Engineering topics

Bloom, Ira

Publications and source records attributed to Bloom, Ira.

At least 19 records

DOE OSTI2023

Quantitative Analysis of Origin of Lithium Inventory Loss and Interface Evolution over Extended Fast Charge Aging in Li Ion Batteries

During the extreme fast charging (XFC) of lithium-ion batteries, lithium inventory loss (LLI) and reaction mechanisms at the anode/electrolyte interface are crucial factors in performance and safety. Determining the causes of LLI and quantifying them remain an essential challenge. We present mechanistic research on the evolution and interactions of aging mechanisms at the anode/electrolyte interface. We used NMC 532 /graphite pouch cells charged at rates of 1, 6, and 9 C up to 1000 cycles for our investigation. The cell components were characterized after cycling using electrochemical measurements, inductively coupled plasma optical emission spectroscopy, 7 Li solid-state nuclear magnetic resonance spectroscopy, and high-performance liquid chromatography/mass spectrometry. The results indicate that cells charged at 1 C exhibit no Li plating, and the increase of SEI thickness is the dominant source of the Li loss. In contrast, Li loss in cells charged at 9 C is related to the formation of the metallic plating layers (42%) the SEI layer (38.1%) and irreversible intercalation into the bulk graphite (19%). XPS analysis suggests that the charging rate has little influence on the evolution of SEI composition. The interactions between competing aging mechanisms were evaluated by a correlation analysis. In conclusion, the quantitative method established in this work provides a comprehensive analytical framework for understanding the synergistic coupling of anodic degradation mechanisms, forecasting SEI failure scenarios, and assessing the XFC lithium-ion battery capacity fade.

25 ENERGY STORAGE↗

DOE OSTI2023

Pouch cells with 15% silicon calendar-aged for 4 years

Small amounts of high-capacity silicon-based materials are already used in the anode of commercial Li-ion batteries, helping increase their energy density. Despite their remarkable storage capability, silicon continu-ously reacts with the electrolyte, accelerating time-dependent cell performance fade. Nevertheless, very limited information is available on the specific consequences of this reactivity for the calendar aging of Li-ion cells. Here, we analyze aging effects on 450 mAh pouch cells containing 15 wt% of Si (and 73 wt% graphite) after storage at 21 °C for four years. We show that severe losses of Si capacity occurred due to particle isolation when cells were stored at high states of charge (SOC), but not when cells were fully discharged prior to storage. Impedance rise was also significantly higher when cells were kept at high SOCs and was mostly due to phenomena taking place at the cathode; the continuous electrolyte reduction at the anode did not lead to a major increase in bulk electrode resistance. A series of post-test characterization provided additional information on the effects of time and SOC on the calendar aging of Si-containing cells. In conclusion, our study highlights the many challenges posed by Si during calendar aging and can inform future studies in the field.

25 ENERGY STORAGE↗

DOE OSTI2023

Transition Metal Dissolution in Lithium-Ion Cells: A Piece of the Puzzle

Static leaching tests were performed using the chemically delithiated positive electrode materials, LiFePO 4 , LiCoO 2 , LiMn 2 O 4 , LiNiO 2 , and LiNi 0.8 Mn 0.1 Co 0.1 O 2 . Instead of the common electrolyte, which contains LiPF 6 , the solvent consisted of only ethylene carbonate (EC) and ethyl methyl carbonate (EMC), limiting the possible reactions to only those that depend on the solvent. The product liquids from these experiments showed that there were lithium-bearing species in common, such as Li(EC) + and Li(EMC) + . Interestingly, we found evidence of electrolyte degradation products in both the positive-and negative-ion mass spectral results. The positive-ion results showed that the products tended to coordinate to lithium. In conclusion, the negative-ion results showed that most of the products tended to complex with transition metals. It was difficult to discern which positive ion was associated with which negative ion.

25 ENERGY STORAGE↗

DOE OSTI2022

A new mechanism of stabilizing SEI of Si anode driven by crosstalk behavior and its potential for developing high performance Si-based batteries

Stabilizing solid electrolyte interphase (SEI) is a key factor for determining cell performance of Silicon (Si) anode, such as safety, cycle lifetime, and calendar lifetime. Here, we found a new potential for stabilizing SEI of the Si anode, driven by crosstalk with cathode material. Here we investigated the effect of crosstalk on the chemistry of SEI of the Si anode as a function of three different, representative cathode materials: LiNi 0.5 Mn 0.3 Co 0.2 O 2 (NMC532), LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811), and LiFePO 4 (LFP). Specifically, we observed that crosstalk significantly affected the formation and growth mechanism of SEI layer on the Si anodes. Unexpectedly, dissolved Fe ions from the LFP cathode has a positive impact on the chemistry and electrochemical stability of the SEI layer of Si anode compared to the other cathodes, resulting in better electrochemical performance in terms of initial coulombic efficiency and capacity fade.

25 ENERGY STORAGE↗

DOE OSTI2022

Exploring the Promise of Multifunctional “Zintl-Phase-Forming” Electrolytes for Si-Based Full Cells

Li-M-Si ternary Zintl phases have gained attention recently due to their high structural stability, which can improve the cycling stability compared to a bulk Si electrode. Adding multivalent cation salts (such as Mg 2+ and Ca 2+ ) in the electrolyte was proven to be a simple way to form Li-M-Si ternary phases in situ in Si-based Li-ion cells. To explore the promise of Zintl-phaseforming electrolytes, we systematically investigated their application in pouch cells via electrochemical and multiscale postmortem analysis. The introduction of multivalent cations, such as Mg 2+ , during charging can form Li x M y Si ternary phases. They can stabilize Si anions and reduce side reactions with electrolyte, improving the bulk stability. More importantly, Mg 2+ and Ca 2+ incorporate into interfacial side reactions and generate inorganic-rich solid- electrolyte interphase, thus enhancing the interfacial stability. Therefore, the full cells with Zintl-phase-forming electrolytes achieve higher capacity retentions at the C/3 rate after 100 cycles, compared to a baseline electrolyte. Additionally, strategies for mitigating the electrode-level fractures of Si were evaluated to make the best use of Zintl-phase-forming electrolytes. In conclusion, this work highlights the significance of synergistic impact of multifunctional additives to stabilize both bulk and interface chemistry in high-energy Si anode materials for Li-ion batteries.

25 ENERGY STORAGE↗

DOE OSTI2022

Extreme Fast Charging: Effect of Positive Electrode Material on Crosstalk

Extreme fast charging (XFC) is a key requirement for the adoption of battery-based electric vehicles by the transportation sector. However, XFC has been shown to accelerate degradation, causing the capacity, life, and safety of batteries to deteriorate. We tested cells containing five positive electrode chemistries, LFP (olivine structure), LMO (spinel), LCO (layered), NMC811 (layered) and NCA (layered), using fast-charging protocols. After testing, the negative electrodes from cells containing positive electrodes crystallizing with a layered structure were found to have more lithium deposited on their surfaces. Further, those crystallizing with a layered structure also tended to have a larger increase in impedance than those crystallizing with a spinel or olivine structure. Characterization of the negative electrodes by X-ray photoelectron spectroscopy showed that using the concentrations of LiF and Li x PO y F z as metrics, the concentration of LiF in the SEI from the cell with different positive electrodes is LFP > LMO > LCO ~ NMC811 > NCA; and for Li x PO y F z , the order is LMO > LFP > NCA > NMC811 > LCO. Clearly, the positive-electrode material was influencing the amounts of these materials formed.

25 ENERGY STORAGE↗

DOE OSTI2022

Enabling Extreme Fast-Charging: Challenges at the Cathode and Mitigation Strategies

We report charging lithium-ion batteries (LiBs) in 10 to 15 min via extreme fast-charging (XFC) is important for the widespread adoption of electric vehicles (EVs). Lately, the battery research community has focused on identifying XFC bottlenecks and determining novel design solutions. Like other LiB components, cathodes can present XFC bottlenecks, especially when considering long-term battery life. Therefore, it is necessary to develop a comprehensive understanding of how XFC conditions degrade LiB cathodes. The present article reviews relevant cathode-focused studies and summarizes the current understanding regarding cathode performance and aging issues under XFC conditions. Dominant aging modes and mechanisms are identified at different length-scales with electrochemical correlations for LiNi x Mn y Co z O 2 (NMC)-based cathodes. A range of electrochemical techniques and models provide key insights into cathode performance and life issues. A suite of multimodal and multiscale microscopy and X-ray techniques is surveyed to quantify chemical, structural, and crystallographic NMC-cathode degradation. Cathode cycle-life is scaled to equivalent EV miles to illustrate how cathode degradation translates to real-world scenarios and quantifies cathode-related bottlenecks that hinder XFC adoption. Finally, the article discusses several cathode cycle-life aging mitigation strategies with example case studies and identifies remaining challenges.

25 ENERGY STORAGE↗

DOE OSTI2022

Extreme fast charge aging: Effect of electrode loading and NMC composition on inhomogeneous degradation in graphite bulk and electrode/electrolyte interface

Empowering extreme fast charging (XFC) requires a comprehensive understanding of its application with advanced anode and cathode materials in lithium-ion batteries. No report exists for the full extent of limitations for the anode with crosstalk effect from paired cathode as well as Li plating due to electrode loading under XFC. In this study, a combination of cell testing and multiple length characterization is used to investigate XFC aging mechanism in cells with a low loading of 1.5 mAh cm -2 and high loading of 2.5 mAh cm -2 for graphite (Gr)/Ni-rich LiNi x Mn y Co 1-x-y O 2 (NMCs). Operando XRD mappings show 1.5 mAh cm -2 loadings result in higher strain in graphite for all three cathode types. Among the three NMC cathodes, the graphite from NMC532 and NMC811 cells show comparable strain. Scanning electron microscopy (SEM) images show distinct differences between 6-C-charged anodes in two loadings. Significantly increased electrode thickness can be seen due to more damage in the graphite bulk and accumulation of the electrolyte decomposition products in electrode pores. X-ray photoelectron spectroscopy (XPS) reveals both cathode chemistry and Li plating influence the non-uniform SEI composition on graphite surface. We report higher Ni content in NMC811 promotes the higher levels of salt decomposition on the SEI and formation of higher mass of electrolyte aging products.

25 ENERGY STORAGE↗

DOE OSTI2022

Toward practical issues: Identification and mitigation of the impurity effect in glyme solvents on the reversibility of Mg plating/stripping in Mg batteries

Reversible electrochemical magnesium plating/stripping processes are important for the development of high-energy-density Mg batteries based on Mg anodes. Ether glyme solutions such as monoglyme (G1), diglyme (G2), and triglyme (G3) with the MgTFSI 2 salt are one of the conventional and commonly used electrolytes that can obtain the reversible behavior of Mg electrodes. However, the electrolyte cathodic efficiency is argued to be limited due to the enormous parasitic reductive decomposition and passivation, which is governed by impurities. In this work, a systematic identification of the impurities in these systems and their effect on the Mg deposition–dissolution processes is reported. The mitigation methods generally used for eliminating impurities are evaluated, and their beneficial effects on the improved reactivity are also discussed. By comparing the performances, we proposed a necessary conditioning protocol that can be easy to handle and much safer toward the practical application of MgTFSI 2 /glyme electrolytes containing impurities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Batteries (2021 Annual Progress Report)

This document summarizes the progress of VTO battery R&D projects supported during the fiscal year 2021 (FY 2021). In FY 2021, the DOE VTO battery R&D funding was approximately $\$$115 million. Its R&D focus was on the development of high-energy batteries for EVs as well as very high-power devices for hybrid vehicles. The electrochemical energy storage roadmap (which can be found at the EERE Roadmap web page2) describes ongoing and planned efforts to develop electrochemical storage technologies for EVs. To advance battery technology, which can in turn improve market penetration of PEVs, the program investigates various battery chemistries to overcome specific technical barriers, e.g., battery cost, performance, life (both the calendar life and the cycle life), its tolerance to abusive conditions, and its recyclability/sustainability. VTO R&D has had considerable success, lowering the cost of EV battery packs to $\$$185/kWh in 2019 (representing more than 80% reduction since 2008) yet even further cost reduction is necessary for EVs to achieve head-to-head cost competitiveness with ICEs (without Federal subsidies). In addition, today’s batteries also need improvements in such areas as their ability to accept charging at a high rate, referred to as extreme fast charging (XFC) (15 minute charge) – to provide a “refueling” convenience similar to ICEs, and the ability to operate adequately at low temperatures. Research into “next-gen lithium-ion” batteries which would provide such functionalities is one of the R&D focus areas. VTO is funding research on both “next gen” chemistries (which employ an alloy anode and/or a high voltage cathode) and beyond lithium-ion (BLI) chemistries (which can, for example, employ a lithium metal anode).

25 ENERGY STORAGE↗

DOE OSTI2022

Across-Depth Heterogeneity and Irreversibility of Fast-Charge-Driven Lithium Plating

Enabling fast charging in lithium-ion batteries (LIBs) is a key factor for resolving consumers’ “range anxiety” concerns in choosing an electric vehicle over a gasoline-powered one. The best-known issue in the fast charging of current LIBs (based on LiNi x Mn y Co 1–x–y O 2 /graphite) is lithium plating, which is barely reversible and is accompanied by capacity loss over time. Therefore, understanding the reasons for the irreversibility of lithium plating driven by fast charging is critical to enhancing the fast-charging capability of LIBs. Here, a study of the irreversibility and heterogeneity of lithium plating is carried out by using electrochemical analyses, inductively coupled plasma mass spectroscopy, and X-ray photoelectron spectroscopy. Further, the study shows that the majority of the lithium plated during fast charging remains inactive even with very slow discharging rates, implying that most of the plated lithium is irreversibly lost. The study also reveals that chemical compounds such as LiF, Li 2 O and Li 2 (CO 3 ) are formed heterogeneously within the lithium plating and are responsible for some of the irreversibility of the plated lithium.

33 ADVANCED PROPULSION SYSTEMS↗

DOE OSTI2022

A Comprehensive Understanding of the Aging Effects of Extreme Fast Charging on High Ni NMC Cathode

As the battery industry shifts toward high Ni content cathodes, such as LiNi 0.8 Mn 0.1 Co 0.1 O 2 [NMC811], a complete understanding of the degradation mechanisms of NMC811 under extreme fast charging (XFC) (XFC, ≤10–15 min charging) conditions is needed. Such comprehensive understanding would identify the most critical materials gaps that need to be addressed for enabling XFC long-life cells for electric vehicles. This study maps out the key aging mechanisms for NMC811 cycled at different XFC conditions (between 1C and 9C) for up to 1000 cycles. To acquire a fundamental understanding of utilization and degradation, cells are evaluated using a range of electrochemical techniques, and multimodal and multiscale microscopy techniques to quantify chemical, structural, and crystallographic degradation as a function of cycling conditions for the NMC cathode. When comparing NMC811 to NMC532, it is observed that NMC811 has a greater subsurface crystallographic degradation and displays a similar magnitude of subparticle cracking. However, the NMC811 maintains superior performance despite those advanced degradations. Here, the superior cycle life performance is attributed to the NMC811 particles having radially oriented grains and improved transport properties. NMC811 shows between 4.6× and 3.15× reduction in capacity fade than NMC532 for charging rates between 4C (e.g., 15-min charging) and 6C (10-min charging).

25 ENERGY STORAGE↗

DOE OSTI2022

Understanding the Effect of Cathode Composition on the Interface and Crosstalk in NMC/Si Full Cells

Crosstalk between the cathode and the anode in lithium-ion batteries has a great impact on performance, safety, and cycle lifetime. Still, no report exists for a systematic investigation on crosstalk behavior in silicon (Si)-based cells as a function of transition metal composition in cathodes. We studied the effect of crosstalk on degradation of Si-rich anodes in full cells with different cathodes having the same crystal structure but different transition metal compositions, such as LiNi 1/3 Mn 1/3 Co 1/3 O 2 (NM111), LiNi 0.5 Mn 0.3 Co 0.2 O 2 (NMC532), and LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811). We found that the transition metal composition in cathodes, especially Mn ion concentration, significantly affects electrolyte decomposition reactions, even from very early cycles. This change causes differences in the solid electrolyte interphase (SEI) chemistry of each aged Si sample. As a result, each of the aged Si samples has a different electrochemistry, in terms of initial Coulombic efficiency and the mechanism of capacity fade.

25 ENERGY STORAGE↗

DOE OSTI2022

Developing extreme fast charge battery protocols – A review spanning materials to systems

Extreme fast charging (XFC) has become a focal research point in the lithium-battery community over the last several years. As adoption of electric vehicles increases, fast charging has become a key driver in enhancing consumer recharge experience. Recently, the research community has made significant improvements in developing charge protocols to support XFC. New charge protocol designs derived using a combination of advanced, physically derived models, and electrochemical and secondary characterization methods, increase charge acceptance and decrease aging. By coordinating these methods and modifying protocols to account for different material constraints, including lithium plating and cathode particle degradation, novel charge protocols have increased the energy accepted during charging by over 25% in 10 min and increased the charge acceptance prior to a constant-voltage step by approximately 3x. Here, we review several charge-protocol advances, aging factors which are enhanced by XFC and advances which will enable adoption of XFC capable vehicles. These advances include implementing machine learning and other detection algorithms to reduce and classify lithium plating, which is known to significantly degrade cell performance and reduce cell life. The review concludes by discussing full-system fast charge requirements, including electric vehicle service equipment needs for implementing XFC protocols.

25 ENERGY STORAGE↗

DOE OSTI2022

Extreme fast charge aging: Correlation between electrode scale and heterogeneous degradation in Ni-rich layered cathodes

Extreme fast charging (XFC) is a key requirement for the adoption of battery-based electric vehicles by the transportation sector. However, XFC has been shown to accelerate degradation, causing the capacity, life, and safety of batteries to deteriorate. There are no systematic studies in the open literature regarding aging modes in Ni-rich Li y Ni 0.a Mn 0.b Co 0.c O 2 (NMCabc) cathodes caused by fast charging. Herein, we report the effects of cathode composition and electrode loading in pouch cells containing NMC532, 622 and 811 paired with graphite and cycled under XFC conditions. The relative anisotropic volume change in the unit cell increases with Ni content in low-loading cells, while it levels up for all three NMC cathodes in high-loading cells because of substantial Li plating. The amounts of lithium plating and heterogeneity on the anode, determined by crystallographic phase quantification, were found to be correlated with electrode loading and cathode heterogeneity. The concentrations of the transition metals deposited on the anodes depend on NMCabc composition in a complex way. More particle cracking and surface degradation was found in NMC811. Here, the findings in this work provide a new understanding of the failure mechanisms and their practical implications for compositional tuning of future high-Ni NMCabc cathode materials during fast charging.

25 ENERGY STORAGE↗

DOE OSTI2021

Enabling High-Temperature and High-Voltage Lithium-Ion Battery Performance through a Novel Cathode Surface-Targeted Additive

We report lithium-ion batteries (LIBs) are being used in locations and applications never imagined when they were first conceived. To enable this broad range of applications, it has become necessary for LIBs to be stable to an ever broader range of conditions, including temperature and energy. Unfortunately, while negative electrodes have received a great deal of focus in electrolyte development, stabilization of positive electrodes remains an elusive target. Here, we report a novel additive that shows the ability to protect positive electrodes against elevated temperatures and voltages. This additive can be used in small quantities, and its targeted behavior allows it to remain functional in complex electrolyte packages. This can prove an effective approach to targeting specific aspects of cell performance.

25 ENERGY STORAGE↗

DOE OSTI2021

Effect of cathode on crosstalk in Si-based lithium-ion cells

Crosstalk between the cathode and the anode in Li-ion batteries has a great impact on performance, safety and cycle lifetime. However, a systematic investigation of crosstalk behavior in silicon (Si)-based cells with various cathode materials has not been reported. We investigated the crosstalk behavior of a Si anode coupled with one of the following cathodes—LiCoO 2 (LCO), LiNi 0.5 Mn 0.3 Co 0.2 (NMC532), and LiFePO 4 (LFP)—in a full cell. For each electrochemical couple, we compared electrolyte decomposition products, solid electrolyte interphase (SEI) chemistry, and degradation mechanisms during cycling. From a very early stage of cycling, each couple showed different crosstalk behavior; different electrolyte decomposition products and SEI chemistry on the Si anodes were seen. Specifically, the formation and growth mechanism of Si SEI differ depending on cathode materials. For the LFP system, the Si SEI rich in LiF and inorganic species, which is stable and robust. It forms at an early stage of cycle. As a result, the SEI of Si from the LFP system well tolerates SEI breakage due to mechanical changes of Si and suppresses Li loss, resulting in stable cycle life.

25 ENERGY STORAGE↗

DOE OSTI2021

Chemical Interplay of Silicon and Graphite in a Composite Electrode in SEI Formation

In this study, we investigated the effect of the Si/graphite weight ratio in half-cells on the solid electrolyte interphase (SEI) layer's chemistry. The nominal concentrations of active materials were (wt % Si/wt % Gr) 15/73, 30/58, 60/28, and 80/0. The electrolyte in the cells consisted of either 1.2 M LiPF 6 in ethylene carbonate/ethyl methyl carbonate (3:7 by wt) or 1.2 M LiPF 6 in ethylene carbonate:ethyl methyl carbonate (3:7 by wt) + 10 wt % fluoroethylene carbonate. These coin cells were cycled five times at the C/10 rate. As expected, the addition of silicon to the electrode significantly increased the measured capacity. Examination of the aged composite material showed that the electrolyte influenced the concentration of chemical environments on the surface. Depth profiling revealed that these concentrations of surface environments changed with sputtering time. A statistics-of-mixtures model was used to deconvolute how silicon and graphite interacted during the formation of these species and how the interaction changed with depth.

25 ENERGY STORAGE↗