Engineering Papers⌕ Search

Engineering topics

Bourassa, R. J.

Publications and source records attributed to Bourassa, R. J..

12 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Operation of the computer model for direct atomic oxygen exposure of Earth satellites

One of the primary causes of material degradation in low Earth orbit (LEO) is exposure to atomic oxygen. When atomic oxygen molecules collide with an orbiting spacecraft, the relative velocity is 7 to 8 km/sec and the collision energy is 4 to 5 eV per atom. Under these conditions, atomic oxygen may initiate a number of chemical and physical reactions with exposed materials. These reactions contribute to material degradation, surface erosion, and contamination. Interpretation of these effects on materials and the design of space hardware to withstand on-orbit conditions requires quantitative knowledge of the atomic oxygen exposure environment. Atomic oxygen flux is a function of orbit altitude, the orientation of the orbit plan to the Sun, solar and geomagnetic activity, and the angle between exposed surfaces and the spacecraft heading. We have developed a computer model to predict the atomic oxygen exposure of spacecraft in low Earth orbit. The application of this computer model is discussed.

Bourassa, R. J.↗
NASA NTRS1995

Operation of the computer model for microenvironment atomic oxygen exposure

A computer model for microenvironment atomic oxygen exposure has been developed to extend atomic oxygen modeling capability to include shadowing and reflections. The model uses average exposure conditions established by the direct exposure model and extends the application of these conditions to treat surfaces of arbitrary shape and orientation.

Bourassa, R. J.↗
NASA NTRS1995

Operation of the computer model for microenvironment solar exposure

A computer model for microenvironmental solar exposure was developed to predict solar exposure to satellite surfaces which may shadow or reflect on one another. This document describes the technical features of the model as well as instructions for the installation and use of the program.

Gillis, J. R.↗
NASA NTRS1995

Effects of space exposure on metals flown on the Long Duration Exposure Facility

This report includes measurements on copper, aluminum, and stainless steel from the Long Duration Exposure Facility (LDEF). Summaries of the performance of a variety of metals flown on LDEF are presented. An extensive list of references directs the reader to other detailed investigations. The influence of contamination on a number of measurements is documented.

Pippin, H. Gary↗
NASA NTRS1993

Model of spacecraft atomic oxygen and solar exposure microenvironments

Computer models of environmental conditions in Earth orbit are needed for the following reasons: (1) derivation of material performance parameters from orbital test data, (2) evaluation of spacecraft hardware designs, (3) prediction of material service life, and (4) scheduling spacecraft maintenance. To meet these needs, Boeing has developed programs for modeling atomic oxygen (AO) and solar radiation exposures. The model allows determination of AO and solar ultraviolet (UV) radiation exposures for spacecraft surfaces (1) in arbitrary orientations with respect to the direction of spacecraft motion, (2) overall ranges of solar conditions, and (3) for any mission duration. The models have been successfully applied to prediction of experiment environments on the Long Duration Exposure Facility (LDEF) and for analysis of selected hardware designs for deployment on other spacecraft. The work on these models has been reported at previous LDEF conferences. Since publication of these reports, a revision has been made to the AO calculation for LDEF, and further work has been done on the microenvironments model for solar exposure.

Bourassa, R. J.↗
NASA NTRS1993

LDEF microenvironments, observed and predicted

A computer model for prediction of atomic oxygen exposure of spacecraft in low earth orbit, referred to as the primary atomic oxygen model, was originally described at the First Long Duration Exposure Facility (LDEF) Post-Retrieval Symposium. The primary atomic oxygen model accounts for variations in orbit parameters, the condition of the atmosphere, and for the orientation of exposed surfaces relative to the direction of spacecraft motion. The use of the primary atomic oxygen model to define average atomic oxygen exposure conditions for a spacecraft is discussed and a second microenvironments computer model is described that accounts for shadowing and scattering of atomic oxygen by complex surface protrusions and indentations. Comparisons of observed and predicted erosion of fluorinated ethylene propylene (FEP) thermal control blankets using the models are presented. Experimental and theoretical results are in excellent agreement. Work is in progress to expand modeling capability to include ultraviolet radiation exposure and to obtain more detailed information on reflecting and scattering characteristics of material surfaces.

Bourassa, R. J.↗
NASA NTRS1992

LDEF microenvironments, observed and predicted

Complex protrusions and surface indentations on spacecraft equipment alter exposure environments by casting shadows, producing reflections and scattering incident atomic oxygen flux and UV radiation. A computer model is being developed to predict these effects. The model accounts for any arbitrary shape, size, orientation, or curvature of exposed objects. LDEF offers a unique opportunity to compare model prediction with observations. For this purpose, a study is underway on twelve of LDEF's copper grounding straps. These straps were exposed at various angles from the ram vector during the LDEF flight. Microenvironment variables include shadowing and reflections from clamps and fasteners, and varying exposure caused by bending of the straps. Strap measurements include optical properties, surface film composition by ESCA, and film thickness measurements by optical interference techniques. The features of the microenvironment model and the analytical methods used to examine the straps are discussed. Data are presented showing predicted microenvironmental variations. These variations are compared with observed point to point differences in surface properties of the straps.

Bourassa, R. J.↗
NASA NTRS1992

Atomic oxygen exposure of LDEF experiment trays

Atomic oxygen exposures were determined analytically for rows, longerons, and end bays of the Long Duration Exposure Facility (LDEF). The calculations are based on an analytical model that accounts for the effects of thermal molecular velocity, atmospheric temperature, number density, spacecraft velocity, incidence angle, and atmospheric rotation on atomic oxygen flux. Results incorporate variations in solar activity, geomagnetic index, and orbital parameters occurring over the 6-year flight of the spacecraft. To facilitate use of the data, both detailed tabulations and summary charts for atomic oxygen fluences are presented.

Bourassa, R. J.↗
NASA NTRS1992

Solar exposure of LDEF experiment trays

Exposure to solar radiation is one of the primary causes of degradation of materials on spacecraft. Accurate knowledge of solar exposure is needed to evaluate the performance of materials carried on the Long Duration Exposure Facility (LDEF) during its nearly 6 year orbital flight. Presented here are tables and figures of calculated solar exposure for the experiment rows, longerons, and end bays of the spacecraft as functions of time in orbit. The data covers both direct solar and earth reflected radiation. Results are expressed in cumulative equivalent sun hours (CESH) or the hours of direct, zero incidence solar radiation that would cause the same irradiance of a surface. Space end bays received the most solar radiation, 14,000 CESH; earth end bays received the least, 4,500 CESH. Row locations received between 6,400 CESH and 11,200 CESH with rows facing either eastward or westward receiving the most radiation and rows facing northward or southward receiving the least.

Bourassa, R. J.↗
NASA NTRS1992

Atomic oxygen and ultraviolet radiation mission total exposures for LDEF experiments

Atomic oxygen and solar radiation exposures were determined analytically for rows, longerons, and end bays of the LDEF. Calculated atomic oxygen exposures are based on an analytical model that accounts for the effects of thermal molecular velocity, atmospheric temperature, number density, spacecraft velocity, incidence angle, and atmospheric rotation. Results also incorporate variations in solar activity, geomagnetic index, and orbital parameters occurring over the six year flight of the spacecraft. Solar radiation exposure calculations are based on the form factors reported in the Solar Illumination Data Package prepared by NASA Langley. The earth albedo value for these calculations was based on the Nimbus 7 earth radiation data set. Summary charts for both atomic oxygen and solar radiation exposure are presented to facilitate the use of the data generated by LDEF experimenters.

Bourassa, R. J.↗
NASA NTRS1991

Atomic oxygen and ultraviolet radiation mission total exposures for LDEF experiments

An analytical treatment of the effect of thermal molecular velocity on spacecraft atomic oxygen (AO) flux is presented. The analysis leads to a closed form equation that incorporates the effect of atmospheric temperature, number density, spacecraft velocity, and incidence angle on AO flux. The effects of atmospheric rotation, solar activity, and geomagnetic index on AO flux are also included on the computer model. Data developed with the model are presented for the Long Duration Exposure Facility (LDEF). The results incorporate variations in the defining environmental and orbital parameters of the spacecraft over its six year orbital flight. Cumulative ultraviolet solar and albedo exposures were calculated .

Bourassa, R. J.↗