Engineering Papers⌕ Search

Engineering topics

Brandjes, C.

Publications and source records attributed to Brandjes, C..

Test report dot7A type A liquid packaging

This section presents a general description of the DOT Specification 7A Type A liquid content packaging (HVYTAL), the liquid content evaluated as its payload, acceptable payload shipping configurations and features special to its use. This test report documents compliance with the regulatory safety requirements of 49 CFR Parts 173.24, 173.24a, 173.27, 173.410, 173.412, 173.461 – 173.466 and 178.350.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Test report dot 7A type a liquid packaging

This test report documents the performance of Savannah River National Laboratory’s (SRNL’s) U.S. Department of Transportation (DOT) Specification 7A; General Packaging, Type A shielded liquid shipping packaging and compliance with the regulatory requirements of Title 49 of the Code of Federal Regulations (CFR). The primary use of this packaging design is for the transport of radioactive liquids of up to 1.3 liters in an unshielded configuration and up to 113 mL of radioactive liquids in a shielded configuration, with no more than an A2 quantity in either configuration, over public highways and/or commercial aircraft. The contents are liquid radioactive materials sufficiently shielded and within the activity limits specified in173.435 or 173.433 for A2 (normal form) materials, as well as within the analyzed thermal heat limits. Any contents must be compatibly packaged and must be compatible with the packaging. The basic packaging design is based on the U.S. Department of Energy’s (DOE’s) Model 9979 Type A fissile shipping packaging designed and tested by SRNL. The shielded liquid configuration consists of the outer and inner drums of the 9979 package with additional low density polyethylene (LDPE) dunnage nesting a tungsten shielded cask assembly (WSCA) within the 30-gallon inner drum. The packaging model for the DOT Specification 7A, Type A liquids packaging is HVYTAL.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Obtaining a Special Administrative License Exemption to Ship the West Valley Melter Box - 16327

In order to ship the West Valley Melter Package (WVMP) package to support its disposal, the U.S. Department of Energy (DOE) requested a one-time shipment license exemption from the U.S. Nuclear Regulatory Commission (NRC). Based on content, the previously constructed WVMP, containing residual borosilicate glass and Low Density Cellular Concrete was shown to require a Type B Package. Therefore, Title 10 of the United States Code of Federal Regulations, Part 71 (10 CFR 71) required that radioactive releases under Normal Conditions of Transport (NCT) and Hypothetical Accident Conditions (HAC) would remain less than 1 E-7 A{sub 2}/hour and 1 E-1 A{sub 2}/week, respectively. Although the NRC normal method for demonstrating conformance to the 10CFR71 requirement is through performance of leak rate testing per American National Standards Institute (ANSI) standard N14.5, the WVMP does not contain a pressure vessel; therefore, performance of leak rate testing was not applicable/possible. Instead, an alternate method, adapted from DOE Handbook 3010 was used to show that the maximum allowed 10 CFR 71 radionuclide release rates for NCT and HAC would not be exceeded. Summarizing the effort, this paper provides the technical synopsis for requesting the exemption. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗