Engineering Papers⌕ Search

Engineering topics

Boyle, Timothy J.

Publications and source records attributed to Boyle, Timothy J..

At least 37 records · Page 2

Molecular tracers and modified proppants for monitoring underground fluid flows

The present invention relates to modified proppants and methods of using the modified proppants that use metal ligand tracers to characterize subterranean fluid flow. The metal and ligands are best chosen to be a strongly-coordinating, chelating ligand with a functional group for the chosen flow environment.

Kemp, Richard A.↗

Rapid synthesis of gallium alloys

The ability to generate complex gallium alloys using metal amides, Ga(NR 2 ) 3 and M(NR 2 ) n , is easily accomplished by heating the two metal amides in predetermined ratios. The product can be isolated as Ga x M y where x and y can vary.

36 MATERIALS SCIENCE↗

Synthesis, characterization, and computational modeling of 6,6'-(((2-hydroxyethyl)azanediyl)bis(methylene))bis(2,4-di-tert-butylphenol) modified group 4 metal alkoxides

The coordination behavior of the tridentate alkoxy ligand 6,6'-(((2-hydroxyethyl)azanediyl)bis(methylene)) bis(2,4-di-tert-butylphenol) (termed H 3 -AM-DBP 2 ) with group 4 metal alkoxides ([M(OR) 4 ]) in a 1:1 ratio was previously found to generate [(ONep)Ti(κ 4 (O,O’,O”,N)-AM-DBP2)] and [(OR)Zr(κ 4 (μ-O,O’,O”,N)-AM-DBP 2 )] 2 (M = Zr, Hf). Additional studies revealed that increasing the stoichiometric ratio to 1:2 H3-AM-DBP 2 :[M(OR) 4 ] led to the isolation of [(ONep)Ti(κ 4 (μ-O,O’,O”,N)-AM-DBP2)(μ-ONep)Ti(ONep) 3 ] (1)•tol, [(OBu t)Zr(κ 4 (μ-O,O’,O”,N)-AM-DBP2)(μ-OBu t)Zr(OBu t )3] (2) and [(OBu t)Hf(κ 4 (μ-O,O’,O”,N)-AM-DBP2)(μ-OBu t )Hf(OBu t ) 3 ] (3). The asymmetric dinuclear complexes of 1-3 resemble the chelation of a [M(OR) 4 ] moiety to a “(OR)M(κ 4 (O,O’,O”,N)-AM-DBP 2 )” fragment. The metal complexed by the AM-DBP 2 ligand has a pseudo octahedral geometry while the other metal adopts an intermediate trigonal bipyramidal (TBP-5)/square base pyramidal (SBP-5) geometry for 1 but a distorted SBP-5 for both 2 and 3. The structure and properties of 1-3 were analyzed by computational modeling and fully characterized by standard analytical methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Airborne Release Fractions from Surrogate Nuclear Waste Fires Containing Lanthanide Nitrates and Depleted Uranium Nitrate in 30% Tributyl Phosphate in Kerosene

Airborne contaminants from fires containing nuclear waste represent significant health hazards and shape the design and operation of nuclear facilities. Much of the data used to formulate DOE-HDBK-3010-94, “Airborne Release Fractions/Rates and Respirable Fractions for Nonreactor Nuclear Facilities,” from the U.S. Department of Energy, were taken over 40 years ago. The objectives of this study were to reproduce experiments from Pacific Northwest Laboratories conducted in June 1973 employing current aerosol measurement methods and instrumentation, develop an enhanced understanding of particulate formation and transport from fires containing nuclear waste, and provide modeling and experimental capabilities for updating current standards and practices in nuclear facilities. A special chamber was designed to conduct small fires containing 25 mL of flammable waste containing lutetium nitrate, ytterbium nitrate, or depleted uranium nitrate. Carbon soot aerosols showed aggregates of primary particles ranging from 20 to 60 nm in diameter. In scanning electron microscopy, ~200-nm spheroidal particles were also observed dispersed among the fractal aggregates. The 200-nm spherical particles were composed of metal phosphates. Airborne release fractions (ARFs) were characterized by leaching filter deposits and quantifying metal concentrations with mass spectrometry. The average mass-based ARF for 238 U experiments was 1.0 × 10 -3 with a standard deviation of 7.5 × 10 -4 . For the original experiments, DOE-HDBK-3010-94 states, “Uranium ARFs range from 2 × 10 -4 to 3 × 10 -3 , an uncertainty of approximately an order of magnitude.” Therefore, current measurements were consistent with DOE-HDBK-3010-94 values. ARF values for lutetium and ytterbium were approximately one to two orders of magnitude lower than 238 U. Furthermore, metal nitrate solubility may have varied with elemental composition and temperature, thereby affecting ARF values for uranium surrogates (Yb and Lu). In addition to ARF data, solution boiling temperatures and evaporation rates can also be deduced from experimental data.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Thallium salen fluorescent tracers

Thallium salens can be synthesized by reacting thallium alkoxide with a salen ligand. As examples of the invention, the dinuclear complexes Tl2-(salo-But) and Tl2-(saloPh-But) were synthesized by the reaction of thallium ethoxide with (H2-salo-But) or (H2-saloPh-But). These thallium salens may have applications as fluorescent tracers (or taggants) for subterranean fluid flows.

36 MATERIALS SCIENCE↗

Evaluation of Commercially Available Precursors for Obscuring Wet Industrial Irradiator Facility Pools to Delay Adversarial Source Removal (Part 2)

The behavior of commercially available potential obscurants for cobalt-60 ( 60 Co) wet-source storage industrial irradiator facilities (IRFs) were further evaluated for corrosive behavior of Nordion C-188 pencil stubs and obscurant properties under radiation exposure ( 60 Co). The potential obscurants studied included: titania aqueous dispersions (TAD - water soluble white paint), Chlorazol Black (CBOD - Chlorazol Black organic dye), powdered milk (COW - calcium obscurant in water), diatomaceous earth (DEA - diatomaceous earth additive), and rhodamine 6G (R6G). For corrosion efforts, stubs from an inert C-188 pencil-source rod were soaked in obscurant solutions and visually inspected. For radiation stability, obscurant samples were exposed to 60 Co radiation sources at 207 rad/s. The results from these studies reveal: the obscurants had no impact on the surrogate samples and may assist in terms of corrosion resistance; materials that did not rely on organic compounds to provide obscurance performed the best, as the organic compounds decomposed too rapidly in the high radiation environment, whereas the materials survived.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Single-source synthesis of ceramic oxide nanoparticles

The tris(trimethylsilyl)silanol (H-SST) ligand can be reacted with a Group 4 or 5 metal alkoxides in a solvent to form an SST-modified metal alkoxide precursor. Exemplary Group 4 precursors include [Ti(SST)2(OR)2] (OR=OPri, OBut, ONep); [Ti(SST)3(OBun)]; [Zr(SST)2(OBut)2(py)]; [Zr(SST)3(OR)] (OR=OBut, ONep); [Hf(SST)2(OBut)2]; and [Hf(SST)2(ONep)2(py)n] (n=1, 2), where OPri=OCH(CH3)2, OBut=OC(CH3)3, OBun=O(CH2)3CH3, ONep=OCH2C(CH3)3, and py=pyridine. Exemplary Group 5 precursors include [V(SST)3(py)2]; [Nb(SST)3(OEt)2]; [Nb(O)(SST)3(py)]; 2[H][(Nb(μ-O)2(SST))6(μ6-O)]; [Nb8O10(OEt)18(SST)2.⅕Na2O]; [Ta(SST)(μ-OEt)(OEt)3]2; and [Ta(SST)3(OEt)2]; where OEt=OCH2CH3. When thermally processed, the precursors can form unusual core-shell nanoparticles. For example, HfO2/SiO2 core/shell nanoparticles have demonstrated resistance to damage in extreme irradiation and thermal environments.

Boyle, Timothy J.↗