Engineering Papers⌕ Search

Engineering topics

Boukhalfa, Hakim

Publications and source records attributed to Boukhalfa, Hakim.

At least 55 records · Page 3

Reduction and potential remediation of U(VI) by dithionite at an in-situ recovery mine: Insights gained by δ 238 U

In-situ recovery is a common method of mining U ore. This technique involves injecting an oxidant to oxidize U deposited as insoluble U(IV) to soluble U(VI) and a complexing agent to form mobile U(VI) compounds, which are extracted from mining waters. Unfortunately, U concentrations often remain elevated in groundwater following this mining process. One promising technique to decrease U concentrations to acceptable levels is in-situ remediation where a reductant is injected into the mined area to reduce U(VI) back to insoluble U(IV). Here we assess the efficacy of the chemical reductant dithionite to reduce U(VI) concentrations. While dithionite can reduce environmental Cr(VI), dithionite has previously never been tested for reducing U(VI) in the environment. We determine how effectively dithionite remediates U(VI) contamination using aqueous U concentration and δ 238 U data. U concentrations and δ 238 U decrease during the dithionite experiment, demonstrating that dithionite induces U(VI) reduction. As dithionite is removed by pumping, U concentrations and δ 238 U increase towards background levels, but U(VI) reduction continues for an extended period. In conclusion, measurements demonstrate that re-oxidation and remobilization does not appear to occur due to the reducing condition of groundwater.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Selective hydrothermal extraction of lanthanides: Mimicking natural ore-forming processes [Slides]

Rare Earth Elements (REE) consumption in the US was 20,000 metric ton in 2018. China controls 97% of the global REE market. The aims for new technology are to 1. Avoid investing in extraction of cheap LREE, extract M/HREE only → increase the value of the intermediate/final product, 2. Exclude extraction and concentration of U and Th → avoid investment in rad remediation, and 3. Maximize environmental friendliness of the technology. Hints from nature can aid in achieving these amis.

01 COAL, LIGNITE, AND PEAT↗

Salt Heater Test (FY19), Rev. 2

This report summarizes the 2019 fiscal year (FY19) status of the borehole heater test in salt funded by the US Department of Energy Office of Nuclear Energy (DOE-NE) Spent Fuel and Waste Science & Technology (SFWST) campaign. This report satisfies SFWST level-three milestone report M3SF-19SN010303033. This report is an update of the April 2019 level-two milestone report M2SF-19SNO10303031 to reflect the nearly complete as-built status of the borehole heater test. This report discusses the fiscal year 2019 (FY19) design, implementation, and preliminary data interpretation plan for a set of borehole heater tests call the brine availability tests in salt (BATS), which is funded by the DOE Office of Nuclear Energy (DOE-NE) at the Waste Isolation Pilot Plant (WIPP), a DOE Office of Environmental Management (DOE-EM) site. The organization of BATS is outlined in Project Plan: Salt In-Situ Heater Test (SNL, 2018). An early design of the field test is laid out in Kuhlman et al. (2017), including extensive references to previous field tests, which illustrates aspects of the present test. The previous test plan by Stauffer et al. (2015) places BATS in the context of a multi-year testing strategy, which involves tests of multiple scales and processes, eventually culminating in a drift-scale disposal demonstration. This level-3 milestone report is an update of a level-2 milestone report from April 2019 by the same name. The update adds as-built details of the heater test, which at the time of writing (August 2019) is near complete implementation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Design of a containment apparatus for synchrotron XAS measurements of radioactive fluid samples under high temperatures and pressures

The simple working principles and versatility of the hydrothermal diamond-anvil cell (HDAC) make it signifcantly useful for synchrotron x-ray studies of aqueous and fluid samples at high pressure-temperature (P-T) conditions. Yet, safety concerns need to be overcome in order to use the HDAC for synchrotron studies of aqueous radioactive samples at high temperatures and pressures. For accomplishment of such hydrothermal experiments of radioactive materials at synchrotron beamlines, the samples are required to be enclosed in a containment system employing three independent layers of airtight sealing at some synchrotron facilities while enabling access to the sample using several experimental probes, including incoming and outgoing x-rays. In this article, we report the design and implementation of a complete radiological safety enclosure system for an HDAC specialized for high P-T x-ray absorption spectroscopy (XAS) measurements of aqueous solutions containing the actinides at synchrotron beamlines. The enclosure system was successfully tested for XAS experiments using the HDAC with aqueous samples containing depleted uranium at temperatures ranging from 25 to 500 °C and pressures ranging from vapor pressure to 350 MPa.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Development of an Experimental Approach for Thermal Testing in Bedded Salt - 19431

Safe and permanent isolation of used nuclear fuel (UNF) and high-level nuclear waste (HLW) is an integral component of the cradle-to-grave philosophy of radioactive waste management. Out of the multitude of rock types considered for the permanent deep disposal of nuclear waste (tuff, shale, granite, clay, and salt), salt has received significant interest particularly because of the advantage offered by salt as an impermeable and dry medium with self-sealing properties. The concept of HLW disposal in salt has been investigated through several testing campaigns in the U.S. and in Germany. Serval knowledge gaps still exist in our understanding of how brine is generated and how it transports under heat generating conditions. These knowledge gaps limit our ability to build a robust safety case for the disposal of heat generating waste in salt. The current manuscript reports on efforts performed to develop a field-testing campaign to study brine and water vapor migration in heated salt. The paper summarizes initial work done in a phased thermal testing program in bedded salt at the Waste Isolation Pilot Plant (WIPP), Carlsbad, New Mexico. The testing to date has been focused on existing boreholes and is being used to 'shakedown' the process for implementation of a more refined testing program that will be implemented in freshly drilled boreholes planned for FY2019. We designed and deployed a heater assembly that consisted of a packer, borehole deformation gauge, heater block, a network of thermocouples, and a pressure transducer setup to measure in situ temperature and pressure. The assembly was deployed in an existing borehole and several heating and cooling experiments were performed to test the performance of the different instruments fielded. We report on the results obtained for brine generation as a function of time and heating and cooling cycles and temperature evolution in the rock salt. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Enthalpies of formation and phase stability relations of USi, U 3 Si 5 and U 3 Si 2

U–Si intermetallic compounds have drawn great attention due to their potential application as nuclear fuels. However, the thermodynamic properties and phase equilibria of this binary system from ambient to high temperature conditions are not fully understood. Via high temperature oxidative drop calorimetry and detailed characterization of the initial and final phases, we have experimentally determined the standard enthalpies of formation of USi and U 3 Si 5.07 at 298 K to be –43.2 ± 6.2 and –43.8 ± 9.0 kJ/mol·atom, respectively. The energetics of the tetragonal USi (t-USi, space group I 4/ mmm ) phase has also been calculated with Density Functional Theory (DFT) for the first time. Combining the obtained formation enthalpies with the heat capacities measured previously, we assessed the thermodynamic stability of t-USi relative to a phase assemblage of two other U–Si phases, U 3 Si 5.07 and U 3 Si 2 , from ambient temperature to 1200 K. The tetragonal USi is thermodynamically more stable than U 3 Si 5.07 + U 3 Si 2 , which supports previously published phase diagram (H. Okamoto and T. Massalski, 1990 [1]): specifically, at least one stable USi phase exists when the U content is 50 at.%. In conclusion, further thermodynamic and phase equilibrium studies are needed for a more comprehensive understanding of the U–Si system across broader compositional and temperature ranges.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Salt Heater Test (FY19)

This report discusses the fiscal year 2019 (FY19) design, implementation, and preliminary data interpretation plan for a set of borehole heater tests call the brine availability tests in salt (BATS), which is funded by the DOE Office of Nuclear Energy (DOE-NE) at the Waste Isolation Pilot Plant (WIPP). The organization of BATS is outlined in Project Plan: Salt In-Situ Heater Test. An early design of the field test is laid out in Kuhlman et al., including extensive references to previous field tests, which illustrates aspects of the present test. The previous test plan by Stauffer et al., places BATS in the context of a multi-year testing strategy, which involves tests of multiple scales and processes, possibly culminating in a drift-scale disposal demonstration.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Sample seal-and-drop device and methodology for high temperature oxide melt solution calorimetric measurements of PuO 2

Thermodynamic properties of refractory materials, such as standard enthalpy of formation, heat content, and enthalpy of reaction, can be measured by high temperature calorimetry. In such experiments, a small sample pellet is dropped from room temperature into a calorimeter operating at high temperature (often 700 °C) with or without a molten salt solvent present in an inert crucible in the calorimeter chamber. However, for hazardous (radioactive, toxic, etc.) and/or air-sensitive (hygroscopic, sensitive to oxygen, pyrophoric, etc.) samples, it is necessary to utilize a sealed device to encapsulate and isolate the samples, crucibles, and solvent under a controlled atmosphere in order to prevent the materials from reactions and/or protect the personnel from hazardous exposure during the calorimetric experiments. We have developed a sample seal-and-drop device (calorimetric dropper) that can be readily installed onto the dropping tube of a calorimeter such as the Setaram AlexSYS Calvet-type high temperature calorimeter to fulfill two functions: (i) load hazardous or air-sensitive samples in an air-tight, sealed container and (ii) drop the samples into the calorimeter chamber using an “off-then-on” mechanism. As a case study, we used the calorimetric dropper for measurements of the enthalpy of drop solution of PuO 2 in molten sodium molybdate (3Na 2 O · 4MoO 3 ) solvent at 700 °C. The obtained enthalpy of –52.21 ± 3.68 kJ/mol is consistent with the energetic systematics of other actinide oxides (UO 2 , ThO 2 , and NpO 2 ). In conclusion, this capability has thus laid the foundation for thermodynamic studies of other Pu-bearing phases in the future.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Colloid-Facilitated Transport: Studies Related to CFM Project at GTS

Presentation Summary: Insights have been gained as to how to obtain defensible answers to predict radionuclide transport in fractured granites. However, site specific studies still need to be performed to to gain confidence in the prediction; The CFT ladder should be applied to evaluate the potential for enhanced transport with colloids, but most indications are that only very small fractions of strongly-sorbing radionuclides will be capable of CFT over repository time and distance scales; CFT requires very slow desorption from colloids AND very slow filtration of the RN-bearing colloids (relative to time scales of interest); Interrogating such slow processes is a challenge, especially if they are associated with a very small fraction of colloids or very small fraction of sorption sites on colloids (or both); Intuitively, one might expect that stable colloids generated from wasteform degradation that have radionuclides incorporated into their structure (as opposed to asorption association) might pose the biggest risk; Experiments have informed generic modeling approach, including GDSA; Experiments have provided insights into how experimental designs can be tailored and improved to address site-specific and scenario-specific issues; Different host rocks, EBS vs. natural system, and DPC concept can all, in principle, be addressed via different parameterizations of the generic model, with the understanding that parameterizations must be developed through site- and scenario-specific experimental testing

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

AnO2-Cl Coordination Chemistry at High P/T

This presentation covers the following topics: Materials synthesis & characterization; In-situ structural determination using synchrotron and Raman techniques; Thermodynamic measurements (solubility measurements + calorimetry)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An experimental study of the solubility and speciation of thorium in chloride-bearing aqueous solutions at temperatures up to 250 °C

In this study, the solubility and speciation of Th in Cl-bearing solutions saturated in ThO2 was investigated experimentally at 150, 175, 200, 225 and 250°C, and saturated water vapor pressure. At these experimental conditions (pH 25°C < 3.8, mNaCl < 2.5), Th-chloride complexation is insignificant, and the solubility of Th is controlled by hydrolysis. The two main species in solution were identified as Th(OH) 2 2+ and Th(OH) 4 ° and formed via the reactions Th 4+ + 2OH - ↔ Th(OH)$2+\atop{2}$ and Th 4+ + 4OH - ↔ Th(OH)$0\atop{4}$. The logarithms of the formation constants determined for the first reaction are 23.91 ± 0.05, 24.79 ± 0.07, 25.78 ± 0.05, and 25.85 ± 0.05 for 175, 200, 225 and 250°C, respectively, and 42.18 ± 0.06, 43.50 ± 0.07, 43.17 ± 0.08, and 43.74 ± 0.11 for the second reaction at the same temperatures. Formation constants could not be determined reliably for 150 °C. Extrapolations of our formation constants to 25°C are in excellent agreement with the values determined at 25 °C by Neck and Kim (2001) and Ekberg et al. (2000). Finally, for natural systems buffered by thorianite (ThO 2 ), the solubility determined in our study likely reflects a minimum, as the presence of additional ligands would lead to higher solubility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Laboratory and Field Investigations of In-Situ Remediation of Cr(VI) in the LANL Regional Aquifer - 18683

Two biogeochemical in-situ remediation strategies are currently being evaluated to help manage a Cr(VI) plume present in deep groundwater beneath Los Alamos National Laboratory. The first is the addition of a chemical reductant, sodium dithionite, and the second is the use of a bio-stimulant, molasses. This paper summarizes the results to date of laboratory and field investigations of the effectiveness of these two amendments in the Los Alamos aquifer. A semi-empirical model based on the results of laboratory batch and column experiments has been developed to describe dithionite reactions and subsequent cation exchange processes in the aquifer. The model is being used to predict the effective 'reach' of dithionite in field deployments, and so far the predictions of the model are consistent with observations in a field push-pull test involving dithionite. Contrary to what has been frequently assumed, the laboratory data suggest that the resulting Cr(VI) reduction capacity depends more strongly on the amount of dithionite consumed than on the amount of iron reduced during the treatment, and an empirical approach is being used to predict reduction capacity generated in the field test. Laboratory experiments have demonstrated a robust ability of molasses to promote biomass growth that imparts significant Cr(VI) reduction capacity to sediments. Molasses has been deployed in a field push-drift test (no active pumping) in a well in which the aquifer Darcy velocity is known to be high. To date, the molasses has not drifted out of the injection well, so it has not been possible to make comparisons with laboratory experiments. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Project Plan: Salt in Situ Heater Test.

This project plan gives a high-level description of the US Department of Energy Office of Nuclear Energy (DOE-NE) Spent Fuel and Waste Disposition (SFWD) campaign in situ borehole heater test project being planned for the Waste Isolation Pilot Plant (WIPP) site This plan provides an overview of the schedule and responsibilities of the parties involved. This project is a collaborative effort by Sandia, Los Alamos, and Lawrence Berkeley National Laboratories to execute a series of small-diameter borehole heater tests in salt for the DOE-NE SFWD campaign. Design of a heater test in salt at WIPP has evolved over several years. The current design was completed in fiscal year 2017 (FY17), an equipment shakedown experiment is underway in April FY18, and the test implementation will begin in summer of FY18. The project comprises a suite of modular tests, which consist of a group of nearby boreholes in the wall of drifts at WIPP. Each test is centered around a packer-isolated heated borehole (5" diameter) containing equipment for water-vapor collection and brine sampling, surrounded by smaller-diameter (2" diameter) satellite observation boreholes. Observation boreholes will contain temperature sensors, tracer release points, electrical resistivity tomography (ERT) sensors, fiber optic sensing, and acoustic emission (AE) measurements, and sonic velocity sources and sensors. These satellite boreholes will also be used for plugging/sealing tests. The first two tests to be implemented will have the packer-isolated borehole heated to 120°C, with one observation borehole used to monitor changes. Follow-on tests will be designed using information gathered from the first two tests, will be conducted at other temperatures, will use multiple observation boreholes, and may include other measurement types and test designs.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Summary of a Gas Transport Tracer Test in the Deep Cerros Del Rio Basalts, Mesita del Buey, Los Alamos NM.

Here we describe results from a tracer test in the Cerros del Rio basalt beneath Mesita del Buey, Technical Area 54 (TA-54) at Los Alamos National Laboratory (LANL or the Laboratory). This report follows from plans outlined in our previous Tracer Test Work Plan (LANL 2016). These activities were conducted by LANL to further characterize subsurface properties of the Cerros del Rio basalts at Material Disposal Area (MDA) L (Figure 1.1-1). The work presented follows from the “Interim Measures Work Plan for Soil-Vapor Extraction of Volatile Organic Compounds from Material Disposal Area L, Technical Area 54, Revision 1,” submitted to the New Mexico Environment Department (NMED) in September 2014 (LANL 2014). Remediation of the MDA L vapor plume by soil-vapor extraction (SVE) is recommended as part of the final remedy in the “Corrective Measures Evaluation Report for Material Disposal Area L, Solid Waste Management Unit 54-006, at Technical Area 54, Revision 2” to meet a remedial action objective of preventing groundwater from being impacted above a regulatory standard by the transport of volatile organic compounds (VOCs) to groundwater through soil vapor (LANL 2011).

54 ENVIRONMENTAL SCIENCES↗