Engineering Papers⌕ Search

Engineering topics

Briggs, L. W.

Publications and source records attributed to Briggs, L. W..

Solar drum positioner mechanisms

The need for additional power on spinning satellites required development of deployable solar arrays activated, as on a 3-axis vehicle, after separation from a booster or shuttle orbiter. Mechanisms were developed for telescopically extending a secondary 36.3 kg (80 lb.), 2.13 m (84 in.) diameter spinning solar drum for a distance of 2.0 m (80 in.) or more along the spin axis. After extension, the system has the capability of dynamically controlling the drum tilt angle about the spin axis to provide precision in-orbit balancing of the spacecraft. This approach was selected for the SBS, ANIK C, ANIK D, WESTAR B and PALAPA B satellites. It was successfully demonstrated during the in orbit deployment of the aft solar panels of the SBS F-3 and F-1 satellites, subsequent to the November 1980 and September 1981 launches.

Briggs, L. W.↗

Reliability breakthrough: An antenna deployment/positioning mechanism with electrical and mechanical redundancy

An Antenna Positioner Mechanism (APM) was developed for deployment of an antenna reflector and for fine granularity closed loop tracking of the antenna in response to RF beacon error signals. By utilizing permanent magnet stepper motors, spur gearheads, irreversible single threat worm/wheel assemblies and a miter gear differential, full electrical and mechanical redundancy was realized. Two versions of this design were generated: one is a weight-optimized design with a clutch for overload protection and one is a more rugged unit without a clutch.

Olson, M. C.↗