Engineering Papers⌕ Search

Engineering topics

Behera, P.

Publications and source records attributed to Behera, P..

11 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Measurement of branching-fraction ratios and CP asymmetries in B± → DCP±K± decays at Belle and Belle II

Abstract We report results from a study ofB ± → DK ± decays followed byDdecaying to theCP-even final stateK + K − and CP-odd final state$$ {K}_S^0{\pi}^0 $$ K S 0 π 0 , whereDis an admixture ofD 0 and$$ {\overline{D}}^0 $$ D ¯ 0 states. These decays are sensitive to the Cabibbo-Kobayashi-Maskawa unitarity-triangle angleϕ 3 . The results are based on a combined analysis of the final data set of 772×10 6 $$ B\overline{B} $$ B B ¯ pairs collected by the Belle experiment and a data set of 198×10 6 $$ B\overline{B} $$ B B ¯ pairs collected by the Belle II experiment, both in electron-positron collisions at the Υ(4S) resonance. We measure the CP asymmetries to be$$ \mathcal{A} $$ A CP+ = (+12.5±5.8±1.4)% and$$ \mathcal{A} $$ A CP− = (−16.7±5.7±0.6)%, and the ratios of branching fractions to be$$ \mathcal{R} $$ R CP+ = 1.164±0.081±0.036 and$$ \mathcal{R} $$ R CP− = 1.151±0.074±0.019. The first contribution to the uncertainties is statistical, and the second is systematic. The asymmetries$$ \mathcal{A} $$ A CP+ and$$ \mathcal{A} $$ A CP− have similar magnitudes and opposite signs; their difference corresponds to 3.5 standard deviations. From these values we calculate 68.3% confidence intervals of (8.5 ° <ϕ 3 < 16.5 ° ) or (84.5 ° <ϕ 3 < 95.5 ° ) or (163.3 ° <ϕ 3 < 171.5 ° ) and 0.321 B< 0.465.

Physics↗
DOE OSTI2024

Timing Performance of the CMS High Granularity Calorimeter Prototype

This paper describes the experience with the calibration,reconstruction and evaluation of the timing capabilities of the CMSHGCAL prototype in the beam tests in 2018. The calibrationprocedure includes multiple steps and corrections ranging from tensof nanoseconds to a few hundred picoseconds. The timing performanceis studied using signals from positron beam particles with energiesbetween 20 GeV and 300 GeV. The performance is studied as afunction of particle energy against an external timing reference aswell as standalone by comparing the two different halves of theprototype. The timing resolution is found to be 60 ps forsingle-channel measurements and better than 20 ps for full showersat the highest energies, setting excellent perspectives for theHGCAL calorimeter performance at the HL-LHC.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

Search for charged-lepton flavor violation in Υ(2S) → ℓ∓τ± (ℓ = e, μ) decays at Belle

Abstract We report a search for the charged-lepton flavor violation in Υ(2S) →ℓ ∓ τ ± (ℓ=e, μ) decays using a 25 fb −1 Υ(2S) sample collected by the Belle detector at the KEKBe + e − asymmetric-energy collider. We find no evidence for a signal and set upper limits on the branching fractions ($$ \mathcal{B} $$ B ) at 90% confidence level. We obtain the most stringent upper limits:$$ \mathcal{B} $$ B (Υ(2S)→ μ ∓ τ ± )<0.23×10 −6 and$$ \mathcal{B} $$ B (Υ(2S)→ e ∓ τ ± )<1.12×10 −6 .

Physics↗
DOE OSTI2023

Search for $ {\textrm{B}}_{\textrm{s}}^0 $ → ℓ ∓ τ ± with the semi-leptonic tagging method at Belle

We present a search for the lepton-flavor-violating decays ${B}_s^0$ → ℓ ∓ τ ± , where ℓ = e, μ, using the full data sample of 121 fb -1 collected at the Υ(5S) resonance with the Belle detector at the KEKB asymmetric-energy e + e - collider. We use ${B}_s^0{\overline{B}}_s^0$ events in which one ${B}_s^0$ meson is reconstructed in a semileptonic decay mode and the other in the signal mode. We find no evidence for (${B}_s^0$ → ℓ ∓ τ ± decays and set upper limits on their branching fractions at 90% confidence level as $\mathcal{B}$(${B}_s^0$ → e ∓ τ ± ) < 14 × 10 -4 and $\mathcal{B}$ (${B}_s^0$ → μ ∓ τ ± ) < 7.3 × 10 -4 . Our result represents the first upper limit on the ${B}_s^0$ → e ∓ τ ± decay rate.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Neutron irradiation and electrical characterisation of the first 8” silicon pad sensor prototypes for the CMS calorimeter endcap upgrade

As part of its HL-LHC upgrade program, the CMS collaboration is replacing its existing endcap calorimeters with a high-granularity calorimeter (CE). The new calorimeter is a sampling calorimeter with unprecedented transverse and longitudinal readout for both electromagnetic and hadronic compartments. Due to its compactness, intrinsic time resolution, and radiation hardness, silicon has been chosen as active material for the regions exposed to higher radiation levels. The silicon sensors are fabricated as 20 cm (8”) wide hexagonal wafers and are segmented into several hundred pads which are read out individually. As part of the sensor qualification strategy, 8” sensor irradiation with neutrons has been conducted at the Rhode Island Nuclear Science Center (RINSC) and followed by their electrical characterisation in 2020-21. The completion of this important milestone in the CE's R&D program is documented in this paper and it provides detailed account of the associated infrastructure and procedures.The results on the electrical properties of the irradiated CE silicon sensors are presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

Performance of the CMS High Granularity Calorimeter prototype to charged pion beams of 20–300 GeV/c

The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimeter (HGCAL). The electromagnetic section of the HGCAL is based on silicon sensors interspersed between lead and copper (or copper tungsten) absorbers. The hadronic section uses layers of stainless steel as an absorbing medium and silicon sensors as an active medium in the regions of high radiation exposure, and scintillator tiles directly read out by silicon photomultipliers in the remaining regions. As part of the development of the detector and its readout electronic components, a section of a silicon-based HGCAL prototype detector along with a section of the CALICE AHCAL prototype was exposed to muons, electrons and charged pions in beam test experiments at the H2 beamline at the CERN SPS in October 2018. The AHCAL uses the same technology as foreseen for the HGCAL but with much finer longitudinal segmentation. The performance of the calorimeters in terms of energy response and resolution, longitudinal and transverse shower profiles is studied using negatively charged pions, and is compared to GEANT4 predictions. This is the first report summarizing results of hadronic showers measured by the HGCAL prototype using beam test data.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

Search for lepton-flavor-violating τ decays into a lepton and a vector meson using the full Belle data sample

Charged-lepton-flavor-violation is predicted in several new physics scenarios. We update the analysis of τ lepton decays into a light charged lepton (ℓ = e ± or μ ± ) and a vector meson (V 0 = ρ 0 , Φ, ω, K *0 , or $\overline{K}$ *0 ) using 980 fb -1 of data collected with the Belle detector at the KEKB collider. No significant excess of such signal events is observed, and thus 90% credibility level upper limits are set on the τ → ℓV 0 branching fractions in the range of (1.7–4.3) × 10 -8 . These limits are improved by 30% on average from the previous results.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Two-particle angular correlations in e + e - collisions to hadronic final states in two reference coordinates at Belle

We present the analysis of two-particle angular correlations using coordinate systems defined with the conventional beam axis and the event thrust axis. We propose the latter as a good representation for the correlation structure interpretation in the e + e - collision system. The e + e - collisions to hadronic final states at center-of-mass energies of $\sqrt{s}$ = 10.52 GeV and 10.58 GeV are recorded by the Belle detector at KEKB. In this paper, results on the first dataset are supplementary to the previous Belle publication [1]. At the same time, the latter is the first two-particle correlation measurement at collision energy on the Υ(4S) resonance and is sensitive to its decay products. Measurements are reported as a function of the charged-particle multiplicity. Finally, a qualitative understanding of the correlation structure is discussed using a combination of Monte Carlo simulations and experimental data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Measurement of two-photon decay width of χ c2 (1 P ) in γγ → χ c2 (1 P ) → J/ψγ at Belle

We report the measurement of the two-photon decay width of χ c2 (1P) in two-photon processes at the Belle experiment. We analyze the process γγ → χ c2 (1P) → J/ψγ, J/ψ → ℓ + ℓ - (ℓ = e or μ) using a data sample of 971 fb -1 collected with the Belle detector at the KEKB e + e - collider. In this analysis, the product of the two-photon decay width of χ c2 (1P) and the branching fraction is determined to be ${\Gamma}_{\gamma \gamma}({\chi}_{c2}(1P))\mathcal{B}({\chi}_{c2}(1P)\to J/\psi \gamma) \mathcal{B} (J/\psi \to {\ell}^{+}{\ell}^{-})=$ 14.8 ± 0.3(stat.) ± 0.7(syst.) eV, which corresponds to Γ γγ (χ c2 (1P)) = 653 ± 13(stat.) ± 31(syst.) ± 17(B.R.) eV, where the third uncertainty is from $\mathcal{B}$ (χ c2 (1P) → J/ψγ) and $\mathcal{B}$ (J/ψ → ℓ + ℓ - ).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Evidence for the singly Cabibbo-suppressed decay Ω 0 c → Ξ¯π + and search for Ω 0 c → Ξ¯ K + and Ω¯K + decays at Belle

Using a data sample of 980 fb -1 collected with the Belle detector at the KEKB asymmetric-energy e + e - collider, we study for the first time the singly Cabibbo-suppressed decays Ω 0 c → Ξ¯π + and Ω¯K + and the doubly Cabibbo-suppressed decay Ω 0 c → Ξ¯ K + . Evidence for an Ω 0 c signal in the Ω 0 c → Ξ¯π + mode is reported with a significance of 4.5σ including systematic uncertainties.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗