Engineering Papers⌕ Search

Engineering topics

Bodechtel, J.

Publications and source records attributed to Bodechtel, J..

11 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Use of AVIRIS data to the definition of optimised specifications for land applications with future spaceborne imaging spectrometers

Recent experience with airborne imaging spectrometers demonstrated the advantages of narrow band sensors over broad band scanners for characterizing the nature, extent, and physical status of typical land surfaces. Information on key spectral features associated with various land surfaces can be obtained from the data of such instruments, which can be used to simulate spaceborne imaging spectrometer data and to assess their information content if comprehensive underpinning is provided by ground data. The collection of such information was an issue of airborne imaging spectrometer campaigns like the NASA MAC-Europe 1991. Airborne and ground data obtained from different test sites in Europe are utilized for a comparative analysis of the spectral signatures of various land surfaces (vegetation, bare soils and rocks, and mixed soil/rock-vegetation) as seen from different imaging spectrometers like Airborne Visible/Infrared Imaging Spectrometer (AVIRIS), GERIS 63 band scanner, and CASI. The following items are discussed: (1) the significance of different spectral regions within the wavelength interval between 0.4 m and 2.5 m for the differentiation of different land units; (2) recommendations on the optimum band selection and band-widths to be used for the application of future satellite-based imaging spectrometers for land applications; (3) the boundaries for the detection of plant features in mixed-soil plant spectra and the influence of different soil properties on the mixture of the spectra; (4) recommendations on the optimum spatial resolution and recording dates for the discrimination of spectral features of various surface types; and (5) evaluation of different data compressing techniques for the optimum extraction of spectral information from imaging spectrometry data.

Bodechtel, J.↗
NASA NTRS1988

Comparative point-spread function calculations for the MOMS-1, Thematic Mapper and SPOT-HRV instruments

Point-spread functions (PSF) comparisons were made between the Modular Optoelectronic Multispectral Scanner (MOMS-01), the LANDSAT Thematic Mapper (TM) and the SPOT-HRV instruments, principally near Lake Nakuru, Kenya. The results, expressed in terms of the width of the point spread functions at the 50 percent power points as determined from the in-scene analysis show that the TM has a PSF equal to or narrower than the MOMS-01 instrument (50 to 55 for the TM versus 50 to 68 for the MOMS). The SPOT estimates of the PSF range from 36 to 40. When the MOMS results are adjusted for differences in edge scanning as compared to the TM and SPOT, they are nearer 40 in the 575 to 625 nm band.

Salomonson, V. V.↗
NASA NTRS1986

Comparative analysis of different sensor data (Landsat-TM and MOMS) for earth observation and impact on future sensor development

The missions of the German Modular Optoelectronic Multispectral Scanner (MOMS) aboard two STS flights demonstrated the feasibility of a novel concept with regard to both technical and scientific objectives. On account of the successful missions, a cooperation was agreed between the German Federal Minister for Research nad Technology and NASA for comparing MOMS observations with the more familiar operational Landsat-TM data over selected test sites, as a means of obtaining some relative measure of performance. This paper summarizes the results obtained and presents the MOMS-02, a further experimental representative of the MOMS program aiming at the realization of an operational system for the mid-nineties.

Bodechtel, J.↗
NASA NTRS1985

Preliminary results of a quantitative comparison of the spectral signatures of Landsat Thematic Mapper (TM) and Modular Optoelectronic Multispectral Scanner (MOMS).

Operationally acquired Thematic Mapper and experimental MOMS-01 data are evaluated quantitatively concerning the systems spectral response and performance for geoscientific applications. Results show the two instruments to be similar in the spectral bands compared. Although the MOMS scanner has a smaller IFOV, it has a lower modulation transfer function performance for small, low contrast features as compared to Thematic Mapper. This deficiency does not only occur when MOMS was switched to the low gain mode. It is due to the CD arrays used (ITEK CCPD 1728).

Bodechtel, J.↗
NASA NTRS1978

Application of LANDSAT data and digital image processing

The author has identified the following significant results. Based on LANDSAT 1 and 2 data, applications in the fields of coal mining, lignite exploration, and thematic mapping in geology are demonstrated. The hybrid image processing system, its software, and its utilization for educational purposes is described. A pre-operational European satellite is proposed.

Bodechtel, J.↗
NASA NTRS1975

Application of LANDSAT and Skylab data for land use mapping in Italy

Utilizing LANDSAT and Skylab multispectral imagery of 1972 and 1973, a land use map of the mountainous regions of Italy was evaluated at a scale of 1:250,000. Seven level I categories were identified by conventional methods of photointerpretation. Images of multispectral scanner (MSS) bands 5 and 7, or equivalents were mainly used. Areas of less than 200 by 200 m were classified and standard procedures were established for interpretation of multispectral satellite imagery. Land use maps were produced for central and southern Europe indicating that the existing land use maps could be updated and optimized. The complexity of European land use patterns, the intensive morphology of young mountain ranges, and time-cost calculations are the reasons that the applied conventional techniques are superior to automatic evaluation.

Bodechtel, J.↗
NASA NTRS1975

Regional tectonic evaluation of the Tuscan Apenine, vulcanism, thermal anomalies and the relation to structural units

The author has identified the following significant results. The geological interpretation on data exhibiting the Italian peninsula led to the recognition of tectonic features which are explained by a clockwise rotation of various blocks along left-handed transform faults. These faults can be interpreted as resulting from shear due to main stress directed north-eastwards. A land use map of the mountainous regions of Italy was produced on a scale of 1:250,000. For the digital treatment of MSS-CCTs an image processing software was written in FORTRAN 4. The software package includes descriptive statistics and also classification algorithms.

Bodechtel, J.↗
NASA NTRS1973

New aspects on the tectonic of the Alps and the Apennines revealed by ERTS-1 data

An analysis of the tectonic situation in the Alps and Apennine Mountains based on ERTS-1 imagery is presented. It is stated that the ERTS-1 imagery reveals connections between shearing systems of more than regional importance which could not be determined previously. The tracing of locally known fault distances by ERTS-1 imagery is discussed.

Bodechtel, J.↗