Engineering Papers⌕ Search

Engineering topics

Bouquet, F. L.

Publications and source records attributed to Bouquet, F. L..

32 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Reflectance of metallic indium for solar energy applications

An investigation has been conducted in order to compile quantitative data on the reflective properties of metallic indium. The fabricated samples were of sufficiently high quality that differences from similar second-surface silvered mirrors were not apparent to the human eye. Three second-surface mirror samples were prepared by means of vacuum deposition techniques, yielding indium thicknesses of approximately 1000 A. Both hemispherical and specular measurements were made. It is concluded that metallic indium possesses a sufficiently high specular reflectance to be potentially useful in many solar energy applications.

Bouquet, F. L.↗
NASA NTRS1983

Environmental responses of solar reflective surfaces

An assessment is undertaken of the environmental responses of solar reflective surfaces, with emphasis on dish-type concentrator surfaces exposed to the conditions of Southern California. A generalized mathematical model for specific solar reflective surfaces can be formulated on the basis of either experimental or assumed site degradation/corrosion data. In addition, the fabrication parameters of a parabolic reflecting surface and its substrate can be used to model combined reflective characteristics for the postulated environmental conditions.

Bouquet, F. L.↗
NASA NTRS1982

Radiation effects on spacecraft materials for Jupiter and near-earth Orbiters

An overview of radiation effects on spacecraft materials is given in this paper. Specifically, the environment of the Jupiter Orbiting Spacecraft, Galileo, is treated along with analysis methods and simulated testing. Summaries of previous and present material test results are given. Preliminary results of surface erosion on insulation from a Space Shuttle experiment are summarized.

Bouquet, F. L.↗
NASA NTRS1982

Ultraviolet-Induced Mirror Degradation

Recent tests of second-surface mirrors show that ultraviolet radiation penetrates glass and metalized zone and impinges upon backing paint. According to report, many backing materials are degraded by ultraviolet radiation. Mirror corrosion is a serious problem in solar-energy collection systems. Effects of UV on polymeric materials have been studied, and in general, all are degraded by UV. Polymers most resistant to UV radiation are polyimides.

Bouquet, F. L.↗
NASA NTRS1982

Easily Assembled Reflector for Solar Concentrators

Reflectors for concentrating solar collectors are assembled quickly and inexpensively by method that employs precontoured supports, plastic film, and adhesive to form a segmented glass mirror. New method is self-focusing, and does not require skilled labor at any stage. Contoured ribs support film and mirror segments of reflector. Nine mirror segments are bonded to sheet. Combined mirror surface closely approximates a spherical surface with a radius of curvature of 36 inches (0.91 m).

Bouquet, F. L.↗
NASA NTRS1982

Indium Second-Surface Mirrors

Second-surface mirrors are formed by vapor deposition of indium onto glass. Mirrors have reflectances comparable to those of ordinary silver or aluminized mirrors and are expected to show superior corrosion resistance. Mirrors may be used in solar concentrators.

Bouquet, F. L.↗
NASA NTRS1982

Glasses for Solar-Cell Arrays

Report presents data on glass for encapsulation of solar-cell arrays, with special emphasis on materials and processes for automated high-volume production of low-cost arrays. Commercial suppliers of glass are listed. Factors that affect the cost of glass are examined: type (sheet, float, or plate), formulation, and energy consumed in manufacturing.

Bouquet, F. L.↗
NASA NTRS1981

Glass as encapsulation for low-cost photovoltaic solar arrays

In photovoltaic systems, the encapsulant material that protects the solar cells should be highly transparent and very durable. Glass satisfies these two criteria and is considered a primary candidate for low-cost, photovoltaic encapsulation systems. In this paper, various aspects of glass encapsulation are treated that are important for the designer of photovoltaic systems. Candidate glasses and available information defining the state of the art of glass encapsulation materials and processes for automated, high volume production of terrestrial photovoltaic devices and related applications are presented. The desired characteristics of glass encapsulation are (1) low degradation rates, (2) high transmittance, (3) high reliability, (4) low-cost, and (5) high annual production capacity. The glass design areas treated herein include the types of glass, sources, prices, physical properties and glass modifications, such as antireflection coatings.

Bouquet, F. L.↗
NASA NTRS1980

Glass for low-cost photovoltaic solar arrays

Various aspects of glass encapsulation that are important for the designer of photovoltaic systems are discussed. Candidate glasses and available information defining the state of the art of glass encapsulation materials and processes for automated, high volume production of terrestrial photovoltaic devices and related applications are presented. The criteria for consideration of the glass encapsulation systems were based on the low-cost solar array project goals for arrays: (1) a low degradation rate, (2) high reliability, (3) an efficiency greater than 10 percent, (4) a total array price less than $500/kW, and (5) a production capacity of 500,000 kW/yr. The glass design areas discussed include the types of glass, sources and costs, physical properties, and glass modifications, such as antireflection coatings.

Bouquet, F. L.↗
NASA NTRS1979

Radiation design considerations for advanced Jupiter spacecraft

This paper considers one aspect of the complex radiation design considerations for planetary spacecraft, namely the approach used for solving the effects of radiation on materials problems. An overview of the approach developed at JPL for Voyager, and currently being used on Galileo, is treated briefly. Examples of the postulated Jovian charged particle levels are given. The types of computer analyses codes used, the mass shielding techniques that evolved and the recommended shielding techniques for future planetary spacecraft are treated.

Bouquet, F. L.↗
NASA NTRS1979

Designer's guide to radiation effects on materials for use on Jupiter fly-bys and orbiters

This paper summarizes the state-of-the-art of the complex field of radiation effects on spacecraft materials. It is intended as a guide for designers of systems exposed to damaging electrons and protons. The emphasis is on the relative damage levels for the more common materials that may be used. Information on the preliminary flux and fluence levels of the yet to be designed Jupiter orbiter, Galileo, is also presented.

Bouquet, F. L.↗
NASA NTRS1976

On the thermoelastic analysis of solar cell arrays and related material properties

Accurate prediction of failure of solar cell arrays requires accuracy in the computation of thermally induced stresses. This was accomplished by using the finite element technique. Improved procedures for stress calculation were introduced together with failure criteria capable of describing a wide range of ductile and brittle material behavior. The stress distribution and associated failure mechanisms in the N-interconnect junction of two solar cell designs were then studied. In such stress and failure analysis, it is essential to know the thermomechanical properties of the materials involved. Measurements were made of properties of materials suitable for the design of lightweight arrays: microsheet-0211 glass material for the solar cell filter, and Kapton-H, Kapton F, Teflon, Tedlar, and Mica Ply PG-402 for lightweight substrates. The temperature-dependence of the thermal coefficient of expansion for these materials was determined together with other properties such as the elastic moduli, Poisson's ratio, and the stress-strain behavior up to failure.

Salama, M. A.↗