Engineering Papers⌕ Search

Engineering topics

Boylan, Frank A.

Publications and source records attributed to Boylan, Frank A..

Control rods for light water reactors

A control rod for a nuclear fuel assembly is described herein that includes a neutron absorbing material having a melting point greater than 1500° C. that does not form a eutectic with a melting point less than 1500° C., and may further include a cladding material having a melting point greater than 1500° C. The cladding material is selected from the group consisting of silicon carbide, zirconium, a zirconium alloy, tungsten, and molybdenum. The absorbing material is selected from the group consisting of Gd2O3, Ir, B4C, Re, and Hf. The metal cladding or the absorbing material may be coated with an anti-oxidation coating of Cr with or without a Nb intermediate layer.

Lahoda, Edward J.↗

Cr-doped U 3 Si 2 composite fuels under steam corrosion

Dense Cr-doped U 3 Si 2 composite fuels were manufactured by spark plasma sintering, and the effects of Cr addition on mechanical properties and oxidation resistance were investigated. Furthermore, dynamic oxidation testing by thermogravimetric analysis revealed significantly improved oxidation resistance of U 3 Si 2 with minimal doping of 3 wt% Cr. The onset oxidation temperature increased to above 550 °C in air and ~520 °C in steam conditions for the 5 wt% and 10 wt% Cr-doped composites. Steam corrosion testing under 360 °C for 24 hours indicated well-maintained pellet integrity without pulverization for the 10 wt% Cr-doped U 3 Si 2 pellet which only showed minor surface oxidation. The first promising results open up the possibility of designing and manufacturing metal additive-doped U 3 Si 2 composite fuels with significantly-improved corrosion resistance as a potential candidate for accident tolerant fuels.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Development of LWR Fuels with Enhanced Accident Tolerance ATF Feasibility Analysis and Final Technical Report Deliverable for the Westinghouse Accident Tolerant Fuel Program (Rev. 2)

The beyond design basis accident at Fukushima Daiichi in March 2011 and the Three Mile Island accident in 1979 imply that severe nuclear accidents may occur at somewhat higher frequencies than previously predicted, and that the financial liabilities of such accidents can cripple a utility. While current fuel is more than adequate for design basis accidents, the potential for harm from beyond design basis accidents (BDBA) has been a driver for Westinghouse development efforts since 2003. After Fukushima, other fuel vendors also began pursuing new fuel materials that can provide significant increases in the time, enabling reactor operators to respond to unforeseen events before significant releases of fuel materials and fission products occur. In order to be commercially successful, accident tolerant fuel (ATF) products must also provide significant fuel cost savings, operating cost improvements as well as safety improvements. This report documents the engineering, design and testing that occurred from October 1, 2016, through September 30, 2018, by the Westinghouse team. In addition, it includes: 1. The results of modeling and simulation work completed to date that supports technical feasibility of the ATF concept in meeting the goals of the enhanced ATF program including a core level analysis predicting how an existing LWR will perform when loaded with ATF. 2. Regulatory Analysis showing path to LTA/LTR acceptance. 3. Business Analysis showing commercial viability of the ATF concept.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Program Management Plan EnCore ® Accident Tolerant Fuel (ATF) Program

This Program Management Plan (PMP) is developed to support Westinghouse’s vision of developing and commercializing the Accident Tolerant Fuel. The near term goal of this Program is to deliver 2 fuel assemblies that consists of LTRs for Exelon Byron Unit 2 in spring of 2019. The longer term goal of this program is deployment of LTAs in 2022 of a mixture of coated zirconium cladding and SiC cladding with ADOPT and U3Si2 fuels. This is a high complexity program and is one of the largest research and development programs in Westinghouse and as such, the project scope is expected to change continuously. Integrated change control will be invoked as necessary. The Program consists of multiple funding streams (internal through Westinghouse innovation funding), external (through the DOE). The DOE funding consists of two phases: 1. Phase 2 – funded by DOE award number DE-NE0008222. 2. Phase 2B – funded by DOE – Westinghouse proposal reference # LTR-AMER-MKG-18-826, Rev. 1, August 23, 2018 (10/18 to 2/21), Award No. DE-NE0008824. 3. Cost share contributions from Westinghouse and program partners.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Development of LWR Fuels with Enhanced Accident Tolerance

Significant progress was made on the technical, licensing, and business aspects of the Westinghouse Electric Company’s Enhanced Accident Tolerant Fuel (ATF) by the Westinghouse ATF team. The fuel pellet options included waterproofed U 15 N and U 3 Si 2 and the cladding options SiC composites and zirconium alloys with surface treatments. Technology was developed that resulted in U 3 Si 2 pellets with densities of >94% being achieved at the Idaho National Laboratory (INL). The use of U 3 Si 2 will represent a 15% increase in U235 loadings over those in UO₂ fuel pellets. This technology was then applied to manufacture pellets for 6 test rodlets which were inserted in the Advanced Test Reactor (ATR) in early 2015 in zirconium alloy cladding. The first of these rodlets are expected to be removed in about 2017. Key characteristics to be determined include verification of the centerline temperature calculations, thermal conductivity, fission gas release, swelling and degree of amorphization. Waterproofed UN pellets have achieved >94% density for a 32% U 3 Si 2 /68% UN composite pellet at Texas A&M University. This represents a U235 increase of about 31% over current UO 2 pellets. Pellets and powders of UO 2 , UN, and U 3 Si 2 the were tested by Westinghouse and Los Alamos National Laboratory (LANL) using differential scanning calorimetry to determine what their steam and 20% oxygen corrosion temperatures were as compared to UO 2 . Cold spray application of either the amorphous steel or the Ti 2 AlC was successful in forming an adherent ~20 micron coating that remained after testing at 420°C in a steam autoclave. Tests at 1200°C in 100% steam on coatings for Zr alloy have not been successful, possibly due to the low density of the coatings which allowed steam transport to the base zirconium metal. Significant modeling and testing has been carried out for the SiC/SiC composite/SiC monolith structures. A structure with the monolith on the outside and composite on the inside was developed which is the current baseline structure and a SiC to SiC tube closure approach. Permeability tests and mechanical tests were developed to verify the operation of the SiC cladding. Steam autoclave (420°C), high temperature (1200°C) flowing steam tests and quench tests were carried out with minimal corrosion, mechanical or hermeticity degradation effect on the SiC cladding or end plug closure. However, in-reactor loop tests carried out in the MIT reactor indicated an unacceptable degree of corrosion, likely due to the corrosive effect of radiolysis products which attacked the SiC.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗