Engineering topics

Breon, Francois-Marie

Publications and source records attributed to Breon, Francois-Marie.

7 records

NASA NTRS2012

Application of the CALIOP Layer Product to Evaluate the Vertical Distribution of Aerosols Estimated by Global Models: AeroCom Phase I Results

The CALIOP (Cloud-Aerosol Lidar with Orthogonal Polarization) layer product is used for a multimodel evaluation of the vertical distribution of aerosols. Annual and seasonal aerosol extinction profiles are analyzed over 13 sub-continental regions representative of industrial, dust, and biomass burning pollution, from CALIOP 2007-2009 observations and from AeroCom (Aerosol Comparisons between Observations and Models) 2000 simulations. An extinction mean height diagnostic (Z-alpha) is defined to quantitatively assess the models' performance. It is calculated over the 0-6 km and 0-10 km altitude ranges by weighting the altitude of each 100 m altitude layer by its aerosol extinction coefficient. The mean extinction profiles derived from CALIOP layer products provide consistent regional and seasonal specificities and a low inter-annual variability. While the outputs from most models are significantly correlated with the observed Z-alpha climatologies, some do better than others, and 2 of the 12 models perform particularly well in all seasons. Over industrial and maritime regions, most models show higher Z-alpha than observed by CALIOP, whereas over the African and Chinese dust source regions, Z-alpha is underestimated during Northern Hemisphere Spring and Summer. The positive model bias in Z-alpha is mainly due to an overestimate of the extinction above 6 km. Potential CALIOP and model limitations, and methodological factors that might contribute to the differences are discussed.

Aerosols and particles↗

NASA NTRS1994

Global shortwave energy budget at the earth's surface from ERBE observations

A method is proposed to compute the net solar (shortwave) irradiance at the earth's surface from Earth Radiation Budget Experiment (ERBE) data in the S4 format. The S4 data are monthly averaged broadband planetary albedo collected at selected times during the day. Net surface shortwave irradiance is obtained from the shortwave irradiance incident at the top of the atmosphere (known) by subtracting both the shortwave energy flux reflected by the earth-atmosphere system (measured) and the energy flux absorbed by the atmosphere (modeled). Precalculated atmospheric- and surface-dependent functions that characterize scattering and absorption in the atmosphere are used, which makes the method easily applicable and computationally efficient. Four surface types are distinguished, namely, ocean, vegetation, desert, and snow/ice. Over the tropical Pacific Ocean, the estimates based on ERBE data compare well with those obtained from International Satellite Cloud Climatology Project (ISCCP) B3 data. For the 9 months analyzed the linear correlation coefficient and the standard difference between the two datasets are 0.95 and 14 W/sq m (about 6% of the average shortwave irradiance), respectively, and the bias is 15 W/sq m (higher ERBE values). The bias, a strong function of ISCCP satellite viewing zenith angle, is mostly in the ISCCP-based estimates. Over snow/ice, vegetation, and desert no comparison is made with other satellite-based estimates, but theoretical calculations using the discrete ordinate method suggest that over highly reflective surfaces (snow/ice, desert) the model, which accounts crudely for multiple reflection between the surface and clouds, may substantially overestimate the absorbed solar energy flux at the surface, especially when clouds are optically thick. The monthly surface shortwave irradiance fields produced for 1986 exhibit the main features characteristic of the earth's climate. As found in other studies, our values are generally higher than Esbensen and Kushnir's by as much as 80 W/sq m in the tropical oceans. A cloud parameter, defined as the difference between clear-sky and actual irradiances normalized to top-of-atmosphere clear-sky irradiance, is also examined. This parameter, minimally affected by sun zenith angle, is higher in the midlatitude regions of storm tracks than in the intertropical convergence zone (ITCZ), suggesting that, on average, the higher cloud coverage in midlatitudes is more effective at reducing surface shortwave irradiance than opaque, convective, yet sparser clouds in the ITCZ. Surface albedo estimates are realistic, generally not exceeding 0.06 in the ocean, as high as 0.9 in polar regions, and reaching 0.5 in the Sahara and Arabian deserts.

Breon, Francois-Marie↗

NASA NTRS1992

Reflectance of broken cloud fields - Simulation and parameterization

The transfer of solar irradiance in plane parallel and broken cloud fields is simulated using a Monte Carlo method. The angular distribution pattern of radiances exiting the cloud layer is studied with varying cloud geometries, optical thicknesses, cloudiness, and solar zenith angles. A rather large anisotropy of the reflected flux is found, usually increasing with solar zenith angle and with patterns that strongly depend on cloud geometry. The main features are (1) a local maximum of reflected intensity in the forward direction for all cases, (2) a limb darkening for the plane parallel case, and (3) a limb brightening and a local maximum of reflected intensity in the backward direction for broken clouds. A parameterization for the azimuth-average reflectance function is developed. It reproduces the Monte Carlo simulation with a reasonable accuracy and illustrates that, when azimuthally averaged, the reflectance function is dominated by side viewing and intercloud shadowing effects.

Breon, Francois-Marie↗

NASA NTRS1991

Bi-directional reflectance of finite and infinite clouds

The transfer of solar irradiance in plane parallel and broken cloud fields is modeled using a Monte Carlo method. The angular distribution pattern of radiances exiting the cloud layer is studied with varying cloud geometries, optical thicknesses, cloudiness and solar zenith angles. A rather large anisotropy of the reflected flux is found, usually increasing with solar zenith angle and with patterns that strongly depend on cloud geometry. The main features are: a local maximum of reflected intensity in the forward direction for all cases; a limb darkening for the plane parallel case; and a limb brightening and a local maximum of reflected intensity in the backward direction for broken clouds. The method is used to study the cloud reflectance sensitivity to various parameters. A more precise description of cloud field internal and external structure is needed in order to obtain accurate bi directional reflectance diagrams.

Breon, Francois-Marie↗

NASA NTRS1990

Satellite estimates of downwelling longwave irradiance at the surface during FIFE

Two methods of estimating the downward longwave flux at the earth's surface from satellite measurements are evaluated by comparing estimate calculations to in situ measurements. Attention is given to the low degree of accuracy inherent in longwave irradiance measurements and the subsequent difficulty in validating radiative transfer models. The fluxes are determined by using the models by Morcrette et al. (1986) and by Gupta (1989), and the models are found to be highly correlated for the same atmospheric profiles although an inherent bias is noted. The differences between the model computations and in situ measurements are found to be of the same order of magnitude as the differences among the measurements themselves. The difficulty of quantifying the accuracy of radiative transfer models is related to the paucity of reliable surface measurements.

Breon, Francois-Marie↗

NASA NTRS1990

Cloud radiative forcing variability during FIFE

The present study evaluates a set of radiative flux surface measurements, concomitant with other meteorological observations, so as to derive the cloud radiative forcing at the surface. The forcing is analyzed in terms of variability and relation to other meteorological parameters. Both SW and LW cloud forcings show a very large temporal variability due to the changing cloudiness and to measurements and computational uncertainties. No dominant correlation between either components of the cloud radiative forcing and cloudiness were found using sky camera data. This is explained by the fact that forcings are a function not only of cloudiness but also of cloud liquid water content and cloud base height. Surface cloud radiative forcing showed a rather large diurnal cycle with a minimum at local noon for the LW component and two pronounced minima at sunrise and sunset for the SW component.

Breon, Francois-Marie↗

NASA NTRS1990

Radiative transfer model validations during the First ISLSCP Field Experiment

Two simple radiative transfer models, the 5S model based on Tanre et al. (1985, 1986) and the wide-band model of Morcrette (1984) are validated by comparing their outputs with results obtained during the First ISLSCP Field Experiment on concomitant radiosonde, aerosol turbidity, and radiation measurements and sky photographs. Results showed that the 5S model overestimates the short-wave irradiance by 13.2 W/sq m, whereas the Morcrette model underestimated the long-wave irradiance by 7.4 W/sq m.

Frouin, Robert↗