Engineering topics
Brophy, John
Publications and source records attributed to Brophy, John.
A Breakthrough Propulsion Architecture for Interstellar Precursor Missions: Phase I Final Report
Our breakthrough propulsion architecture is an innovative way to take advantage of kilometer-scale, multi-hundred megawatt, space-based, phased-array lasers to enable rapid transportation throughout the solar system. In this architecture, the laser would beam power over distances of up to 40 AU increasing the available power density relative to solar insolation by two orders of magnitude. The receiving vehicle would have a photovoltaic array with cells tuned to the laser frequency that outputs a voltage of 6 kV to directly-drive a lithium-fueled gridded ion thruster system at an ultra-high specific impulse of 40,000 s. Such a system could enable final spacecraft speeds of greater than 40 AU/year, potentially enabling missions to the solar gravity lens focus at 550 AU in less than 15 years. This is the propulsion architecture of the 22nd century.
A Science-Driven Mission Concept to An Exoplanet
A concept for a science-driven robotic mission to an exoplanet was developed by a team of scientists and engineers from NASA and academia. The concept and scope were based on key mission and science requirements designed to address the question: “What makes a flight mission to an exoplanet compelling, in terms of science return, compared to what we will be able to learn in the next few decades with large near-Earth telescopes or other remote sensing techniques such as a telescope at the Solar Gravity Lens Focus?” By thinking systematically through mission and science goals and objectives, key requirements were developed that would drive technology developments in all necessary aspects, not just on propulsion. Unique science measurements would be performed en route to the exoplanet, including exploring the environment in the outer regions of our solar system, the Oort Cloud, the local interstellar medium, and the astrospheric environment around the host star. One of the key mission science objectives, and one that addresses why a mission to an exoplanet is compelling, was to confirm and characterize life. This objective is fundamental and drives the need for a precursor exoplanet characterization program to search for Earth-centric biosignatures and also drives key aspects of the mission concept. The team concluded that a direct confirmation of life would require in situ observations and measurements which cannot be performed on a fast (~10% of the speed of light) flyby; thus, the mission would require a method to slow down, orbit, or send a probe to the exoplanet’s surface. This capability drives a trade between interstellar travel velocity, trip duration, and propulsion architecture, as well as a high level of onboard autonomy, including adaptive science data collection, on-board data processing, and analysis. This paper describes our mission concept, the key requirements, and open trades.
A breakthrough propulsion architecture for interstellar precursor missions concepts
UNKNOWN
Characteristics of a high-power ion beam deflection system necessary to deflect the hypothetical asteroid 2017 PD
The July 2027 impact date for the hypothetical asteroid 2017 PDC, that is the subject of an emergency response exercise, leaves just over ten years to implement a deflection approach. The analyses herein allocates four years to the design, fabrication, assembly, test and launch of a notional high-power Ion Beam Deflection (IBD) vehicle to meet a launch readiness date no later than May 2021. Using this launch date along with estimates for the vehicle mass and performance characteristics of the electric propulsion system, low-thrust trajectory analyses indicate a 2.56-year flight time to rendezvous with 2017 PDC. This would leave 3.6 years to execute the actual deflection phase. A 160-kW IBD vehicle could deflect 2017 PDC by at least one Earth radius within this time provided the asteroid’s actual diameter was less than about 140 m and its density was 2 g/cm3 or less. Larger diameters and/or higher densities would require a higher power IBD vehicle, multiple IBD vehicles, or a longer deflection phase. Ion beam deflection is largely independent of the characteristics of the threat object, but its effectiveness, like all deflection approaches, is sensitive to both the asteroid mass and the time available for deflection. The characteristics of IBD, i.e., large standoff distance between the spacecraft and the asteroid surface, as well as ion beam divergence angles of a few degrees, facilitates the possible simultaneous use of multiple IBD vehicles to improve the performance and robustness of the asteroid deflection. The 65-cm diameter, 20-kW NEXIS ion thruster developed in support of the Jupiter Icy Moons Orbiter mission concept is particularly well suited for application to a high-power IBD system. It has demonstrated an ion beam divergence angle of approximately 2 degrees and operation at 20 kW for over 2,000 hours. Completion of the development and flight qualification of this technology would significantly reduce the risk and time necessary to respond to the discovery of potentially hazardous asteroid in the size range of 50- to 100-m diameter.
Advanced Solar Electric Propulsion for Planetary Defense
Once the current survey to identify all near-Earth objects larger than 140-m diameter is complete, the major hazard from asteroid impacts may be from asteroids in the 50- to 100-m diameter size range. High-power solar electric propulsion systems employed in “slow-push” techniques may be the best way to deflect asteroids in this size range if deflection is warranted. The relative performance of three slow-push techniques—gravity tractor (GT), enhanced gravity tractor (EGT), and ion beam deflection (IBD)—are compared, assuming solar electric propulsion vehicles derived from NASA’s Asteroid Redirect Robotic Mission concept vehicle. Both the enhanced gravity tractor and ion beam deflection concepts are shown to be significantly better than the standard gravity tractor concept. The Hall-thruster based enhanced gravity tractor systems and ion beam deflection systems (based on the use of high-power gridded ion thrusters) are shown to provide comparable performance, i.e., similar deflection times and propellant required. Enhanced gravity tractor systems require the acquisition of material from the surface of the hazardous object in order to achieve the required “enhancement” of the gravitational coupling force. This makes EGT systems sensitive to the rotational state and surface properties of the unknown object, and potentially severely limits its applicability. Ion beam deflection is completely independent of the characteristics of the threat object. In fact, it is the only asteroid deflection technique, slow-push or otherwise, that can make this claim, thus potentially greatly increasing its applicability relative to other deflection techniques. Finally, high-power IBD systems are shown to be capable of deflecting the fictitious asteroid 2015 PDC used in the hypothetical asteroid impact exercise conducted at the 2015 Planetary Defense Conference.
Ion Beam Deflection (AKA Push-Me/Pull-You)
The Ion Beam Deflection provides the following potential advantages over other asteroid deflection systems. Like the gravity tractor, it doesn't require despinning of the asteroid. Unlike the gravity tractor, it provides a significantly higher coupling force that is independent of the asteroid size. The concept could be tested as part of the baseline Asteroid Redirect Robotic Mission. The thrust and total impulse are entirely within the design of the SEP vehicle. The total impulse is potentially competitive with kinetic impactors and eliminates the need for a second rendezvous spacecraft.Gridded ion thrusters provide beam divergence angles of a few degrees enabling long stand-off distances from the asteroid. Mitigating control issues. Minimizing back-sputter contamination risks
Asteroid Redirect Mission Reference Configuration plus Alternatives from the KISS Study
No abstract available
Project 5S: A Safe Stepping Stone into the Solar System
The human exploration program, at least in NASA, has been directed to move beyond the Moon and travel on a flexible path into the solar system. Reaching a Near-Earth Asteroid (NEA) is a major human space flight goal but such missions have tight times and life-support requirements that require huge steps from current capabilities. An objective between the Moon and a NEA is needed. Example interim objectives are the Lagrangian points in either the Sun-Earth or Earth-Moon (EM) system. The nearest of these points beyond the Moon is E-M L2. The Lagrangian points are empty (as far as we know). As objectives for human flight,it has been argued that they suffer from a lack of public interest and of meaningful objectives for astronaut operations. To provide a physical target, a robotic spacecraft could retrieve a small NEA and bring it to a Lagrangian or other nearer-Earth point to be accessed and utilized for human-mission objectives. This paper reports on the results of a recently completed study of an asteroid retrieval mission sponsored by the Keck Institute for Space Studies (KISS) at the California Institute of Technology. The study included an evaluation of potential targets, mission objectives, mission and system design, and potential capture mechanisms. The study concluded that, while challenging, there are no fundamental show stoppers and that such a mission would be possible with technology expected to be available in this decade. The final destination selected (for safety and mission operations) was high lunar orbit. Two options for target selection are considered: (i) retrieving a small (7 meter) NEA with a mass of order 500,000 kg, and (ii) taking a similar size boulder of a large known carbonaceous NEA. Several areas of technology and program requirements were identified, but the most important conclusion was that this approach enables meeting a goal of humans going to a NEA by the mid-2020s. The advantages and benefits for human exploration are considerable as are the advances that would be made in space-resource utilization and science for further exploration and development of the solar system. The combination of the robotic mission to move the asteroid and the human mission to go to its new destination and conduct astronaut operations there would provide a boost and purpose to human space flight.
Solar Electric Propulsion (SEP) for Human Space Exploration
No abstract available
Advanced Propulsion for Small Body Missions
Presentation discusses: 1. Flight applications to date 2. Future driving requirements and associated mission applications and capabilities provided by this technology 3. Specific mission examples of the application of near-term and longer-term propulsion options
Sensitivity Testing of the NSTAR Ion Thruster
During the Extended Life Test of the DS1 flight spare ion thruster, the engine was subjected to sensitvity testing in order to characterize the macroscopic dependence of discharge chamber sensitivity to a +\-3% vatiation in main flow, cathode flow and beam current, and to +\5% variation in beam and accelerator voltage, was determined for the minimum- (THO), half- (TH8) and full power (TH15) throttle levels. For each power level investigared, 16 high/low operating conditions were chosen to vary the flows, beam current, and grid voltages in in a matrix that mapped out the entire parameter space. The matrix of data generated was used to determine the partial derivative or senitivity of the dependent parameters--discharge voltage, discharge current, discharge loss, double-to-single-ion current ratio, and neutralizer-keeper voltage--to the variation in the independent parameters--main flow, cathode flow, beam current, and beam voltage. The sensititivities of each dependent parameter with respect to each independent parameter were determined using a least-square fit routine. Variation in these sensitivities with thruster runtime was recorded over the duration of the ELT, to detemine if discharge performance changed with thruster wear. Several key findings have been ascertained from the sensitivity testing. Discharge operation is most sensitve to changes in cathode flow and to a lesser degree main flow. The data also confirms that for the NSTAR configuration plasma production is limited by primary electron input due to the fixed neutral population. Key sensitivities along with their change with thruster wear (operating time) will be presented. In addition double ion content measurements with an ExB probe will also be presented to illustrate beam ion production and content sensitivity to the discharge chamber operating parameteres.
Comparison of NASA's 30-cm Ion Thruster Capabilities with the Dawn Mission Requirements
The Dawn ion thrusters meet all of the performance and life requirements for the Dawn mission. FT001 has two magnets in sideways in the middle magnet ring, but this has only a minor impact on the thruster performance. Electron-backstreaming is the first wear-out failure mechanism for the Dawn ion thrusters - PFA Modeling Indicates: a) The mission cannot be completed with a single thruster; b) The probability for mission success based on accelerator grid wear is > 99% for the worst case thruster usage for nominal thruster beamlet profiles; and c) FT002 has the most peaked beam profile which impacts the thruster s throughput capability. PFA results indicate that this reduces the probability for mission success based on accelerator grid wear to 97% based on the worst case thruster usage. The wear-out probability is zero if all three thrusters are used during the mission.