Engineering Papers⌕ Search

Engineering topics

Beresh, Steven J.

Publications and source records attributed to Beresh, Steven J..

At least 55 records · Page 3

Spatial distribution of pressure resonance in compressible cavity flow

The development of the unsteady pressure field on the floor of a rectangular cavity was studied at Mach 0.9 using high-frequency pressure-sensitive paint. Power spectral amplitudes at each cavity resonance exhibit a spatial distribution with a streamwise-oscillatory pattern; additional maxima and minima appear as the mode number is increased. This spatial distribution also appears in the propagation velocity of modal pressure disturbances. This behavior was tied to the superposition of a downstream-propagating shear-layer disturbance and an upstream-propagating acoustic wave of different amplitudes and convection velocities, consistent with the classical Rossiter model. The summation of these waves generates a net downstream-traveling wave whose amplitude and phase velocity are modulated by a fixed envelope within the cavity. This traveling-wave interpretation of the Rossiter model correctly predicts the instantaneous modal pressure behavior in the cavity. Here, subtle spanwise variations in the modal pressure behavior were also observed, which could be attributed to a shift in the resonance pattern as a result of spillage effects at the edges of the finite-width cavity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of the Fluctuating Velocity Field on the Surface Pressures in a Jet/Fin Interaction

The mechanism by which aerodynamic effects of jet/fin interaction arise from the flow structure of a jet in crossflow is explored using particle image velocimetry measurements of the crossplane velocity field as it impinges on a downstream fin instrumented with high-frequency pressure sensors. A Mach 3.7 jet issues into a Mach 0.8 crossflow from either a normal or inclined nozzle, and three lateral fin locations are tested. Conditional ensemble-averaged velocity fields are generated based upon the simultaneous pressure condition. Additional analysis relates instantaneous velocity vectors to pressure fluctuations. The pressure differential across the fin is driven by variations in the spanwise velocity component, which substitutes for the induced angle of attack on the fin. Pressure changes at the fin tip are strongly related to fluctuations in the streamwise velocity deficit, wherein lower pressure is associated with higher velocity and vice versa. The normal nozzle produces a counter-rotating vortex pair that passes above the fin, and pressure fluctuations are principally driven by the wall horseshoe vortex and the jet wake deficit. In conclusion, the inclined nozzle produces a vortex pair that impinges the fin and yields stronger pressure fluctuations driven more directly by turbulence originating from the jet mixing.

42 ENGINEERING↗

Pulse-Burst PIV of an Impulsively Started Cylinder in a Shock Tube for Re > 10 5

Here, the impulsive start of a circular cylinder in a shock tube was characterized with time-resolved particle image velocimetry measurements (TR-PIV) using a pulse-burst laser. Three Reynolds numbers Re of 1.07 × 10 5 , 1.63 × 10 5 and 2.46 × 10 5 were studied adding insight into the transient process in the vicinity of the drag crisis. One symmetric vortex pair was shed from the cylinder at the lower Reynolds number prior to the wake going asymmetric in a fashion analogous to studies at lower Re. At Re ≥ 1.63 × 10 5 , two or more symmetric vortex pairs occurred prior to asymmetry and the eventual transition to a von Kármán vortex street. The non-dimensional rise time for vortex shedding to begin, as quantified by wavelet analysis, was found to be lower at the two higher Re. Finally, the study indicates a transformation in the impulsive wake to occur at Re near the critical regime and may serve as a benchmark for high Re numerical solutions.

42 ENGINEERING↗