Engineering Papers⌕ Search

Engineering topics

Bishop, Joseph E.

Publications and source records attributed to Bishop, Joseph E..

5 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Stress-hybrid virtual element method on six-noded triangular meshes for compressible and nearly-incompressible linear elasticity

In this paper, we present a first-order Stress-Hybrid Virtual Element Method (SH-VEM) on six-noded triangular meshes for linear plane elasticity. Here, we adopt the Hellinger–Reissner variational principle to construct a weak equilibrium condition and a stress based projection operator. In each element, the stress projection operator is expressed in terms of the nodal displacements, which leads to a displacement based formulation. This stress-hybrid approach assumes a globally continuous displacement field while the stress field is discontinuous across each element. The stress field is initially represented by divergence-free tensor polynomials based on Airy stress functions, but we also present a formulation that uses a penalty term to enforce the element equilibrium conditions, referred to as the Penalty Stress-Hybrid Virtual Element Method (PSH-VEM). Numerical results are presented for PSH-VEM and SH-VEM, and we compare their convergence to the composite triangle FEM and B-bar VEM on benchmark problems in linear elasticity. The SH-VEM converges optimally in the L 2 norm of the displacement, energy seminorm, and the L 2 norm of hydrostatic stress. Furthermore, the results reveal that PSH-VEM converges in most cases at a faster rate than the expected optimal rate, but it requires the selection of a suitably chosen penalty parameter.

42 ENGINEERING↗
DOE OSTI2024

A quasi-meshfree method for constructing boundary-aware reproducing bases on geometrically complex domains using manifold geodesics

In many applications, physical domains are geometrically complex making it challenging to perform coarse-scale approximation. A defeaturing process is often used to simplify the domain in preparation for approximation and analysis at the coarse scale. In this paper, a methodology is presented for constructing a coarse-scale reproducing basis on geometrically complex domains given an initial fine-scale mesh of the fully featured domain. The initial fine-scale mesh can be of poor quality and extremely refined. The construction of the basis functions begins with a coarse-scale covering of the domain and generation of weighting functions with local support. Manifold geodesics are used to define distances within the local support for general applicability to non-convex domains. Conventional moving least squares is used to construct the coarse-scale reproducing basis. Applications in quasi-interpolation and linear elasticity are presented.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

11-th order of accuracy for numerical solution of 3-D Poisson equation with irregular interfaces on unfitted Cartesian meshes

For the first time the optimal local truncation error method (OLTEM) with 125-point stencils and unfitted Cartesian meshes has been developed in the general 3-D case for the Poisson equation for heterogeneous materials with smooth irregular interfaces. The 125-point stencils equations that are similar to those for quadratic finite elements are used for OLTEM. The interface conditions for OLTEM are imposed as constraints at a small number of interface points and do not require the introduction of additional unknowns, i.e., the sparse structure of global discrete equations of OLTEM is the same for homogeneous and heterogeneous materials. The stencils coefficients of OLTEM are calculated by the minimization of the local truncation error of the stencil equations. These derivations include the use of the Poisson equation for the relationship between the different spatial derivatives. Such a procedure provides the maximum possible accuracy of the discrete equations of OLTEM. In contrast to known numerical techniques with quadratic elements and third order of accuracy on conforming and unfitted meshes, OLTEM with the 125-point stencils provides 11-th order of accuracy, i.e., an extremely large increase in accuracy by 8 orders for similar stencils. The numerical results show that OLTEM yields much more accurate results than high-order finite elements with much wider stencils. The increased numerical accuracy of OLTEM leads to an extremely large increase in computational efficiency. Additionally, a new post-processing procedure with the 125-point stencil has been developed for the calculation of the spatial derivatives of the primary function. The post-processing procedure includes the minimization of the local truncation error and the use of the Poisson equation. It is demonstrated that the use of the partial differential equation (PDE) for the 125-point stencils improves the accuracy of the spatial derivatives by 6 orders compared to post-processing without the use of PDE as in existing numerical techniques. At an accuracy of 0.1% for the spatial derivatives, OLTEM reduces the number of degrees of freedom by 900 - 4∙10 6 times compared to quadratic finite elements. The developed post-processing procedure can be easily extended to unstructured meshes and can be independently used with existing post-processing techniques (e.g., with finite elements).

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Computationally optimized and manufactured acoustic metamaterials

A method, system, and apparatus for fabricating an acoustic metamaterial is provided. In an embodiment, a method for fabricating an acoustic metamaterial includes determining at least one tuned physical property for each of a plurality of micro-resonators according to a desired acoustic property of the acoustic metamaterial. For a particular physical property, a value of the tuned physical property for at least one of the plurality of micro-resonators is different from a value of the tuned physical property for at least one other of the plurality of micro-resonators. The method also includes additively forming the acoustic metamaterial such that the acoustic metamaterial comprises a first structure and the plurality of micro-resonators embedded within the first structure. Forming the acoustic metamaterial is performed such that an actual physical property of each of the plurality of micro-resonators is equal to a corresponding tuned physical property for each of the plurality of micro-resonators.

Walsh, Timothy F.↗