Engineering Papers⌕ Search

Engineering topics

Brett A. Bednarcyk

Publications and source records attributed to Brett A. Bednarcyk.

14 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2024

Out of Plane Stresses Using a Beam-Based Elastic Foundation Bonded Joint Model

Efficient, semi-analytical models of bonded joints are utilized for initial joint design and sizing due to their convenience and speed. Many of these models are based on beam and plate theories, which are most applicable when in-plane stresses/strains dominate. While this can be a sensible assumption for obtaining the deformations of the joint, out of plane (transverse) stresses are often of critical importance for failure in bonded joints composed of fiber reinforced composite materials. Since through-thickness strains are neglected in these semi-analytical theories, the present study shows a method to back-calculate the out of plane stresses based on stress balance equations, which use the in-plane stresses and displacements that have already been obtained. The method was implemented within the Joint Element Designer (JED) software, and verification and validation examples have been shown. As is typical for these types of models, corner stress singularities are not captured by the JED model, but the general trends of the stress and deformation fields agreed with a higher fidelity finite element model. As such, this method for obtaining out of plane stresses, when coupled with the JED code, is very useful for the complete stress analysis of bonded composite joints.

composites↗
NASA NTRS2022

Multiscale Progressive Failure Analysis of 3D Woven Composites

Application of three-dimensional (3D) woven composites is growing as an alternative to the use of ply-based composite materials. However, the design, analysis, modeling, and optimization of these materials is more challenging due to their complex and inherently multiscale geometries. Herein, a multiscale modeling procedure, based on efficient, semi-analytical micromechanical theories rather than the traditional finite element approach, is presented and applied to a 3D woven carbon–epoxy composite. A crack-band progressive damage model was employed for the matrix constituent to capture the globally observed nonlinear response. Realistic microstructural dimensions and tow-fiber volume fractions were determined from detailed X-ray computed tomography (CT) and scanning electron microscopy data. Pre-existing binder-tow disbonds and weft-tow waviness, observed in X-ray CT scans of the composite, were also included in the model. The results were compared with experimental data for the in-plane tensile and shear behavior of the composite. The tensile predictions exhibited good correlations with the test data. While the model was able to capture the less brittle nature of the in-plane shear response, quantitative measures were underpredicted to some degree.

3D woven composites↗
NASA NTRS2018

Relevence of 3D Simulations and Sandwich Core Topology for the Modeling of Honeycomb Core Sandwich Panels Undergoing Mode I Delamination

A recently developed cohesive zone traction-separation law, which includes the effects of fiber bridging in a novel way, is extended from 2D to 3D. The proposed cohesive model is applied to low fidelity (i.e. homogenized core representation) and high fidelity (i.e. directly accounting for the core topology) finite element models of a composite panel comprised of carbon fiber reinforced plastic facesheets and a honeycomb sandwich core. This enables the investigation of 2D to 3D parameter transferability, width-dependent effects such as thumbnail-shaped crack growth, and the verification of plane strain / plane stress assumptions. A pronounced curvature of the initial interface-related crack front is observed, while the bridging-related crack front is straight. Furthermore, it is found that the cohesive parameters can easily be transferred from 2D to 3D under plane stress assumptions, but not under plane strain assumptions. The numerical predictions are compared to experimental load-displacement and R-curves.

Composites↗
NASA NTRSDate not supplied

Application of the NASA Multiscale Analysis Tool: Multiscale Integration and Interoperability

In order to demonstrate NASMAT’s multiscale operability, a series of illustrative examples will be presented that focus on the application of NASMAT to practical problems. First, the multiscale integration and data recursion is demonstrated by performing a multiscale analysis using only built-in micromechanics methods. NASMAT’s integration is then highlighted by running a multiscale analysis where an external finite element software calls NASMAT. In this case, at each integration point within the finite element model, a local NASMAT analysis is performed to account for failure behavior at the constituent scale. In a similar example, an external program is called from within NASMAT. This case would be relevant for a user wanting to implement an outside micromechanics technique. A combination of these examples is then presented to further illustrate the code’s flexibility when interfacing with outside codes in a multiscale framework. For all examples, data is presented using a custom-developed visualization tool. Additional potential use cases are also addressed. Finally, the plan for upcoming features and added capabilities is discussed.

NASMAT↗
NASA NTRSDate not supplied

Application of the NASA Multiscale Analysis Tool: Multiscale Integration and Interoperability

The NASA Multiscale Analysis Tool (NASMAT) was developed recently to allow a wide variety of multiscale analysis problems to be effectively and efficiently solved. The architecture of NASMAT was established specifically to enable parallelized, “plug-and-play” functionality to reduce the complexity associated with adding new features to the code in the future and to allow end users to rapidly implement and evaluate user-defined capabilities. Additionally, the tool utilizes recursive data structures and subroutines to allow for an arbitrary number of length scales when performing multiscale analyses of heterogeneous materials. These features permit the rapid integration of user-defined capabilities (e.g., a material model, micromechanics approach, or failure theory) at all stages within a NASMAT calculation while leveraging built-in techniques where needed. Additionally, these features allow NASMAT to both be called from an external program as well as call an external program. This paper specifically focuses on the multiscale integration and interoperability of NASMAT with other analysis techniques through an illustrative, multiscale analysis of a 3D woven polymer matrix composite (PMC).

NASMAT↗
NASA NTRSDate not supplied

Thermal Conductivity of 3D Woven Composite Thermal Protection System Materials via Multiscale Recursive Micromechanics

Multiscale micromechanics predictions have been made for the effective thermal conductivities and local thermal fields for a novel 3D woven composite thermal protection system material. The Multiscale Recursive Micromechanics approach, which enables micromechanics models to call other micromechanics models (or themselves recursively) to consider finer and finer length scales, has been employed. The multiscale model uses a recently developed version of the High-Fidelity Generalized Method of Cells micromechanics theory at each of three length scales. Results focus on the impact of the microstructural geometry representation at each length scale on the material’s effective thermal conductivity, along with the local thermal flux and temperature fields induced in the microstructures.

Composites↗
NASA NTRSDate not supplied

Multiscale Thermal Conductivity Modeling of 3D Woven Composite Thermal Protection System Materials

Novel thermal protection systems (TPS) for re-entry and hypersonic vehicles utilize 3D woven composite materials with blended carbon filament tows (yarns) and a phenolic resin matrix. The presence of continuous carbon fibers provides superior stiffness and strength compared to legacy TPS, while the 3D weave pattern provides a great deal of design flexibility for both in-plane and through thickness thermomechanical behavior. However, modeling of 3D woven composites is notoriously complex and numerically intensive. The present investigation utilizes a unique ultra-efficient approach, known as Multiscale Recursive Micromechanics (MsRM), wherein recursive semi-analytical micromechanics methods are employed at various length scales within the composite. The MsRM approach has recently been extended to solve for the effective thermal conductivity as well as the local temperature and thermal flux fields throughout the composite. Presented model results focus on the impact of the microstructural geometry representation at each length scale on the material’s effective thermal conductivity, along with the local thermal flux and temperature fields induced in the microstructures, for a novel 3D woven TPS.

Composite↗
NASA NTRSDate not supplied

Estimation of 3D Woven Design Sensitivities Using a Rapid Multiscale Analysis Technique

Highly-refined finite element models of three-dimension (3D) woven composite systems currently require excessive computational demands that limit their use in sensitivity analysis, uncertainty quantification, and optimization. An alternative analysis methodology was developed using the NASA Multiscale Analysis Tool (NASMAT) where multiscale models of a 3D woven composite (including inter-tow matrix voids and constituent failure) can be completed on a single central processing unit(CPU)on the order of ~30 s. To develop inputs and validation data for the NASMAT model, coupon and acid-digesting testing and x-ray computed tomography were performed. The NASMAT inputs were parameterized using a set of 25 input variables and distributions. These inputs were randomly sampled to generate a total of 100,000 NASMAT analyses that could be used to understand the influence of different material and geometric properties on the warp and weft-direction stiffness and strength. These analyses (including pre/post-processing) were performed in less than eight hours on a 120 CPU cluster. The computational efficiency of the NASMAT model enabled a sensitivity analysis to be performed, and dominant input variables were able to be identified. Key results were consistent with theoretical and experimental observations for the specific 3D woven system studied in this work.

NASMAT↗
NASA NTRSDate not supplied

A Partitioned -Task Parallel Implementation of the NASA Multiscale Analysis Tool for High Performance Computing

The NASA Multiscale Analysis Tool (NASMAT) is a “plug and play” software package that allows users to conduct massively multiscale modeling of hierarchical and nonlinear materials. This work extends the scalability and improves the High Performance Computing friendliness of NASMAT by adopting a Partitioned Task-Parallel approach. Interoperability of NASMAT with external software is enhanced through preCICE, a open source library for multiphysics coupling in a partitioned manner. Enhancement through preCICE allows for easy integration of NASMAT to other macro solvers and dissociates the parallelization strategy adopted within NASMAT from the macro solver. The task-parallel framework based on Master-Worker approach is implemented as the parallelization scheme. The scheme accounts for hierarchy of multiple scales (task-dependence) and heterogeneous nature (dynamic load balancing) of computations. The applicability and scalability of the framework will be evaluated by analyzing large scale engineering problems through massively multiscale methods.

NASMAT↗
NASA NTRSDate not supplied

Multiscale Modeling of Thermoplastics Using Atomistic-informed Micromechanics

A multiscale model was developed for predicting the thermoelastic behavior of semi-crystalline thermoplastic materials for composite aerospace applications. At the highest scale containing the semi-crystalline spherulite in an amorphous matrix, the generalized method of cells, or high fidelity method of cells, was used to perform the homogenization calculations to obtain the effective properties. Models were developed assuming a cubic, or spherical shape, for the spherulite to understand if the morphology of the spherulite affects the effective thermoelastic properties. The generalized method of cells was used to model at the repeating unit cells at the subscales of the microstructure including the lamellae stacks and granular crystal blocks. The scales are integrated using the multiscale micromechanics method in the NASA Multiscale Analysis Tool. Data from molecular dynamics simulations were used as inputs for the amorphous and crystalline constituents. Convergence studies were performed to determine the best level of discretization for the repeating unit cell at the highest scale. Effective Young’s modulus, shear modulus, Poisson’s ratio, coefficient of thermal expansion, and thermal conductivity were predicted for polyether ether ketone and polyether ketone ketone, and very good agreement between the model utilizing the cubic spherulite and the experimental data, where available, was observed for polyether ketone ketone. Normalization of the data for the bulk polyether ketone ketone, against amorphous data, improved the predictions as compared to experimental data. Overall, the high fidelity method of cells predicted a stiffer response then the generalized method of cells as the crystallinity was increased. The shape of the spherulite had a minimal effect on the predicted bulk properties of the polymers.

thermoplastics↗
NASA NTRSDate not supplied

Comparison of Micromechanics Theories for Modeling Discontinuous Long Fiber Reinforced Composites

Two micromechanics theories, the high fidelity generalized method of cells and Carrera Unified Formulation, are used to model a repeating unit cell of a discrete long fiber composite. The models are used to predict the effective properties of a single fiber with varying fiber-to-fiber end gap lengths, as well as the local stresses in the fiber and matrix. Both models produced similar results and demonstrated that they could capture the complex local load transfer due to the shear lag effect.

discrete long fiber composites↗
NASA NTRSDate not supplied

The Nasa Multiscale Analysis Tool: an Enabling Platform for Achieving Vision 2040

Vision 2040 is a community-driven consensus document, written in 2018, aimed at defining the potential 25-year future state required for performing integrated multiscale modeling of materials and systems for future aerospace and aeronautical applications. Nine Vision Key Elements (KEs) were defined along with associated technical gaps. This paper will address current NASA GRC research efforts utilizing the NASA Multiscale Analysis Tool (NASMAT). This paper will specifically focus on NASMAT’s ability to address gaps in three of the nine Vision 2040 KEs: 1) Models and Methods, 2) Multiscale Measurements and Characterization Tools and Methods, and 6) Data, Informatics, and Visualization. NASMAT is a versatile platform for performing computationally efficient multiscale analyses of heterogeneous materials. NASMAT offers the user flexibility to define an arbitrary number of length scales (levels) where a variety of micromechanics theories can be implemented at each level. Micromechanics theories can be selected to balance accuracy and computational efficiency and range from analytical (Mori-Tanaka) to several semi-analytical (method of cells) formulations. NASMAT can also be coupled with external software and used to perform multiscale analyses of more complex structures. The paper will include a recent application of NASMAT to model a complex, three-dimensional woven composite, with a particular emphasis placed on multiscale measurements utilized to enhance the quality of the multiscale analysis. Since typical NASMAT analyses can be completed in on the order of seconds to minutes, a second example will demonstrate NASMAT’s ability to generate large quantities of data useful for sensitivity analysis, uncertainty quantification, or machine learning applications. Current progress on developing multiscale data visualization tools will also be addressed along with the challenges associated with and proposed solutions for sifting through large amounts of data. These examples will demonstrate that NASMAT is an enabling platform for achieving the goals in Vision 2040.

Vision 2040↗
NASA NTRSDate not supplied

Hierarchical Multiscale Process Modeling of A Textile Composite Y-Joint for the Aurora D8 Aircraft

Woven polymer matrix composites (PMCs) are widely used in aerospace applications for their favorable specific properties. However, the behavior of the inter- and intra-tow matrix during manufacturing of woven PMCs is difficult to isolate experimentally due to geometric and processing complexities. Classical closed-form homogenization approaches allow for composite thermos-chemo-mechanical properties to be characterized at any fiber volume fraction. In this work, virtual curing is applied to the inter- and intra-tow matrix materials of a plain weave repeating unit cell (RUC). Thermo-chemo-mechanical property evolution within the tows is calculated using the Concentric Cylinder Model (CCM) and the Rule of Mixtures (ROM). Curing is implemented through user-written subroutines within the commercial finite element method software Abaqus. Virtual curing results are compared with those from a linear-elastic thermal cool down simulation in Abaqus. Results indicate that tow property evolution during curing has a non-negligible effect on the final stress state.

curing↗