Engineering topics

Biezad, Daniel J.

Publications and source records attributed to Biezad, Daniel J..

16 records

NASA NTRS1997

CONDUIT: A New Multidisciplinary Integration Environment for Flight Control Development

A state-of-the-art computational facility for aircraft flight control design, evaluation, and integration called CONDUIT (Control Designer's Unified Interface) has been developed. This paper describes the CONDUIT tool and case study applications to complex rotary- and fixed-wing fly-by-wire flight control problems. Control system analysis and design optimization methods are presented, including definition of design specifications and system models within CONDUIT, and the multi-objective function optimization (CONSOL-OPTCAD) used to tune the selected design parameters. Design examples are based on flight test programs for which extensive data are available for validation. CONDUIT is used to analyze baseline control laws against pertinent military handling qualities and control system specifications. In both case studies, CONDUIT successfully exploits trade-offs between forward loop and feedback dynamics to significantly improve the expected handling, qualities and minimize the required actuator authority. The CONDUIT system provides a new environment for integrated control system analysis and design, and has potential for significantly reducing the time and cost of control system flight test optimization.

Tischler, Mark B.↗

NASA NTRS1996

Rapid Assessment of Agility for Conceptual Design Synthesis

This project consists of designing and implementing a real-time graphical interface for a workstation-based flight simulator. It is capable of creating a three-dimensional out-the-window scene of the aircraft's flying environment, with extensive information about the aircraft's state displayed in the form of a heads-up-display (HUD) overlay. The code, written in the C programming language, makes calls to Silicon Graphics' Graphics Library (GL) to draw the graphics primitives. Included in this report is a detailed description of the capabilities of the code, including graphical examples, as well as a printout of the code itself

Biezad, Daniel J.↗

NASA NTRS1996

Webpress: An Internet Outreach from NASA Dryden

The Technology and Commercialization Office at NASA DRyden has developed many educational outreach programs for K-12 educators. This project concentrates on the internet portion of that effort, specifically focusing on the development of an internet tool for educators called Webpress. This tool will not only provide a user-friendly access to aeronautical topics and interesting individuals on the world wide web (web), but will also enable teachers to rapidly submit and display their own materials and links for use in the classroom.

Biezad, Daniel J.↗

NASA NTRS1996

Controls design with crossfeeds for hovering rotorcraft using quantitative feedback theory

A multi-input, multi-output controls design with dynamic crossfeed pre-compensation is presented for rotorcraft in near-hovering flight using Quantitative Feedback Theory (QFT). The resulting closed-loop control system bandwidth allows the rotorcraft to be considered for use as an inflight simulator. The use of dynamic, robust crossfeeds prior to the QFT design reduces the magnitude of required feedback gain and results in performance that meets most handling qualities specifications relative to the decoupling of off-axis responses. Handling qualities are Level 1 for both low-gain tasks and high-gain tasks in the roll, pitch, and yaw axes except for the 10 deg/sec moderate-amplitude yaw command where the rotorcraft exhibits Level 2 handling qualities in the yaw axis caused by phase lag. The combined effect of the QFT feedback design following the implementation of low-order, dynamic crossfeed compensators successfully decouples ten of twelve off-axis channels. For the other two channels it was not possible to find a single, low-order crossfeed that was effective. This is an area to be investigated in future research.

Tischler, Mark B.↗

NASA NTRS1996

Designing Low Bandwidth Propulsive-Only Flight Controllers

Results from an investigation of using engine commands to control flight attitude are described. In-flight operation with simulated failed flight controls is reviewed and ground simulations of piloted propulsive-only control to touchdown are analyzed. A design of an optimal control law to assist the pilot is presented. Recommendations are made for more robust design and implementation. Results to date indicate that simply and effective augmented control can be achieved in a wide variety of failed configurations.

Biezad, Daniel J.↗

NASA NTRS1996

Pilot-in-the-Loop Analysis of Propulsive-Only Flight Control Systems

Longitudinal control system architectures are presented which directly couple flight stick motions to throttle commands for a multi-engine aircraft. This coupling enables positive attitude control with complete failure of the flight control system. The architectures chosen vary from simple feedback gains to classical lead-lag compensators with and without prefilters. Each architecture is reviewed for its appropriateness for piloted flight. The control systems are then analyzed with pilot-in-the-loop metrics related to bandwidth required for landing. Results indicate that current and proposed bandwidth requirements should be modified for throttles only flight control. Pilot ratings consistently showed better ratings than predicted by analysis. Recommendations are made for more robust design and implementation. The use of Quantitative Feedback Theory for compensator design is discussed. Although simple and effective augmented control can be achieved in a wide variety of failed configurations, a few configuration characteristics are dominant for pilot-in-the-loop control. These characteristics will be tested in a simulator study involving failed flight controls for a multi-engine aircraft.

Chou, Hwei-Lan↗

NASA NTRS1996

Application of QFT to the Problem of Failed In-Flight Controllers During Approach and Landing of a B720 Aircraft

Previous studies by NASA Dryden have shown the use of throttles for emergency flight control to be extremely difficult, especially for landing. Flight control using only the throttles to achieve safe landing for a large jet transport airplane, the Boeing 720, is investigated using Quantitative Feedback Theory (QFT). Results are compared to an augmented control developed in a previous study. The controller corrected unsatisfactory open-loop characteristics by increasing system bandwidth and damping, but improving the control bandwidth substantially proved very difficult. The pitch controller is robust in conditions of no or moderate turbulence. The roll controller performed well in conditions of no turbulence, but is sensitive to moderate turbulence. Handling qualities of the augmented control for approach and landing were evaluated by piloted simulation flights.

Chou, Hwei-Lan↗

NASA NTRS1994

Controls design with crossfeeds for hovering rotorcraft using quantitative feedback theory

This work is extending the research accomplished on project NCC2-751. A newly implemented helicopter model has been used to simulate 25 flight configurations near hover for the UH-60 RASCAL aircraft. A new engine model has been installed in the FORECAST simulation (alias UMGENHEL) for the better prediction of the yaw and heave responses. By applying the decoupling metric from project NCC 751 it was determined that the aileron to pitch and the elevator to yaw responses do not indicate the need for crossfeeds since both of them have a decoupling metric value over 20 dB (less than 10 percent coupling). In the case of the aileron to heave and the elevator to heave responses, the large size and the overlapping of the templates indicate that a low-order dynamic crossfeed cannot be found. The low-order dynamic crossfeed selection is proceeding, however, for the remaining eight crossfeeds. Note that most of them have successfully decoupled the system by 20 dB or more, except for the rudder to heave crossfeed (18.2 dB). It is probable that the engine model needs more accuracy to further improve the heave to yaw crossfeed decoupling metric value. To see how the new low-order dynamic crossfeeds perform, a simulation was accomplished using MATLAB SIMULINK.

Biezad, Daniel J.↗

NASA NTRS1994

Modification of ACSYNT aircraft computer program for preliminary design

This paper presents the development of a computer simulation of agility flight test techniques. Its purpose is to evaluate the agility of aircraft configurations early in the preliminary design phase. The simulation module is integrated into the NASA Ames aircraft synthesis design code. Trade studies using the agility module embedded within the design code to simulate the combat cycle time agility metric are illustrated using a Northrop F-20 aircraft model. Results show that the agility module is effective in analyzing the influence of common parameters such as thrust-to-weight ratio and wing loading on agility criteria. The module can also compare the agility potential between different configurations and has the capability to optimize agility performance early in the design process.

Biezad, Daniel J.↗

NASA NTRS1994

Developing a workstation-based, real-time simulation for rapid handling qualities evaluations during design

This paper describes the Rapid Aircraft DynamIcs AssessmeNt (RADIAN) project - an integration of the Aircraft SYNThesis (ACSTNT) design code with the USAD DATCOM code that estimates stability derivatives. Both of these codes are available to universities. These programs are then linked to flight simulation and flight controller synthesis tools and resulting design is evaluated on a graphics workstation. The entire process reduces the preliminary design time by an order of magnitude and provides an initial handling qualities evaluation of the design coupled to a control law. The integrated design process is applicable to both conventional aircraft taken from current textbooks and to unconventional designs emphasizing agility and propulsive control of attitude. The interactive and concurrent nature of the design process has been well received by industry and by design engineers at NASA. The process is being implemented into the design curriculum and is being used by students who view it as a significant advance over prior methods.

Anderson, Frederick↗

NASA NTRS1993

Low bandwidth robust controllers for flight

Through throttle manipulations, engine thrust can be used for emergency flight control for multi-engine aircraft. Previous study by NASA Dryden has shown the use of throttles for emergency flight control to be very difficult. In general, manual fly-by-throttle is extremely difficult - with landing almost impossible, but control augmentation makes runway landings feasible. Flight path control using throttles-only to achieve safe emergency landing for a large jet transport airplane, Boeing 720, was investigated using Quantitative Feedback Theory (QFT). Results were compared to an augmented control developed in a previous simulation study. The control augmentation corrected the unsatisfactory open-loop characteristics by increasing system bandwidth and damping, but increasing the control bandwidth substantially proved very difficult. The augmented pitch control is robust under no or moderate turbulence. The augmented roll control is sensitive to configuration changes.

Biezad, Daniel J.↗

NASA NTRS1993

Low Bandwidth Robust Controllers for Flight

Biezad, Daniel J.↗

NASA NTRS1992

Low bandwidth robust controllers for flight

During the final reporting period (Jun. - Dec. 1992), analyses of the longitudinal and lateral flying qualities were made for propulsive-only flight control (POFC) of a Boeing 720 aircraft model. Performance resulting from compensators developed using Quantitative Feedback Theory (QFT) is documented and analyzed. This report is a first draft of a thesis to be presented by graduate student Hwei-Lan Chou. The final thesis will be presented to NASA when it is completed later this year. The latest landing metrics related to bandwidth criteria and based on the Neal-Smith approach to flying qualities prediction were used in developing performance criteria for the controllers. The compensator designs were tested on the NASA simulator and exhibited adequate performance for piloted flight. There was no significant impact of QFT on performance of the propulsive-only flight controllers in either the longitudinal or lateral modes of flight. This was attributed to the physical limits of thrust available and the engine rate of response, both of whiih severely limited the available bandwidth of the closed-loop system.

Biezad, Daniel J.↗

NASA NTRS1992

Pilot-in-the-loop analysis of propulsive-only flight control systems

Longitudinal control system architectures which directly couple flight stick motions to throttle commands for a multi-engine aircraft are presented. This coupling enables positive attitude control with complete failure of the flight control system. The architectures chosen vary from simple feedback gains to classical lead-lag compensators with and without prefilters. Each architecture is reviewed for its appropriateness for piloted flight. The control systems are then analyzed with pilot-in-the-loop metrics related to bandwidth required for landing. Results indicate that current and proposed bandwidth requirements should be modified for throttles-only flight control. Pilot ratings consistently showed better ratings than predicted by analysis. Recommendations are made for more robust design and implementation. The use of quantitative feedback theory for compensator design is discussed. Although simple and effective augmented control can be achieved in a wide variety of failed configurations, a few configuration characteristics are dominant for pilot-in-the-loop control.

Chou, Hwei-Lan↗

NASA NTRS1991

Designing low bandwidth propulsive-only flight controllers

Results from an investigation of using engine commands to control flight attitude are described. In-flight operation with simulated failed flight controls is reviewed and ground simulations of piloted propulsive-only control to touchdown are analyzed. A design of an optimal control law to assist the pilot is presented. Recommendations are made for more robust design and implementation. Results to date indicate that simple and effective augmented control can be achieved in a wide variety of failed configurations.

Biezad, Daniel J.↗

NASA NTRS1987

Development of a facility using robotics for testing automation of inertial instruments

The Integrated Robotics System Simulation (ROBSIM) was used to evaluate the performance of the PUMA 560 arm as applied to testing of inertial sensors. Results of this effort were used in the design and development of a feasibility test environment using a PUMA 560 arm. The implemented facility demonstrated the ability to perform conventional static inertial instrument tests (rotation and tumble). The facility included an efficient data acquisitions capability along with a precision test servomechanism function resulting in various data presentations which are included in the paper. Analysis of inertial instrument testing accuracy, repeatability and noise characteristics are provided for the PUMA 560 as well as for other possible commercial arm configurations. Another integral aspect of the effort was an in-depth economic analysis and comparison of robot arm testing versus use of contemporary precision test equipment.

Greig, Joy Y.↗