Engineering Papers⌕ Search

Engineering topics

Bradley, Christopher R.

Publications and source records attributed to Bradley, Christopher R..

The Source Physics Experiment (SPE) Science Plan

The Source Physics Experiment (SPE) series is a long-term NNSA research and development effort designed to improve U.S. arms control and nuclear nonproliferation verification and monitoring capabilities. The findings from the SPE will advance the United States’ nuclear explosion monitoring capabilities, particularly with respect to detection, discrimination and determination of yields associated with small nuclear explosions that can be lost amid the noisy seismo-acoustic background from other sources. The data generated from the SPE, a series of well-designed and recorded chemical explosions, will contribute to the development and validation of first-principles explosive source generated seismo-acoustic modeling codes. These codes will then facilitate the update of semi-empirical methods, currently based on historic test site data, such that key explosion observables can be reproduced, thus improving confidence in nuclear test monitoring in new areas and/or under novel emplacement conditions. The overall SPE project is comprised of both the development of the new explosion simulation codes and the chemical explosion test series. The chemical explosion test series will generate the empirical data required to both develop and validate the new simulation codes.

58 GEOSCIENCES↗

A novel framework for elastoplastic behaviour of anisotropic solids

A general framework for developing nonlinear hyperelastic/plastic constitutive laws for anisotropic solids experiencing large strains and strain rates has been developed. The proposed framework does not rely on the “a priori” known strain energy function, but instead introduces a physical decomposition of the material element into seven physically independent stress bearing mechanisms, each of which has a constitutive law in terms of internal moments described by a scalar function of a single variable. Furthermore, the model has been encoded into a combined finite-discrete element method and tested against static geomechanical test data. The numerical validation experiments show the model can reproduce plastic anisotropic behavior in both biaxial and uniaxial loading of a geomaterial.

58 GEOSCIENCES↗

The Source Physics Experiment (SPE) Science Plan (Version 2.4c)

The Source Physics Experiment (SPE) series is a long-term NNSA research and development effort designed to improve U.S. arms control and nuclear nonproliferation verification and monitoring capabilities. The findings from the SPE will advance the United States’ nuclear explosion monitoring capabilities, particularly with respect to detection, discrimination and determination of yields associated with small nuclear explosions that can be lost amid the noisy seismo-acoustic background from other sources. The data generated from the SPE, a series of well-designed and recorded chemical explosions, will contribute to the development and validation of first-principles explosive source generated seismo-acoustic modeling codes. These codes will then facilitate the update of semi-empirical methods, currently based on historic test site data, such that key explosion observables can be reproduced, thus improving confidence in nuclear test monitoring in new areas and/or under novel emplacement conditions. The overall SPE project is comprised of both the development of the new explosion simulation codes and the chemical explosion test series. The chemical explosion test series will generate the empirical data required to both develop and validate the new simulation codes.

58 GEOSCIENCES↗

Geologic fracturing method and resulting fractured geologic structure

Detonation control modules and detonation control circuits are provided herein. A trigger input signal can cause a detonation control module to trigger a detonator. A detonation control module can include a timing circuit, a light-producing diode such as a laser diode, an optically triggered diode, and a high-voltage capacitor. The trigger input signal can activate the timing circuit. The timing circuit can control activation of the light-producing diode. Activation of the light-producing diode illuminates and activates the optically triggered diode. The optically triggered diode can be coupled between the high-voltage capacitor and the detonator. Activation of the optically triggered diode causes a power pulse to be released from the high-voltage capacitor that triggers the detonator.

58 GEOSCIENCES↗

SPE-4-prime Calculations on Sympathetic detonation and Preliminary Confinement [Slides]

Peak pressure is very low compared with input pressures that lead to detonation in most explosives (> 100 MPa). As an illustration, Gibbs and Popolato data for PETN at density 1.4 g/cc shows a 500 MPa shock transits to detonation only after a run distance of > 10 mm. The above data are consistent with the RP-83 design - the PETN in the detonator gets a real whack from the EBW to achieve prompt initiation. 500 MPa is 5 kilobar, which is a low pressure in the shock initiation arena. The 4 MPa input pressure is 0.04 kilobar, which is very low. After traveling through the intervening geologic media, the pressure will arrive as a ramp rather than a shock, which is much less effective at initiating explosives. In fact, a compression wave may desensitize the explosive. The most sensitive HE, the PETN in the detonator, is shielded by the mass of ANFO and the pentolite boosters, and so the pressure input to the detonator will be significantly less than that experienced by the ANFO. An additional factor is that the abandoned charge was thermally compromised, and the effect of the somewhat elevated temperature on the PETN and the SHANFO is most likely to desensitize them. This has been observed at LLNL with PETN, and the manufacturer of the SHANFO is the source of the information on its response to temperature. The only possibility posited by one of us is failure of the geologic media resulting in a puncture / perforation of the SHANFO charge. If sufficient shear energy were put into this charge, it could conceivably initiate. This is difficult to quantify and seems like a remote possibility, and at any rate is outside the expected behavior of the geologic media as I understand the problem. Information on the effect of temperature on SHANFO is in the enclosed report that analyzes the failure of SPE 4. I think there are additional possibilities that were not evaluated in the report, but it does provide some useful data on SHANFO sensitivity at elevated temperatures. I don't know if you have seen it, so I enclose a copy. PETN (Jon L. Maienschein, PhD Director, LLNL Energetic Materials Center)

58 GEOSCIENCES↗

SPE Confinement

Abstract Not Provided

Containment, Confinement, Source Physics Experimen↗

Source Physics Experiment modeling: YEARLY REPORT FOR THE PERIOD Jan-Dec 2012

The Office of Nuclear Detonation Detection identifies characterization of the explosion source as a fundamental research area. Our ability to characterize explosion sources from earthquakes relies on empirical laws that are not covering all the possible cases of location, site structure and yields of possible explosions. Our empirical knowledge needs to be completed by a physical understanding of seismic wave generation. NA22 has funded the LANL SPE seismic project to develop a new source model under the Ground-Based Nuclear Explosion Monitoring Research and Development (GNEM-R&D) Program. NA22 also funds computational support of the seismic source model development. Hydrodynamic computations using realistic material response models combined with a comprehensive series of field experiments provided by the SPE program are needed for test and validation of the new seismic source models. The following three essential elements, (1) model development, (2) numerical simulations of non-linear material response, and (2) field experimentation, will be brought to bear on a predictive capability for broadband P and S wavefields with a sound physical basis for seismic monitoring applications. This research will advance our ability to address yield estimation for UNE conducted in proliferant nations and provide a better understanding of the coupling of explosion sources to the seismic wavefield.

58 GEOSCIENCES↗