Engineering topics
Beese, Allison M.
Publications and source records attributed to Beese, Allison M..
Simultaneous Optimization of Crystal Plasticity Hardening Parameters
Crystal plasticity models relate macroscopic deformation behavior to the evolution of slip systems strength, but their parameterization is often non-unique, with multiple parameter sets being able to describe the same macroscopic behavior. To address this issue, the present work adopts a Bayesian optimization framework for the parameterization of face-centered cubic plasticity models while simultaneously considering multiple experimental datasets from the literature. For single crystal Cu, parameter optimization was guided by the tensile stress–strain curves along several crystallographic orientations, with an adequate fit being found for five orientations at once. While additional parameters allowed for the consideration of more physical mechanisms, like different slip system interaction strengths or misorientations inherent to the experimental data, the extra dimensionality was found to limit the efficiency of the global minimization procedure. For polycrystalline Ni, multiple grain sizes were considered together in a representative polycrystalline model, with the optimization able to reconcile the model with the data for three grain sizes at once. As meaningful interpretation of parameters relies on the uniqueness of their values, incorporating multiple datasets into this discerning parameterization procedure enables more robust prediction and application of crystal plasticity models.
MaterialsMap: A CALPHAD-based tool to design composition pathways through feasibility map for desired dissimilar materials, demonstrated with resistance spot welding joining of Ag-Al-Cu
Assembly of dissimilar metals can be achieved by different methods, for example, casting, welding, and additive manufacturing (AM). However, undesired phases formed in liquid-phase assembling processes due to solute segregation during solidification diminish mechanical and other properties of the processed parts. In the present work, an open-source software named MaterialsMap, has been developed based on the CALculation of Phase Diagrams (CALPHAD) approach. The primary objective of MaterialsMap is to facilitate the design of an optimal composition pathway for assembling dissimilar alloys with liquid-phases based on the formation of desired and undesired phases along the pathway. In MaterialsMap, equilibrium thermodynamic calculations are used to predict equilibrium phases formed at slow cooling rate, while Scheil-Gulliver simulations are employed to predict non-equilibrium phases formed during rapid cooling. Additionally, by combining these two simulations, MaterialsMap offers a thorough guide for understanding phase formation in various manufacturing processes, assisting users in making informed decisions during material selection and production. As a demonstration of this approach, a compositional pathway was designed from pure Al to pure Cu through Ag using MaterialsMap. The design was experimentally verified using resistance spot welding (RSW).
Additively manufactured Ni-20Cr to V functionally graded material: Computational predictions and experimental verification of phase formations
Throughout this work, a database for the Cr-Ni-V system was constructed by modeling the binary Cr-V and ternary Cr-Ni-V systems using the CALPHAD approach aided by density functional theory (DFT)-based first-principles calculations and ab initio molecular dynamics (AIMD) simulations. To validate this new database, a functionally graded material (FGM) using Ni-20Cr and elemental V was fabricated using directed energy deposition additive manufacturing (DED AM) and experimentally characterized. The deposited Ni-20Cr was pure fcc phase, while increasing the amount of V across the gradient resulted in the formation of sigma phase, followed by the bcc phase. The experimentally measured phase data was compared with computational predictions made using a Cr-Ni-V thermodynamic database from the literature as well as the database developed in the present work. The newly developed database was shown to better predict the experimentally observed phases due to its accurate modeling of binary systems within the database and the ternary liquid phase, which is critical for accurate Scheil calculations.
Revealing Deformation Mechanisms in Polymer-Grafted Thermoplastic Elastomers via In Situ Small-Angle X-ray Scattering
The tunable properties of thermoplastic elastomers (TPEs), through polymer chemistry manipulations, enable these technologically critical materials to be employed in a broad range of applications. The need to “dial-in” the mechanical properties and responses of TPEs generally requires the design and synthesis of new macromolecules. In these designs, TPEs with nonlinear macromolecular architectures outperform the mechanical properties of their linear copolymer counterparts, but the differences in the deformation mechanism providing enhanced performance are unknown. Here, in situ small-angle X-ray scattering (SAXS) measurements during uniaxial extension reveal distinct deformation mechanisms between a commercially available linear poly(styrene)–poly(butadiene)–poly(styrene) (SBS) triblock copolymer and the grafted SBS version containing grafted poly(styrene) (PS) chains from the poly(butadiene) (PBD) midblock. The neat SBS (φ SBS = 100%) sample deforms congruently with the macroscopic dimensions, with the domain spacing between spheres increasing and decreasing along and transverse to the stretch direction, respectively. At high extensions, end segment pullout from the PS-rich domains is detected, which is indicated by a disordering of SBS. Conversely, the PS-grafted SBS that is 30 vol % SBS and 70% styrene (φ SBS = 30%) exhibits a lamellar morphology, and in situ SAXS measurements reveal an unexpected deformation mechanism. During deformation, there are two simultaneous processes: significant lamellar domain rearrangement to preferentially orient the lamellae planes parallel to the stretch direction and crazing. The samples whiten at high strains as expected for crazing, which corresponds with the emergence of features in the 2D SAXS pattern during stretching consistent with fibril-like structures that bridge the voids in crazes. The significant domain rearrangement in the grafted copolymers is attributed to the new junctions formed across multiple PS domains by the grafting of a single chain. In conclusion, the in situ SAXS measurements provide insights into the enhanced mechanical properties of grafted copolymers that arise through improved physical cross-linking that leads to nanostructure domain reorientation for self-reinforcement and craze formation where fibrils help to strengthen the polymer.
Comparing forward and inverse design paradigms: A case study on refractory high-entropy alloys
Not provided.
Thermodynamic modeling of the Nb-Ni system with uncertainty quantification using PyCalphad and ESPEI
Here, the Nb–Ni system is remodeled with uncertainty quantification (UQ) using software tools of PyCalphad and ESPEI (the Extensible, Self-optimizing Phase Equilibria Infrastructure) with the presently implemented capability of modeling site fraction based on Wyckoff positions. The five- and three-sublattice models are used to model the topologically close pack (TCP) μ-Nb 7 Ni 6 and δ-NbNi 3 phases according to their Wyckoff positions. The inputs for CALPHAD-based thermodynamic modeling include the thermochemical data as a function of temperature predicted by first-principles and phonon calculations based on density functional theory (DFT), ab initio molecular dynamics (AIMD) simulations, together with phase equilibrium and site fraction data in the literature. In addition to phase diagram and thermodynamic properties, the CALPHAD-based predictions of site fractions of Nb in μ-Nb 7 Ni 6 agree well with experimental data. Furthermore, the UQ estimation using the Markov Chain Monte Carlo (MCMC) method as implemented in ESPEI is applied to study the uncertainty of site fraction in μ-Nb 7 Ni 6 and enthalpy of mixing (ΔH mix ) in liquid.