Engineering Papers⌕ Search

Engineering topics

Braun, Artur

Publications and source records attributed to Braun, Artur.

Aerosol-Assisted Deposition for TiO 2 Immobilization on Photocatalytic Fibrous Filters for VOC Degradation

Atomization and spraying are well-established methods for the production of submicrometer- and micrometer- sized powders. In addition, they could be of interest to the immobilization of photocatalytic nanoparticles onto supports because they enable the formation of microporous films with photocatalytic activity. Here, we provide a comparison of aerosol-assisted immobilization methods, such as spray-drying (SD), spray atomization (SA), and spray gun (SG), which were used for the deposition of TiO 2 dispersions onto fibrous filter media. The morphology, microstructure, and electronic properties of the structures with deposited TiO 2 were characterized by SEM and TEM, BET and USAXS, and UV-Vis spectrometry, respectively. The photocatalytic performances of the functionalized filters were evaluated and compared to the benchmark dip-coating method. Our results showed that the SG and SA immobilization methods led to the best photocatalytic and operational performance for the degradation of toluene, whereas the SD method showed the lowest degradation efficiency and poor stability of coating. We demonstrated that TiO2 sprays using the SG and SA methods with direct deposition onto filter media involving dispersed colloidal droplets revealed to be promising alternatives to the dip-coating method owing to the ability to uniformly cover the filter fibers. In addition, the SA method allowed for fast and simple control of the coating thickness as the dispersed particles were continuously directed onto the filter media without the need for repetitive coatings, which is common for the SG and dip-coating methods. Our study highlighted the importance of the proper immobilization method for the efficient photocatalytic degradation of VOCs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Observation of Potential-Induced Hydration on the Surface of Ceramic Proton Conductors Using In Situ Near-Ambient Pressure X-ray Photoelectron Spectroscopy

Interactions of ceramic proton conductors with the environment under operating conditions play an essential role on material properties and device performance. It remains unclear how the chemical environment of material, as modulated by the operating condition, affects the proton conductivity. Combining near-ambient pressure X-ray photoelectron spectroscopy and impedance spectroscopy, we investigate the chemical environment changes of oxygen and the conductivity of BaZr 0.9 Y 0.1 O 3-δ under operating condition. Changes in O 1s core level spectra indicate that adding water vapor pressure increases both hydroxyl groups and active proton sites at undercoordinated oxygen. Applying external potential further promotes this hydration effect, in particular, by increasing the amount of undercoordinated oxygen. The enhanced hydration is accompanied by improved proton conductivity. Here, this work highlights the effects of undercoordinated oxygen for improving the proton conductivity in ceramics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

From inert gas to fertilizer, fuel and fine chemicals: N 2 reduction and fixation

The 100th anniversary of a leading nitrogen fixation technology developer like CASALE SA is a reason to reflect over the 20th century successful solution of the problem of world food supply, and to look out for solutions for sustainable developments with respect to ammonia production. Here, we review the role of nitrogen as essential chemical constituent in photosynthesis and biology, and component of ammonia as it is used as fertilizer for primary production by photosynthesis for farming and food supply and its future role as energy carrier. While novel synthesis methods and very advanced synchrotron based x-ray analytical techniques are being developed, we feel it is important to refer to the historical and economical context of nitrogen. The breaking of the N≡N triple bond remains a fundamental chemical and energetic problem in this context. We review the electrochemical ammonia synthesis as an energetically and environmentally benign method. Two relatively novel X-ray spectroscopy methods, which are relevant for the molecular understanding of the catalysts and biocatalysts, i.e. soft X-ray absorption spectroscopy and nuclear resonant vibration spectroscopy are presented. We illustrate the perceived reality in fertilizer usage on the field, and fertilizer production in the factory complex with photos and thus provide a contrast to the academic view of the molecular process of ammonia function and production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic structure origin of conductivity and oxygen reduction activity changes in low-level Cr-substituted (La,Sr)MnO{sub 3}

The electronic structure of the (La{sub 0.8}Sr{sub 0.2}){sub 0.98}Mn{sub 1−x}Cr{sub x}O{sub 3} model series (x = 0, 0.05, or 0.1) was measured using soft X-ray synchrotron radiation at room and elevated temperature. O K-edge near-edge X-ray absorption fine structure (NEXAFS) spectra showed that low-level chromium substitution of (La,Sr)MnO{sub 3} resulted in lowered hybridisation between O 2p orbitals and M 3d and M 4sp valance orbitals. Mn L{sub 3}-edge resonant photoemission spectroscopy measurements indicated lowered Mn 3d–O 2p hybridisation with chromium substitution. Deconvolution of O K-edge NEXAFS spectra took into account the effects of exchange and crystal field splitting and included a novel approach whereby the pre-peak region was described using the nominally filled t{sub 2g}↑ state. 10% chromium substitution resulted in a 0.17 eV lowering in the energy of the t{sub 2g}↑ state, which appears to provide an explanation for the 0.15 eV rise in activation energy for the oxygen reduction reaction, while decreased overlap between hybrid O 2p–Mn 3d states was in qualitative agreement with lowered electronic conductivity. An orbital-level understanding of the thermodynamically predicted solid oxide fuel cell cathode poisoning mechanism involving low-level chromium substitution on the B-site of (La,Sr)MnO{sub 3} is presented.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Entanglement of charge transfer, hole doping, exchange interaction, and octahedron tilting angle and their influence on the conductivity of La{sub 1-x}Sr{sub x}Fe{sub 0.75}Ni{sub 0.25}O{sub 3-{delta}:} A combination of x-ray spectroscopy and diffraction

Substitution of La by Sr in the 25% Ni doped charge transfer insulator LaFeO{sub 3} leads to structural changes that inflect the electrical conductivity, which is caused by small polaron hopping via charge transfer and exchange interactions. The substitution forms electron holes and causes a structural transition from orthorhombic to rhombohedral symmetry, and then to cubic symmetry. The structural crossover is accompanied by a crossover from the Fe{sup 3+}-O{sup 2-}-Fe{sup 3+} superexchange interaction to the Fe{sup 3+}-O{sup 2-}-Fe{sup 4+} double exchange interaction in the course of substitution, as evidenced by a considerable increase in the conductivity at ambient temperature. The charge transfer and exchange interactions depend on the superexchange angle, which approaches 180 deg. upon increasing Sr concentration. An increase in superexchange angle leads to an increase in overlapping between the O 2p and the Fe/Ni 3d orbitals.

36 MATERIALS SCIENCE↗

Hydrostatic pressure decreases the proton mobility in the hydrated BaZr{sub 0.9}Y{sub 0.1}O{sub 3} proton conductor

Impedance spectroscopy on the hydrated proton conductor BaZr{sub 0.9}Y{sub 0.1}O{sub 3} at high temperatures shows that the bulk proton conductivity activation energy E{sub b} scales with the strain parameter epsilon, as achieved by hydrostatic pressures up to 2 GPa, suggesting that large lattices favor proton diffusivity. At high temperature, E{sub b} increases upon pressure by 40%. The grain boundary activation energy Eg is around twice as E{sub b}, indicating higher proton mobility in grain boundaries as a result of pressure induced sintering. An expanded lattice with strain parameter epsilon>1 should have lower E{sub b}, suggesting that thin films expansive tensile strain could have larger proton conductivity.

36 MATERIALS SCIENCE↗

Introduction

Explore the source record for details and available documents.

14 SOLAR ENERGY↗