Engineering topics

Betzina, M. D.

Publications and source records attributed to Betzina, M. D..

11 records

NASA NTRS1986

Full-scale tilt-rotor hover performance

The hover performance of three full-scale rotors was measured at the Ames Outdoor Aerodynamic Research Facility. The rotors, all designed for tilt-rotor aircraft, were the original metal blades for the XV-15 Tilt Rotor Research Aircraft, a set of composite, advanced technology blades for the XV-15, and a 0.658-scale model of the proposed V-22A Osprey (JVX) rotor. The composite advanced technology blades for the XV-15 were tested with several alternate blade root and blade tip configurations. This paper presents the performance of these three rotors, shows the effects of tip Mach number and root and tip configuration changes on rotor performance, and presents data on rotor wake velocity distributions and tip vortex geometry. Measured rotor performance is compared with theoretical predictions, and the discrepancies are discussed.

Felker, F. F.↗

NASA NTRS1985

Performance and loads data from a hover test of a full-scale XV-15 rotor

A hover test of a full-scale XV-15 rotor was conducted at the Outdoor Aerodynamic Research Facility at Ames Research Center. The primary objective of the test was to obtain accurate measurements of the hover performance of the original, metal-blade XV-15 rotor system. Data were acquired for rotor tip Mach numbers ranging from 0.60 to 0.73. This report presents data on rotor performance, rotor wake downwash velocities, and rotor loads.

Felker, F. F.↗

NASA NTRS1985

Rotor/body aerodynamic interactions

A wind tunnel investigation was conducted in which independent, steady state aerodynamic forces and moments were measured on a 2.24 m diam. two bladed helicopter rotor and on several different bodies. The mutual interaction effects for variations in velocity, thrust, tip-path-plane angle of attack, body angle of attack, rotor/body position, and body geometry were determined. The results show that the body longitudinal aerodynamic characteristics are significantly affected by the presence of a rotor and hub, and that the hub interference may be a major part of such interaction. The effects of the body on the rotor performance are presented.

Betzina, M. D.↗

NASA NTRS1984

A study of the aerodynamic interaction between a main rotor and a fuselage

The wake of a helicopter rotor can have a significant effect on a fuselage. Results from a recent wind-tunnel investigation show that certain fuselage characteristics, normalized by rotor thrust, scale proportionally to a rotor-wake-induced velocity parameter. Effects on the body of changes in velocity, thrust, tip-path-plane angle of attack, and rotor/body position are discussed. These results show that the rotor can have a favorable or unfavorable influence on the body, depending upon the operating condition.

Smith, C. A.↗

NASA NTRS1983

Rotor/body aerodynamic interactions

Betzina, M. D.↗

NASA NTRS1982

Aerodynamic interactions between a 1/6 scale helicopter rotor and a body of revolution

A wind-tunnel investigation was conducted in which independent, steady state aerodynamic forces and moments were measured on a 2.24-m-diam, two bladed helicopter rotor and a body of revolution. The objective was to determine the interaction of the body on the rotor performance and the effect of the rotor on the body aerodynamics for variations in velocity, thrust, tip-path-plane angle of attack, body angle of attack, rotor/body position, and body nose geometry. Results show that a body of revolution near the rotor can produce significant favorable or unfavorable effects on rotor performance, depending on the operating condition. Body longitudinal aerodynamic characteristics are significantly modified by the presence of an operating rotor and hub.

Betzina, M. D.↗

NASA NTRS1982

Aerodynamic interactions between a 1/6-scale helicopter rotor and a body of revolution

A wind-tunnel investigation was conducted in which independent, steady-state aerodynamic forces and moments were measured on a 2.24-m-diam, two-bladed helicopter rotor and a body of revolution. The objective was to determine the interaction of the body on the rotor performance and the effect of the rotor on the body aerodynamics for variations in velocity, thrust, tip-path-plane angle of attack, rotor/body position, and body nose geometry. Results show that a body of revolution near the rotor can produce significant favorable or unfavorable effects on rotor performance, depending on the operating condition. Body longitudinal aerodynamic characteristics are significantly modified by the presence of an operating rotor and hub.

Betzina, M. D.↗

NASA NTRS1979

Force and moment data from a wind-tunnel test of a tilt-nacelle V/STOL propulsion system with an attitude control vane

A large scale, tilt nacelle V/STOL propulsion system, with an attitude control vane assembly mounted in the exhaust, was tested. The effectiveness of the control vane as well as the aerodynamic characteristics of the entire propulsion system were determined. The results, in the form of tabulated coefficients, for both the vane forces and moments and the total forces and moments produced by the propulsion system are presented.

Betzina, M. D.↗

NASA NTRS1979

Aerodynamic effects of an attitude control vane on a tilt-nacelle V/STOL propulsion system

One possible technique for obtaining longitudinal control on a tilt-nacelle V/STOL aircraft is the use of a variable attitude vane assembly mounted in the propulsion system exhaust. Deflecting the vane produces large forces and moments without depending on forward speed of the aircraft. Tests are carried out in the Ames 40 by 80 ft wind tunnel on a large-scale tilt-nacelle V/STOL propulsion system with and without a variable attitude control vane assembly. Aerodynamic characteristics are analyzed in terms of nacelle aerodynamics, vane aerodynamics, and vane-induced effects on the nacelle aerodynamics. It is shown that the aerodynamic forces due to the nacelle without the vane can be a significant part of the total forces produced by the propulsion system. The control vane effectively produces large changes in pitching moment which are accompanied by significant changes in total lift and drag. The vane has a substantial effect on the propulsion-system aerodynamics. Other pertinent results are also given.

Betzina, M. D.↗

NASA NTRS1979

Aerodynamics of a tilt-nacelle V/STOL propulsion system

Tests were performed in the Ames 40 by 80 Foot Wind Tunnel on a large-scale, tilt-nacelle V/STOL propulsion system to determine its aerodynamic characteristics. Unpowered nacelle aerodynamics and power induced effects over an angle of attack range from 0 to 105 deg are presented. It is shown that: (1) the characteristics of the unpowered nacelle can be estimated with annular airfoil data, (2) the power-induced effects on the nacelle aerodynamics are significant, and (3) pitching moment can be correlated with lift and thrust.

Betzina, M. D.↗

NASA NTRS1976

Aerodynamic Characteristics of an A-4B Aircraft with Simulated and Actual Gunfire Damage to One Wing

The aerodynamic characteristics of a damaged McDonnell Douglas A-4B aircraft were studied in the Ames Research Center's 40- by 80-Foot Wind Tunnel. A standard fuselage and three different wings were used. The first wing tested was an undamaged one in which holes had been cut and detachable cover plates installed. Removal of one or more cover plates gave one of fourteen different simulated damage cases. The other two wings tested were damaged by actual gunfire at an Air Force range.

Betzina, M. D.↗