Engineering topics

Bejczy, A. K.

Publications and source records attributed to Bejczy, A. K..

At least 55 records · Page 3

NASA NTRS1985

Robots as man-extension systems in space

The main topic of the paper is sensing and computer based automation and man-machine interface devices and techniques which permit task-level and 'intelligent' two-way communication between human operator and remote robot in earth orbit. General considerations are presented on control and information problems in teleoperation and on the characteristics of earth orbital teleoperation. Specific control and information display devices and techniques are discussed and exemplified with development results obtained at the Jet Propulsion Laboratory (JPL) in recent years.

Bejczy, A. K.↗

NASA NTRS1985

Recent advancements in telepresence technology development

This paper describes recent developments at JPL aimed at enhancing the operator's awareness of the remote task he or she is controlling in space teleoperation. The first development is related to the use of force-reflecting or bilateral manual control in weightless condition. The second development is related to integrated graphics displays of force and torque information originating from a remote robot hand. The third development is related to a distributed computational system in teleoperation organized in two groups: one integrated with a remote robot arm and hand, and another integrated with the control station. This computational system carries out interactive automation functions.

Corker, K.↗

NASA NTRS1984

Displaying Force and Torque of A Manipulator

Display combines bar charts, vector diagrams, and numerical values to inform operator of forces and torques exerted by end effector of manipulator. On voice or keyboard command, eight-channel strip-chart recorder traces force and torque components and claw position of raw measurements from eight strain gage sensors in end effector. Especially helpful when operator's view of end effector is obscured.

Bejczy, A. K.↗

NASA NTRS1984

The Effect of Part-simulation of Weightlessness on Human Control of Bilateral Teleoperation: Neuromotor Considerations

The effect of weightlessness on the human operator's performance in force reflecting position control of remote manipulators was investigated. A gravity compensation system was developed to simulate the effect of weightlessness on the operator's arm. A universal force reflecting hand controller (FRHC) and task simulation software were employed. Two experiments were performed because of anticipated disturbances in neuromotor control specification on the human operator in an orbital control environment to investigate: (1) the effect of controller stiffness on the attainment of a learned terminal position in the three dimensional controller space, and (2) the effect of controller stiffness and damping on force tracking of the contour of a simulated three dimensional cube using the part simulation of weightless conditions. The results support the extension of neuromotor control models, which postulate a stiffness balance encoding of terminal position, to three dimensional motion of a multilink system, confirm the existence of a disturbance in human manual control performance under gravity compensated conditions, and suggest techniques for compensation of weightlessness induced performance decrement through appropriate specification of hand controller response characteristics. These techniques are based on the human control model.

Corker, K.↗

NASA NTRS1984

Automation in teleoperation from a man-machine interface viewpoint

Teleoperation can be defined as the use of robotic devices having mobility, manipulative and some sensing capabilities, and remotely controlled by a human operator. The purpose of this paper is to discuss and exemplify technology issues related to the use of robots as man-extension or teleoperator systems in space. The main thrust of the paper is focused at research and development in the area of sensing- and computer-based automation from the viewpoint of man-machine interface devices and techniques. The objective of this R and D effort is to render space teleoperation efficient and safe through the use of devices and techniques which will permit integrated and task-level ('intelligent') two-way control communication between human operator and teleoperator machine in earth orbit.

Bejczy, A. K.↗

NASA NTRS1984

Generalized bilateral control of robot arms

This paper summarizes the theory of a new form of bilateral or force-reflecting manual control of remote robot (slave) arms. The mathematics of workspace representation, command structure, kinematic and dynamic control coordination required for implementing the new form of generalized bilateral control through computer programs is presented. The paper concludes with a brief description of implementation organization of the new system using a six-degree-of-freedom backdrivable hand controller, a PUMA 560 robot arm and a distributed net of microcomputers organized in two groups: one at the remote work site and one at the control station.

Bejczy, A. K.↗

NASA NTRS1983

Optical fiber tactile sensor

A tactile sensor comprises an array of cells which are covered by an elastic membrane, having an exposed surface which is adapted to come in contact with an object. Light is conducted to each cell from a light source by an optical fiber which terminates at the cell. Reflected light from the cell is conducted by an optical fiber to a light processor, which senses changes in the light received thereby from an ambient level whenever an object comes in contact with the membrane surface above the cell.

Bejczy, A. K.↗

NASA NTRS1983

Improving Control of Remote Manipulators

Advanced theoretical and experimental developments in field of remote manipulators discussed in conference preprint. Report synthesizes number of sensing and control techniques.

Bejczy, A. K.↗

NASA NTRS1983

Remote Manipulator Has Relistic "Feel"

Computer aided remote manipulator does not transmit weight and inertia of its own joints and segments. Achieves load sensitivity by processing signals that move manipulator separately from those that apply reflective forces and torques on hand controller. Operator feels only load.

Bejczy, A. K.↗

NASA NTRS1983

Control of robot manipulators for handling and assembly in space

Long-range NASA planning includes construction and erection of large systems in space requiring automatic handling equipment, teleoperators, or robots under supervisory control. This paper investigates and explores some of the requirements for the control of teleoperated and autonomous space manipulators. The critical technology development areas are identified and discussed in the context of the developments at the Jet Propulsion Laboratory (JPL), and other places.

Heer, E.↗

NASA NTRS1983

Dynamic analysis for robot arm control

Explicit state equations provide detailed analytic insight into the dynamic behavior of a robot arm and facilitate the understanding of the control problem. The analytic strength of explicit state equations is exemplified for a given robot arm. In fact, for the quoted example, the explicit and exact state equations involve considerably less computation than the use of the known most efficient general-purpose computational algorithm for robot arm dynamics.

Bejczy, A. K.↗

NASA NTRS1983

Robot arm dynamic model reduction for control

General methods are described by which the mathematical complexities of explicit and exact state equations of robot arms can be reduced to a simplified and compact state equation representation without introducing significant errors into the robot arm dynamic model. The model reduction methods are based on homogeneous coordinates and on the Langrangian algorithm for robot arm dynamics, and utilize matrix, vector and numeric analysis techniques. The derivation of differential vector representation of centripetal and Coriolis forces which has not yet been established in the literature is presented.

Bejczy, A. K.↗

NASA NTRS1982

Touch Sensor Responds to Contact Pressure

Optical tactile sensor for mechanical hands senses contact pressure via change in light reflected from an elastic covering. Pressure against a cell cover causes distortion, which changes internal reflection of light. Change is sensed by detector, and output signal informs operator of contact. The greater the pressure and distortion, the greater the change in light reflection.

Bejczy, A. K.↗

NASA NTRS1982

Evaluation of SMART sensor displays for multidimensional precision control of Space Shuttle remote manipulator

An enhanced proximity sensor and display system was developed at the Jet Propulsion Laboratory (JPL) and tested on the full scale Space Shuttle Remote Manipulator at the Johnson Space Center (JSC) Manipulator Development Facility (MDF). The sensor system, integrated with a four-claw end effector, measures range error up to 6 inches, and pitch and yaw alignment errors within + or 15 deg., and displays error data on both graphic and numeric displays. The errors are referenced to the end effector control axes through appropriate data processing by a dedicated microcomputer acting on the sensor data in real time. Both display boxes contain a green lamp which indicates whether the combination of range, pitch and yaw errors will assure a successful grapple. More than 200 test runs were completed in early 1980 by three operators at JSC for grasping static and capturing slowly moving targets. The tests have indicated that the use of graphic/numeric displays of proximity sensor information improves precision control of grasp/capture range by more than a factor of two for both static and dynamic grapple conditions.

Bejczy, A. K.↗

NASA NTRS1982

Distribution of man-machine controls in space teleoperation

The distribution of control between man and machine is dependent on the tasks, available technology, human performance characteristics and control goals. This dependency has very specific projections on systems designed for teleoperation in space. This paper gives a brief outline of the space-related issues and presents the results of advanced teleoperator research and development at the Jet Propulsion Laboratory (JPL). The research and development work includes smart sensors, flexible computer controls and intelligent man-machine interface devices in the area of visual displays and kinesthetic man-machine coupling in remote control of manipulators. Some of the development results have been tested at the Johnson Space Center (JSC) using the simulated full-scale Shuttle Remote Manipulator System (RMS). The research and development work for advanced space teleoperation is far from complete and poses many interdisciplinary challenges.

Bejczy, A. K.↗

NASA NTRS1981

Experimental results with a six-degree-of-freedom force-reflecting hand controller

Control experiments performed using an isotonic joystick connected to a six degree-of-freedom manipulator equipped with a six dimensional force-torque sensor at the base of the manipulator end effector are described. The preliminary control experiments were aimed at the investigation of the human operators' ability to command and control forces in different directions by varying the information conditions and the values of the feedforward and feedback command gains in the bilateral control loop. The main conclusions are: (1) a quantified graphic display of force-torque information can considerably enhance the operator's ability to perform a quantitatively sharp force-torque control, and (2) there seems to be a task dependent optimal combination of the feedforward and feedback command gain values which provide a dynamically smooth and stable bilateral control performance.

Bejczy, A. K.↗

NASA NTRS1981

Voice control of the space shuttle video system

A pilot voice control system developed at the Jet Propulsion Laboratory (JPL) to test and evaluate the feasibility of controlling the shuttle TV cameras and monitors by voice commands utilizes a commercially available discrete word speech recognizer which can be trained to the individual utterances of each operator. Successful ground tests were conducted using a simulated full-scale space shuttle manipulator. The test configuration involved the berthing, maneuvering and deploying a simulated science payload in the shuttle bay. The handling task typically required 15 to 20 minutes and 60 to 80 commands to 4 TV cameras and 2 TV monitors. The best test runs show 96 to 100 percent voice recognition accuracy.

Bejczy, A. K.↗

NASA NTRS1981

Terminal guidance sensor system

A system is described for guiding a claw to the proper distance and into the proper orientation in yaw and pitch, to engage a grappling fixture. The system includes four proximity sensors on the claw, that are arranged at corners of an imaginary square, which sense the distance to the top surface of the grappling fixture. If a pair of sensors at opposite corners of the square sense a different distance to the top surface of the grappling fixture, then it is known that the claw is rotated about a corresponding axis with respect to the plane of the grappling fixture.

Bejczy, A. K.↗