Engineering topics
Brown, Alexander
Publications and source records attributed to Brown, Alexander.
Rubble Fire Multi-Phase Model Development
This report presents multi-phase modeling approaches that are developed for simulating rubble fire scenarios similar to a large-scale rubble pool fire test at Sandia National Laboratories using composite materials and jet fuel. The rubble pool fire test burnt oddly shaped combustible solid objects submerged in liquid fuel. As an intermediate step toward a full scale rubble fire simulation, various model improvement tasks were performed. For modeling solid decomposition, a multi-step degradation model was used for canonical verification problems and the Chemical Percolation for Devolatilization (CPD) approach was implemented. Capabilities of Lagrangian particle approach has been extended such that a group of particles may represent a solid bulk. For gas-liquid interface, the volume of fluid (VOF) technique was implemented and relevant physics were added. The developed tools offer a potential for simulating three-phase (gas, liquid, and solid) combustion applications.
The MUSCLES Treasury Survey. IV. Scaling Relations for Ultraviolet, Ca ii K, and Energetic Particle Fluxes from M Dwarfs
Characterizing the UV spectral energy distribution (SED) of an exoplanet host star is critically important for assessing its planet’s potential habitability, particularly for M dwarfs, as they are prime targets for current and near-term exoplanet characterization efforts and atmospheric models predict that their UV radiation can produce photochemistry on habitable zone planets different from that on Earth. To derive ground-based proxies for UV emission for use when Hubble Space Telescope ( HST ) observations are unavailable, we have assembled a sample of 15 early to mid-M dwarfs observed by HST and compared their nonsimultaneous UV and optical spectra. We find that the equivalent width of the chromospheric Ca ii K line at 3933 Å, when corrected for spectral type, can be used to estimate the stellar surface flux in ultraviolet emission lines, including H i Ly α . In addition, we address another potential driver of habitability: energetic particle fluxes associated with flares. We present a new technique for estimating soft X-ray and >10 MeV proton flux during far-UV emission line flares (Si iv and He ii) by assuming solar-like energy partitions. We analyze several flares from the M4 dwarf GJ 876 observed with HST and Chandra as part of the MUSCLES Treasury Survey and find that habitable zone planets orbiting GJ 876 are impacted by large Carrington-like flares with peak soft X-ray fluxes ≥10{sup −3} W m{sup −2} and possible proton fluxes ∼10{sup 2}–10{sup 3} pfu, approximately four orders of magnitude more frequently than modern-day Earth.
Modeling Aerodynamic Break-up of Liquid Drops in a Gas Flow with Molecular Dynamics Analogy Methods.
Abstract not provided.
Mass-Loss Measurements on Solid Materials after Pulsed Radiant Heating at High Heat Flux.
Abstract not provided.
Numerical study of pyrolysis and combustion of a carbon fiber-epoxy composite.
Abstract not provided.
Multicomponent Evaporation Effects on Particulate Release in a Liquid Fuel Fire.
Abstract not provided.
Evaluating a Historical Airborne Release Test with Modern Modeling Methods.
Abstract not provided.
Mass-Loss Measurements on Solid Materials after Pulsed Radiant Heating at High Heat Flux.
Abstract not provided.
Numerical study of pyrolysis and combustion of a carbon fiber-epoxy composite.
Abstract not provided.
NSRD-11: Computational Capability to Substantiate DOE-HDBK-3010 Data.
Safety basis analysts throughout the U.S. Department of Energy (DOE) complex rely heavily on the information provided in the DOE Handbook, DOE - HDBK - 3010, Airborne Release Fractions/Rates and Respirable Fractions for Nonreactor Nuclear Facilities, to determine radionuclide source terms. In calculating source terms, analysts tend to use the DOE Handbook's bounding values on airborne release fractions (ARFs) and respirable fractions (RFs) for various categories of insults (representing potential accident release categories). This is typically due to both time constraints and the avoidance of regulatory critique. Unfortunately, these bounding ARFs/RFs represent extremely conservative values. Moreover, they were derived from very limited small-scale bench/laboratory experiments and/or from engineered judgment. Thus, the basis for the data may not be representative of the actual unique accident conditions and configurations being evaluated. The goal of this research is to develop a more accurate and defensible method to determine bounding values for the DOE Handbook using state-of-art multi-physics-based computer codes. This enables us to better understand the fundamental physics and phenomena associated with the types of accidents in the handbook. In this year, this research included improvements of the high-fidelity codes to model particle resuspension and multi-component evaporation for fire scenarios. We also began to model ceramic fragmentation experiments, and to reanalyze the liquid fire and powder release experiments that were done last year. The results show that the added physics better describes the fragmentation phenomena. Thus, this work provides a low-cost method to establish physics-justified safety bounds by taking into account specific geometries and conditions that may not have been previously measured and/or are too costly to perform.
Particle Resuspension Simulation Capability to Substantiate DOE-HDBK-3010 Data.
Abstract not provided.
CONTAMINATED FUEL FIRES: PARAMETRIC SENSITIVITY OF RESUSPENSION AND BOILING PARTICLE EVOLUTION.
Abstract not provided.
Diagnostics and Testing to Assess the Behavior of Organic Materials at High Heat Flux.
Abstract not provided.
Modeling Aerodynamic Break-up of Liquid Drops in a Gas Flow with Molecular Dynamics Analogy Methods.
Abstract not provided.