Engineering Papers⌕ Search

Engineering topics

Brower, D L

Publications and source records attributed to Brower, D L.

Classical confinement and outward convection of impurity ions in the MST RFP

Impurity ion dynamics measured with simultaneously high spatial and temporal resolution reveal classical ion transport in the reversed-field pinch. The boron, carbon, oxygen, and aluminum impurity ion density profiles are obtained in the Madison Symmetric Torus [R. N. Dexter et al., Fusion Technol. 19, 131 (1991)] using a fast, active charge-exchange-recombination-spectroscopy diagnostic. Measurements are made during improved-confinement plasmas obtained using inductive control of tearing instability to mitigate stochastic transport. At the onset of the transition to improved confinement, the impurity ion density profile becomes hollow, with a slow decay in the core region concurrent with an increase in the outer region, implying an outward convection of impurities. Impurity transport from Coulomb collisions in the reversed-field pinch is classical for all collisionality regimes, and analysis shows that the observed hollow profile and outward convection can be explained by the classical temperature screening mechanism. The profile agrees well with classical expectations. Experiments performed with impurity pellet injection provide further evidence for classical impurity ion confinement.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Far-forward collective scattering measurements of density fluctuations in the helically symmetric experiment stellarator

The multichannel interferometer system on the helically symmetric experiment (HSX) stellarator is reconfigured to perform far-forward collective scattering measurements of electron density fluctuations. The collective scattering system has nine viewing chords with 1.5 cm spacing. Scattered power is measured using a homodyne detection scheme. Far-forward collective scattering provides a line-integrated measurement of fluctuations within the divergence of the probe beam covering wavenumber range: k{sub perpendicular}<2 cm{sup -1}. The perpendicular wavenumber consists of poloidal and radial contributions that vary with chord position. Both coherent modes and broadband fluctuation are measured. When HSX is operated without quasihelical symmetry at B{sub T}=1 T and n{sub e}{approx}4x10{sup 12} cm{sup -3}, a coherent electrostatic fluctuation is observed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Differential interferometry for measurement of density fluctuations and fluctuation-induced transport (invited)

Differential interferometry employs two parallel laser beams with a small spatial offset (less than beam width) and frequency difference (1-2 MHz) using common optics and a single mixer for a heterodyne detection. The differential approach allows measurement of the electron density gradient, its fluctuations, as well as the equilibrium density distribution. This novel interferometry technique is immune to fringe skip errors and is particularly useful in harsh plasma environments. Accurate calibration of the beam spatial offset, accomplished by use of a rotating dielectric wedge, is required to enable broad application of this approach. Differential interferometry has been successfully used on the Madison Symmetric Torus reversed-field pinch plasma to directly measure fluctuation-induced transport along with equilibrium density profile evolution during pellet injection. In addition, by combining differential and conventional interferometry, both linear and nonlinear terms of the electron density fluctuation energy equation can be determined, thereby allowing quantitative investigation of the origin of the density fluctuations. The concept, calibration, and application of differential interferometry are presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Preliminary results from the Alcator C-Mod polarimeter

A poloidally viewing far infrared polarimeter diagnostic is being developed for the Alcator C-Mod tokamak, and will be used to determine the q-profile and to study density and magnetic field fluctuations. A three-chord version of what will eventually be up to a ten-chord system has been designed and fabricated and will be installed on C-Mod before the end of the current run period. Bench tests of a single chord mock-up of this system show acceptable noise levels for the planned measurements. We will discuss the analysis and experimental techniques used to diagnose and reduce noise sources.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Upgrade of far-infrared laser-based Faraday rotation measurement on MST

Recently, the far-infrared (FIR) laser ({lambda}{sub 0}=432 {mu}m) Faraday rotation measurement system on MST has been upgraded. The dc flowing-gas discharge CO{sub 2} pump laser is replaced by a rf-excited, sealed CO{sub 2} laser at 9.27 {mu}m (GEM select 100, Coherent Inc., Santa Clara, CA), which is subdivided equally into three parts to simultaneously pump three FIR cavities. The total infrared pump power is approximately 80 W on the 9R(20) line required to pump the formic acid molecule. Each FIR cavity produces {approx}12 mW, sufficient for 11 simultaneous chord interferometry-polarimetry operations. Three key issues [(1) conservation of circularly polarized wave, (2) colinearity of two probe waves, and (3) stability of intermediate frequencies between lasers] affecting the Faraday rotation measurement have been resolved experimentally.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Equilibrium evolution in oscillating-field current-drive experiments

Oscillating-field current drive (OFCD) is a proposed method of steady-state toroidal plasma sustainment in which ac poloidal and toroidal loop voltages are applied to produce a dc plasma current. OFCD is added to standard, inductively sustained reversed-field pinch plasmas in the Madison Symmetric Torus [R. N. Dexter et al., Fusion Technol. 19, 131 (1991)]. Equilibrium profiles and fluctuations during a single cycle are measured and analyzed for different relative phases between the two OFCD voltages and for OFCD off. For OFCD phases leading to the most added plasma current, the measured energy confinement is slightly better than that for OFCD off. By contrast, the phase of the maximum OFCD helicity-injection rate also has the maximum decay rate, which is ascribed to transport losses during discrete magnetic-fluctuation events induced by OFCD. Resistive-magnetohydrodynamic simulations of the experiments reproduce the observed phase dependence of the added current.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Magnetic-Fluctuation-Induced Particle Transport and Density Relaxation in a High-Temperature Plasma

The first direct measurement of magnetic-fluctuation-induced particle flux in the core of a high-temperature plasma is reported. Transport occurs due to magnetic field fluctuations associated with global tearing instabilities. The electron particle flux, resulting from the correlated product of electron density and radial magnetic fluctuations, accounts for density profile relaxation during a magnetic reconnection event. The measured particle transport is much larger than that expected for ambipolar particle diffusion in a stochastic magnetic field.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measurements of the momentum and current transport from tearing instability in the Madison Symmetric Torus reversed-field pinch

In this paper measurements of momentum and current transport caused by current driven tearing instability are reported. The measurements are done in the Madison Symmetric Torus reversed-field pinch [R. N. Dexter, D. W. Kerst, T. W. Lovell, S. C. Prager, and J. C. Sprott, Fusion Technol. 19, 131 (1991)] in a regime with repetitive bursts of tearing instability causing magnetic field reconnection. It is established that the plasma parallel momentum profile flattens during these reconnection events: The flow decreases in the core and increases at the edge. The momentum relaxation phenomenon is similar in nature to the well established relaxation of the parallel electrical current and could be a general feature of self-organized systems. The measured fluctuation-induced Maxwell and Reynolds stresses, which govern the dynamics of plasma flow, are large and almost balance each other such that their difference is approximately equal to the rate of change of plasma momentum. The Hall dynamo, which is directly related to the Maxwell stress, drives the parallel current profile relaxation at resonant surfaces at the reconnection events. These results qualitatively agree with analytical calculations and numerical simulations. It is plausible that current-driven instabilities can be responsible for momentum transport in other laboratory and astrophysical plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Stochastic magnetic field driven charge transport and zonal flow during magnetic reconnection

Magnetic fluctuation-induced charge transport, resulting from particle transport that is not intrinsically ambipolar, has been measured in the high-temperature interior of a reversed-field pinch plasma. It is found that global resistive tearing modes and their nonlinear interactions lead to significant charge transport, equivalent to the perpendicular Maxwell stress, in the vicinity of the resonant surface for the dominant core resonant mode during magnetic reconnection. Finite charge transport can result in a zonal flow associated with locally strong radial electric field and electric field shear. In the presence of stochastic magnetic field, radial electric field is expected to be balanced by radial electron pressure gradient. Direct measurement of local density gradient is consistent with the formation of radial electric field and the zonal flow.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Advanced Interferometry Techniques for Burning Plasmas

For future burning plasma experiments, all diagnostics must be re-evaluated in terms of their measurement capabilities and robustness to the new environment. This is certainly true for interferometry measurements where conventional approaches may not be ideal and interpretation may require modification due to high plasma temperatures. Optimizing these systems to provide maximum information will be crucial to understanding burning plasma dynamics. This paper will explore a variety of phase measurement techniques for the main body and divertor regions that can be utilized on burning plasma experiments like ITER and beyond.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High-{beta}, improved confinement reversed-field pinch plasmas at high density

In Madison Symmetric Torus [Dexter et al., Fusion Technol. 19, 131 (1991)] discharges where improved confinement is brought about by modification of the current profile, pellet injection has quadrupled the density, reaching n{sub e}=4x10{sup 19} m{sup -3}. Without pellet injection, the achievable density in improved confinement discharges had been limited by edge-resonant tearing instability. With pellet injection, the total beta has been increased to 26%, and the energy confinement time is comparable to that at low density. Pressure-driven local interchange and global tearing are predicted to be linearly unstable. Interchange has not yet been observed experimentally, but there is possible evidence of pressure-driven tearing, an instability usually driven by the current gradient in the reversed-field pinch.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗