Engineering Papers⌕ Search

Engineering topics

Bellantoni, L

Publications and source records attributed to Bellantoni, L.

36 records · Page 2

Z(gamma) production and limits on anomalous ZZ(gamma) and Z(gamma gamma) couplings in p(p)over-bar collisions at root s 1.96 TeV

We present a measurement of p{bar p} {yields} Z{sub {gamma}} {yields} {ell}{sup +}{ell}{sup -}{sub {gamma}} ({ell} = e, {mu}) production with a data sample corresponding to an integrated luminosity of 6.2 fb{sup -1} collected by the D0 detector at the Fermilab Tevatron p{bar p} Collider. The results of the electron and muon channels are combined, and we measure the total production cross section and the differential cross section d{sigma}/dp{sub T}{sup {gamma}}, where p{sub T}{sup {gamma}} is the momentum of the photon in the plane transverse to the beam line. The results obtained are consistent with the standard model predictions from next-to-leading order use ttransverse momentum spectrum of the photon to place limits on anomalous ZZ{gamma} and Z{gamma}{gamma} couplings.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the CP-violating phase phi sJ/psi phi using the flavor-tagged decay Bs(0) -> J/psi phi in 8 fb(-1) of p(p)over-bar collisions

We report an updated measurement of the CP-violating phase, {phi}{sub s}{sup J/{psi}{phi}} and the decay-width difference for the two mass eigenstates, {Delta}{Gamma}{sub s}, from the flavor-tagged decay B{sub s}{sup 0} {yields} J/{psi}{phi}. The data sample corresponds to an integrated luminosity of 8.0 fb{sup -1} accumulated with the D0 detector using p{bar p} collisions at {radical}s = 1.96 TeV produced at the Fermilab Tevatron collider. The 68% Bayesian credibility intervals, including systematic uncertainties, are {Delta}{Gamma}{sub s} = 0.163{sub -0.064}{sup +0.065} ps{sup -1} and {phi}{sub s}{sup J}/{psi}{phi} = -0.55{sub -0.36}{sup +0.38}. The p-value for the Standard Model point is 29.8%.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for anomalous Wtb couplings in single top quark production in p(p)over-bar collisions at root s=1.96 TeV

We present new direct constraints on a general Wtb interaction using data corresponding to an integrated luminosity of 5.4 fb{sup -1} collected by the D0 detector at the Tevatron p{bar p} collider. The standard model provides a purely left-handed vector coupling at the Wtb vertex, while the most general, lowest dimension Lagrangian allows right-handed vector and left- or right-handed tensor couplings as well. We obtain precise limits on these anomalous couplings by comparing the data to the expectations from different assumptions on the Wtb coupling.

43 PARTICLE ACCELERATORS↗

Search for Higgs bosons decaying to tau(+)tau(-) pairs in p(p)over-bar collisions at root s=1.96 TeV

We present a search for the production of neutral Higgs bosons decaying into {tau}{sup +}{tau}{sup -} pairs in p{bar p} collisions at a center-of-mass energy of 1.96 TeV. The data, corresponding to an integrated luminosity of 5.4 fb{sup -1}, were collected by the D0 experiment at the Fermilab Tevatron Collider. We set upper limits at the 95% C.L. on the product of production cross section and branching ratio for a scalar resonance decaying into {tau}{sup +}{tau}{sup -} pairs, and we interpret these limits as limits on the production of Higgs bosons in the minimal supersymmetric standard model (MSSM) and as constraints in the MSSM parameter space.

43 PARTICLE ACCELERATORS↗

Forward-backward asymmetry in top quark-antiquark production

We present a measurement of forward-backward asymmetry in top quark-antiquark production in proton-antiproton collisions in the final state containing a lepton and at least four jets. Using a data set corresponding to an integrated luminosity of 5.4 fb{sup -1}, collected by the D0 experiment at the Fermilab Tevatron Collider, we measure the t{bar t} forward-backward asymmetry to be (9.2 {+-} 3.7)% at the reconstruction level. When corrected for detector acceptance and resolution, the asymmetry is found to be (19.6 {+-} 6.5)%. We also measure a corrected asymmetry based on the lepton from a top quark decay, found to be (15.2 {+-} 4.0)%. The results are compared to predictions based on the next-to-leading-order QCD generator mc@nlo. The sensitivity of the measured and predicted asymmetries to the modeling of gluon radiation is discussed.

43 PARTICLE ACCELERATORS↗

Model-independent measurement of t-channel single top quark production in p(p)over-bar collisions at,root s=1.96 TeV

We present a model-independent measurement of t-channel electroweak production of single top quarks in p{bar p} collisions at {radical}s = 1.96 TeV. Using 5.4 fb{sup -1} of integrated luminosity collected by the D0 detector at the Fermilab Tevatron Collider, and selecting events containing an isolated electron or muon, missing transverse energy and one or two jets originating from the fragmentation of b quarks, we measure a cross section {sigma}(p{bar p} {yields} tqb + X) = 2.90 {+-} 0.59 (stat + syst) pb for a top quark mass of 172.5 GeV. The probability of the background to fluctuate and produce a signal as large as the one observed is 1.6 x 10{sup -8}, corresponding to a significance of 5.5 standard deviations.

43 PARTICLE ACCELERATORS↗

Crab Cavities for Linear Colliders

Crab cavities have been proposed for a wide number of accelerators and interest in crab cavities has recently increased after the successful operation of a pair of crab cavities in KEK-B. In particular crab cavities are required for both the ILC and CLIC linear colliders for bunch alignment. Consideration of bunch structure and size constraints favour a 3.9 GHz superconducting, multi-cell cavity as the solution for ILC, whilst bunch structure and beam-loading considerations suggest an X-band copper travelling wave structure for CLIC. These two cavity solutions are very different in design but share complex design issues. Phase stabilisation, beam loading, wakefields and mode damping are fundamental issues for these crab cavities. Requirements and potential design solutions will be discussed for both colliders.

43 PARTICLE ACCELERATORS↗

Copper Prototype Measurements of the HOM, LOM And SOM Couplers for the ILC Crab Cavity

The ILC Crab Cavity is positioned close to the IP and delivered luminosity is very sensitive to the wakefields induced in it by the beam. A set of couplers were designed to couple to and damp the spurious modes of the crab cavity. As the crab cavity operates using a dipole mode, it has different damping requirements from an accelerating cavity. A separate coupler is required for the monopole modes below the operating frequency of 3.9 GHz (known as the LOMs), the opposite polarization of the operating mode (the SOM), and the modes above the operating frequency (the HOMs). Prototypes of each of these couplers have been manufactured out of copper and measured attached to an aluminum nine cell prototype of the cavity and their external Q factors were measured. The results were found to agree well with numerical simulations.

43 PARTICLE ACCELERATORS↗

Status of the ILC Crab Cavity Development

The International Linear Collider (ILC) will require two dipole cavities to 'crab' the electron and positron bunches prior to their collision. It is proposed to use two 9 cell SCRF dipole cavities operating at a frequency of 3.9 GHz, with a transverse gradient of 3.8MV/m in order to provide the required transverse kick. Extensive numerical modelling of this cavity and its couplers has been performed. Aluminium prototypes have been manufactured and tested to measure the RF properties of the cavity and couplers. In addition single cell niobium prototypes have been manufactured and tested in a vertical cryostat. The International Collider (ILC) [1] collides bunches of electrons and positrons at a crossing angle of 14 mrad. The angle between these bunches causes a loss in luminosity due to geometric effects [2]. The luminosity lost from this geometric effect can be recovered by rotating the bunches into alignment prior to collision. One possible method of rotating the bunches is to use a crab cavity [3]. A crab cavity is a transverse defecting cavity, where the phase of the cavity is such that the head and tail of the bunch receive equal and opposite kicks. As the bunches are only 500 nm wide in the horizontal plane, the cavity phase must be strictly controlled to avoid the bunch centre being deflected too much. In order to keep the phase stability within the required limits it is required that the cavity be superconducting to avoid thermal effects in both the cavity and its RF source. At the location of the crab cavity in the ILC there is only 23 cm separation between the centre of the cavity and the extraction line, hence the cavity must be small enough to fit in this space. This, along with the difficulty of making high frequency SRF components, set the frequency of the cavity to 3.9 GHz.

43 PARTICLE ACCELERATORS↗

Precise Measurements of Direct CP Violation, CPT Symmetry, and Other Parameters in the Neutral Kaon System

The authors present precise tests of CP and CPT symmetry based on the full dataset of K {yields} {pi}{pi} decays collected by the KTeV experiment at Fermi National Accelerator Laboratory during 1996, 1997, and 1999. this dataset contains 16 million K {yields} {pi}{sup 0}{pi}{sup 0} and 69 million K {yields} {pi}{sup +}{pi}{sup -} decays. They measure the direct CP violation parameter Re({epsilon}{prime}/{epsilon}) = (19.2 {+-} 2.1) x 10{sup -4}. They find the K{sub L}-K{sub S} mass difference {Delta}m = (5270 {+-} 12) x 10{sup 6} {h_bar}s{sup -1} and the K{sub S} lifetime {tau}{sub S} = (89.62 {+-} 0.05) x 10{sup -12} s. They also measure several parameters that test CPT invariance. They find the difference between the phase of the indirect CP violation parameter, {epsilon}, and the superweak phase, {phi}{sub {epsilon}} - {phi}{sub SW} = (0.40 {+-} 0.56){sup o}. They measure the difference of the relative phases between the CP violating and CP conserving decay amplitudes for K {yields} {pi}{sup +}{pi}{sup -} ({phi}{sub +-}) and for K {yields} {pi}{sup 0}{pi}{sup 0} ({phi}{sub 00}), {Delta}{phi} = (0.30 {+-} 0.35){sup o}. From these phase measurements, they place a limit on the mass difference between K{sup 0} and {bar K}{sup 0}, {Delta}M < 4.8 x 10{sup -19} GeV/c{sup 2} at 95% C.L. These results are consistent with those of other experiments, their own earlier measurements, and CPT symmetry.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Dispersive analysis of K_{L mu3} and K_{L e3} scalar and vector form factors using KTeV data

Using the published KTeV samples of K{sub L} {yields} {pi}{sup {+-}}e{sup {-+}}{nu} and K{sub L} {yields} {pi}{sup {+-}}{mu}{sup {-+}}{nu} decays, we perform a reanalysis of the scalar and vector form factors based on the dispersive parameterization. We obtain phase space integrals I{sub K}{sup e} = 0.15446 {+-} 0.00025 and I{sub K}{sup {mu}} = 0.10219 {+-} 0.00025. For the scalar form factor parameterization, the only free parameter is the normalized form factor value at the Callan-Treiman point (C); our best fit results in ln C = 0.1915 {+-} 0.0122. We also study the sensitivity of C to different parametrizations of the vector form factor. The results for the phase space integrals and C are then used to make tests of the Standard Model. Finally, we compare our results with lattice QCD calculations of F{sub K}/F{sub {pi}} and f{sub +}(0).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Beyond Standard Model Physics

There are many recent results from searches for fundamental new physics using the TeVatron, the SLAC b-factory and HERA. This talk quickly reviewed searches for pair-produced stop, for gauge-mediated SUSY breaking, for Higgs bosons in the MSSM and NMSSM models, for leptoquarks, and v-hadrons. There is a SUSY model which accommodates the recent astrophysical experimental results that suggest that dark matter annihilation is occurring in the center of our galaxy, and a relevant experimental result. Finally, model-independent searches at D0, CDF, and H1 are discussed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Validation of Broadly Filtered Diagonalization Method for Extracting Frequencies and Modes from High-Performance Computations

Recent developments have shown that one can get around the difficulties of finding the eigenvalues and eigenmodes of the large systems studied with high performance computation by using broadly filtered diagonalization [G. R. Werner and J. R. Cary, J. Compo Phys. 227, 5200 (2008)]. This method can be used in conjunction with any time-domain computation, in particular those that scale very well up to 10000s of processors and beyond. Here we present results that show that this method accurately obtains both modes and frequencies of electromagnetic cavities, even when frequencies are nearly degenerate. The application was to a well-characterized Kaon separator cavity, the A15. The computations are shown to have a precision to a few parts in 10{sup 5}. Because the computed frequency differed from the measured frequency by more than this amount, a careful validation study to determine all sources of difference was undertaken. Ultimately, more precise measurements of the cavity showed that the computations were correct, with remaining differences accounted for by uncertainties in cavity dimensions and atmospheric and thermal conditions. Thus, not only was the method validated, but it was shown to have the ability to predict differences in cavity dimensions from fabrication specifications.

99 GENERAL AND MISCELLANEOUS↗

Highly Accurate Frequency Calculations of Crab Cavities Using the VORPAL Computational Framework

We have applied the Werner-Cary method [J. Comp. Phys. 227, 5200-5214 (2008)] for extracting modes and mode frequencies from time-domain simulations of crab cavities, as are needed for the ILC and the beam delivery system of the LHC. This method for frequency extraction relies on a small number of simulations, and post-processing using the SVD algorithm with Tikhonov regularization. The time-domain simulations were carried out using the VORPAL computational framework, which is based on the eminently scalable finite-difference time-domain algorithm. A validation study was performed on an aluminum model of the 3.9 GHz RF separators built originally at Fermi National Accelerator Laboratory in the US. Comparisons with measurements of the A15 cavity show that this method can provide accuracy to within 0.01% of experimental results after accounting for manufacturing imperfections. To capture the near degeneracies two simulations, requiring in total a few hours on 600 processors were employed. This method has applications across many areas including obtaining MHD spectra from time-domain simulations.

43 PARTICLE ACCELERATORS↗

Design and Optimization of Large Accelerator Systems through High-Fidelity Electromagnetic Simulations

SciDAC1, with its support for the 'Advanced Computing for 21st Century Accelerator Science and Technology' (AST) project, witnessed dramatic advances in electromagnetic (EM) simulations for the design and optimization of important accelerators across the Office of Science. In SciDAC2, EM simulations continue to play an important role in the 'Community Petascale Project for Accelerator Science and Simulation' (ComPASS), through close collaborations with SciDAC CETs/Institutes in computational science. Existing codes will be improved and new multi-physics tools will be developed to model large accelerator systems with unprecedented realism and high accuracy using computing resources at petascale. These tools aim at targeting the most challenging problems facing the ComPASS project. Supported by advances in computational science research, they have been successfully applied to the International Linear Collider (ILC) and the Large Hadron Collider (LHC) in High Energy Physics (HEP), the JLab 12-GeV Upgrade in Nuclear Physics (NP), as well as the Spallation Neutron Source (SNS) and the Linac Coherent Light Source (LCLS) in Basic Energy Sciences (BES).

43 PARTICLE ACCELERATORS↗