↗

Study of double parton interactions in diphoton + dijet events in $p\bar{p}$ collisions at $\sqrt{s} = 1.96$ TeV

We use a sample of diphoton+dijet events to measure the effective cross section of double parton interactions, which characterizes the area containing the interacting partons in proton-antiproton collisions, and find it to be σeff=19.3±1.4(stat)±7.8(syst) mb. The sample was collected by the D0 detector at the Fermilab Tevatron collider in pp¯ collisions at s=1.96 TeV and corresponds to an integrated luminosity of 8.7 fb-1.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Evidence for Simultaneous Production of J/ψ and Υ Mesons

We report evidence for the simultaneous production of J/ψ and Υ mesons in 8.1 fb$^{-1}$of data collected at $\sqrt{s}$ = 1.96 TeV by the D0 experiment at the Fermilab $p\bar{p}$ Tevatron Collider. Events with these characteristics are expected to be produced predominantly by gluon-gluon interactions. In this analysis, we extract the effective cross section characterizing the initial parton spatial distribution, σ$_{eff}$=2.2±0.7(stat)±0.9(syst) mb.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Neutron and X-ray powder diffraction study of skutterudite thermoelectrics

N- and p-type filled-skutterudite materials prepared for thermoelectric power generation modules were analyzed by neutron diffraction at the POWGEN beam line of the Spallation Neutron Source (SNS) and X-ray diffraction (XRD). The skutterudite powders were processed by melt spinning, followed by ball milling and annealing. The n-type material consists of Ba–Yb–Co–Sb and the p-type material consists of Di–Fe–Ni–Sb or Di–Fe–Co–Sb (Di = didymium, an alloy of Pr and Nd). Powders for prototype module fabrication from General Motors and Marlow Industries were analyzed in this study. XRD and neutron diffraction studies confirm that both the n- and p-type materials have cubic symmetry. Structural Rietveld refinements determined the lattice parameters and atomic parameters of the framework and filler atoms. The cage filling fraction was found to depend linearly on the lattice parameter, which in turn depends on the average framework atom size. Ultimately, this knowledge may allow the filling fraction of these skutterudite materials to be purposefully adjusted, thereby tuning the thermoelectric properties.

36 MATERIALS SCIENCE↗

Assessment of MARMOT Grain Growth Model

This report assesses the MARMOT grain growth model by comparing modeling predictions with experimental results from thermal annealing. The purpose here is threefold: (1) to demonstrate the validation approach of using thermal annealing experiments with non-destructive characterization, (2) to test the reconstruction capability and computation efficiency in MOOSE, and (3) to validate the grain growth model and the associated parameters that are implemented in MARMOT for UO 2 . To assure a rigorous comparison, the 2D and 3D initial experimental microstructures of UO 2 samples were characterized using non-destructive Synchrotron x-ray. The same samples were then annealed at 2273K for grain growth, and their initial microstructures were used as initial conditions for simulated annealing at the same temperature using MARMOT. After annealing, the final experimental microstructures were characterized again to compare with the results from simulations. So far, comparison between modeling and experiments has been done for 2D microstructures, and 3D comparison is underway. The preliminary results demonstrated the usefulness of the non-destructive characterization method for MARMOT grain growth model validation. A detailed analysis of the 3D microstructures is in progress to fully validate the current model in MARMOT.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

New edge magnetoplasmon interference like photovoltage oscillations and their amplitude enhancement in the presence of an antidot lattice

We present new photovoltage oscillation in a pure two dimensional electron gas (2DEG) and in the presence of circular or semicircular antidot lattices. Results were interpreted as EMPs-like photovoltage oscillations. We observed and explained the photovoltage oscillation amplitude enhancement in the presence of an antidot lattice with regard to the pure 2DEG. The microwave frequency excitation range is 139 – 350 GHz. The cyclotron and magnetoplasmon resonances take place in the magnetic field range 0.4 – 0.8 T. This original experimental condition allows edge magnetoplasmons EMPs interference like observation at low magnetic field, typically B < B{sub c} where B{sub c} is the magnetic field at which the cyclotron resonance takes place. The different oscillation periods observed and their microwave frequency dependence were discussed. For 139 and 158 GHz microwave excitation frequencies, a unique EMPs-like interference period was found in the presence of antidots whereas two periods were extracted for 295 or 350 GHz. An explanation of this effect is given taking account of strong electron interaction with antidot at low magnetic field. Indeed, electrons involved in EMPs like phenomenon interact strongly with antidots when electron cyclotron orbits are larger than or comparable to the antidot diameter.

36 MATERIALS SCIENCE↗

Tevatron combination of single-top-quark cross sections and determination of the magnitude of the Cabibbo-Kobayashi-Maskawa matrix element $\bf V_{tb}$

In this study, we present the final combination of CDF and D0 measurements of cross sections for single-top-quark production in proton-antiproton collisions at a center-of-mass energy of 1.96 TeV. The data correspond to total integrated luminosities of up to 9.7 fb -1 per experiment. The t-channel cross section is measured to be σ t = 2.25$+0.29\atop{-0.31}$ pb. We also present the combinations of the two-dimensional measurements of the s- vs t-channel cross section. In addition, we give the combination of the s+t channel cross section measurement resulting in σ s+t = 3.30$+0.52\atop{-0.40}$ pb, without assuming the standard model value for the ratio σ s /σ t . The resulting value of the magnitude of the top-to-bottom quark coupling is |V tb |= 1.02$+0.06\atop{-0.05}$, corresponding to |V tb | > 0.92 at the 95% C.L.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Simultaneous measurement of forward-backward asymmetry and top polarization in dilepton final states from $t\bar t$ production at the Tevatron

We present a simultaneous measurement of the forward-backward asymmetry and the top-quark polarization in tt¯ production in dilepton final states using 9.7 fb –1 of proton-antiproton collisions at √s=1.96 TeV with the D0 detector. To reconstruct the distributions of kinematic observables we employ a matrix element technique that calculates the likelihood of the possible tt¯ kinematic configurations. After accounting for the presence of background events and for calibration effects, we obtain a forward-backward asymmetry of A tt¯ =(15.0±6.4(stat)±4.9(syst))% and a top-quark polarization times spin analyzing power in the beam basis of κP=(7.2±10.5(stat)±4.2(syst))%, with a correlation of –56% between the measurements. If we constrain the forward-backward asymmetry to its expected standard model value, we obtain a measurement of the top polarization of κP=(11.3±9.1(stat)±1.9(syst))%. If we constrain the top polarization to its expected standard model value, we measure a forward-backward asymmetry of A tt¯ =(17.5±5.6(stat)±3.1(syst))%. A combination with the D0 A tt¯ measurement in the lepton+jets final state yields an asymmetry of Att¯=(11.8±2.5(stat)±1.3(syst))%. Within their respective uncertainties, all these results are consistent with the standard model expectations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the Effective Weak Mixing Angle in p p ¯ → Z / γ * → e + e - Events

We present a measurement of the fundamental parameter of the standard model, the weak mixing angle sin 2 θ ℓ eff which determines the relative strength of weak and electromagnetic interactions, in pp¯→Z/γ*→e + e - events at a center of mass energy of 1.96 TeV, using data corresponding to 9.7 fb -1 of integrated luminosity collected by the D0 detector at the Fermilab Tevatron. The effective weak mixing angle is extracted from the forward-backward charge asymmetry as a function of the invariant mass around the Z boson pole. The measured value of sin 2 θ ℓ eff =0.23147±0.00047 is the most precise measurement from light quark interactions to date, with a precision close to the best LEP and SLD results.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

TU-CD-BRD-03: UCSD Experience, with Focus On Implementing Change

It has long been standard practice in radiation oncology to report internally when a patient’s treatment has not gone as planned and to report events to regulatory agencies when legally required. Most potential errors are caught early and never affect the patient. Quality assurance steps routinely prevent errors from reaching the patient, and these “near misses” are much more frequent than treatment errors. A growing number of radiation oncology facilities have implemented incident learning systems to report and analyze both errors and near misses. Using the term “incident learning” instead of “event reporting” emphasizes the need to use these experiences to change the practice and make future errors less likely and promote an educational, non-punitive environment. There are challenges in making such a system practical and effective. Speakers from institutions of different sizes and practice environments will share their experiences on how to make such a system work and what benefits their clinics have accrued. Questions that will be addressed include: How to create a system that is easy for front line staff to access How to motivate staff to report How to promote the system as positive and educational and not punitive or demeaning How to organize the team for reviewing and responding to reports How to prioritize which reports to discuss in depth How not to dismiss the rest How to identify underlying causes How to design corrective actions and implement change How to develop useful statistics and analysis tools How to coordinate a departmental system with a larger risk management system How to do this without a dedicated quality manager Some speakers’ experience is with in-house systems and some will share experience with the AAPM/ASTRO national Radiation Oncology Incident Learning System (RO-ILS). Reports intended to be of value nationally need to be comprehensible to outsiders; examples of useful reports will be shown. There will be ample time set aside for audience members to contribute to the discussion. Learning Objectives: Learn how to promote the use of an incident learning system in a clinic. Learn how to convert “event reporting” into “incident learning”. See examples of practice changes that have come out of learning systems. Learn how the RO-ILS system can be used as a primary internal learning system. Learn how to create succinct, meaningful reports useful to outside readers. Gary Ezzell chairs the AAPM committee overseeing RO-ILS and has received an honorarium from ASTRO for working on the committee reviewing RO-ILS reports. Derek Brown is a director of http://TreatSafely.org . Brett Miller has previously received travel expenses and an honorarium from Varian. Phillip Beron has nothing to report.

60 APPLIED LIFE SCIENCES↗

Nuclear Data Needs and Capabilities for Applications

In July 2014, DOE NP carried out a review of the US Nuclear Data Program. This led to several recommendations, including that the USNDP should “devise effective and transparent mechanisms to solicit input and feedback from all stakeholders on nuclear data needs and priorities.” The review also recommended that USNDP pursue experimental activities of relevance to nuclear data; the revised 2014 Mission Statement accordingly states that the USNDP uses “targeted experimental studies” to address gaps in nuclear data. In support of these recommendations, DOE NP requested that USNDP personnel organize a Workshop on Nuclear Data Needs and Capabilities for Applications (NDNCA). This Workshop was held at Lawrence Berkeley National Laboratory (LBNL) on 27-29 May 2015. The goal of the NDNCA Workshop was to compile nuclear data needs across a wide spectrum of applied nuclear science, and to provide a summary of associated capabilities (accelerators, reactors, spectrometers, etc.) available for the required measurements. The first two days of the workshop consisted of 25 plenary talks by speakers from 16 different institutions, on nuclear energy (NE), national security (NS), isotope production (IP), and industrial applications (IA). There were also shorter “capabilities” talks that described the experimental facilities and instrumentation available for the measurement of nuclear data. This was followed by a third day of topic-specific “breakout” sessions and a final closeout session. The agenda and copies of these talks are available online at http://bang.berkeley.edu/events/NDNCA/agenda. The importance of nuclear data to both basic and applied nuclear science was reflected in the fact that while the impetus for the workshop arose from the 2014 USNDP review, joint sponsorship for the workshop was provided by the Nuclear Science and Security Consortium, a UC-Berkeley based organization funded by the National Nuclear Security Administration (NNSA).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗