Review of iodine behavior from nuclear fuel dissolution to environmental release
During nuclear fuel reprocessing, radioiodine, can be released.
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
Engineering topics
Beck, Chelsie L.
Publications and source records attributed to Beck, Chelsie L..
Analytical capabilities for iodine detection: Review of possibilities for different applications
This Review summarizes a range of analytical techniques that can be used to detect, quantify, and/or distinguish between isotopes of iodine (e.g., long-lived 129 I, short-lived 131 I, stable 127 I). One reason this is of interest is that understanding potential radioiodine release from nuclear processes is crucial to prevent environmental contamination and to protect human health as it can incorporate into the thyroid leading to cancer. It is also of interest for evaluating iodine retention performances of next-generation iodine off-gas capture materials and long-term waste forms for immobilizing radioiodine for disposal in geologic repositories. Depending upon the form of iodine (e.g., molecules, elemental, and ionic) and the matter state (i.e., solid, liquid, and gaseous), the available options can vary. In addition, several other key parameters vary between the methods discussed herein, including the destructive vs nondestructive nature of the measurement process (including in situ vs ex situ measurement options), the analytical data collection times, and the amount of sample required for analysis.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Separation of gold from irradiated actinide material utilizing a 2- thenoyltrifluoroacetone extraction resin
Post-detonation nuclear forensics capabilities depend on the ability to rapidly isolate radionuclides to improve measurement quality. In this work an extraction chromatography resin was developed utilizing the extractants thenoyltrifluoroacetone and 1-octanol supported on Eichrom prefilter resin. Here the resin was tested in nitric and hydrochloric acid matrices. In nitric acid matrices the resin is able to extract zirconium, while in hydrochloric acid matrices it is possible to extract iron and gallium. In all acid conditions tested gold is retained but can be removed from the column with a 10% thiourea rinse.
38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
Assessing Gas-Phase Ion Reactivity of 50 Elements with NO and the Direct Application for 239 Pu in Complex Matrices Using ICP-MS/MS
Understanding the reactivity of metal cations with various reaction gases in ICP-MS/MS is important to determine the best gas to use for a given analyte/interference pair. In this study, nitric oxide (NO) was investigated as the reaction gas following previous experimental designs. The reactions with 50 elements were investigated to examine periodic trends in reactivity, validate theoretical modeling of reaction enthalpies as a method to screen reactant gases, and provide a baseline for potential in-line gas separation methods. ICP-MS/MS studies involving actinides are typically limited to Th, U and Pu, with analyses of Np and Am rarely reported in the literature. To date, only two previous methods have investigated the use of NO in ICP-MS/MS analyses. To showcase the utility of NO, a method was developed to measure 239 Pu in the presence of environmental matrix constituent and other actinides, like what could be expected from post-detonation debris, with no chemical separation prior to analysis. 239 Pu + was reacted to form 239 Pu 16 O + , eliminating interferences derived from the sample matrix by measuring 239 Pu + intensity at m/z = 255 ( 239 Pu 16 O + ). To validate NO for 238 U 1 H + interference removal in environmental matrices, standard reference materials were diluted to 1 mg per gram of solution and spiked to 0.05 pg/g of 239 Pu and 1 µg/g 238 U (Pu/U = 5 x 10 -8 ). Measured 239 Pu concentrations were within 6% of the spiked value. In conclusion, these results demonstrate that reliable 239 Pu measurements can be made at levels relevant to nuclear forensics without the need for extensive chemical matrix separation prior to analysis.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Evaluation of SR/ TEVA/ TRU triple stack for separation of activation products
A rapid method to separate Ta, Po, Au, Pt, and W from a sample containing mixed fission and activation products was developed using three commercially available extraction chromatography resins stacked in series. When the separation was tested using all the target activation products, even those with short half-lives were measurable. Finally, combining multiple extraction chromatography resin cartridges in tandem allows for multiple short-lived activation products to be separated from one sample addition without the complication of multiple steps.
38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
Removal of fission product tellurium and iodine from recently irradiated HEU using copper metal
Gamma detection of select fission products or activation products such as 153 Sm and 239 Np in a fission sample is difficult due to gamma interferences from radiotellurium and radioiodine. To aid in the detection of these difficult-to-detect nuclides, the radiotellurium and radioiodine were removed using Cu metal turnings. This method is highly effective at the removal of the interfering radionuclides removing > 98% of the radiotellurium and radioiodine. A mechanistic study was conducted. Determining the deposition mechanism, using a number of techniques including XANES and electrochemistry providing an understanding of the electrochemical path for the Te deposition. Initial work focused on the use of stable Te, further expanding into activated TeO 2 , and a fresh fission sample. Importantly, this method presents a rapid method for the direct detection of select fission products that could have a significant impact on nuclear related fields including nuclear forensics.
38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
Determination of distribution coefficients of 41 elements in nitric and hydrochloric acids for actinide resin
The distribution coefficients of 41 elements were determined on Eichrom’s Actinide resin in HCl and HNO 3 solutions of molarities between 0.01 M and 9 M. Herein a separation scheme for these 41 elements was designed utilizing these distribution coefficients that combines the Actinide resin with Eichrom’s TRU resin. Overall, these values improve the ability to create separations targeting specific analytes utilizing Actinide resin.
38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
Update of the Cesium-136 Cumulative Fission Yields at Multiple Neutron Energies
Nuclear data is foundational to several fields, including nuclear forensics. Nuclear forensics investigations of fission events, relies heavily on the cumulative fission yields, however several highly useful fission products suffer from very poor nuclear data including cumulative fission yields or associated uncertainties in that value. Cesium-136 is a highly relevant example of this issue, where the cumulative fission yield may be accurate but its uncertainty high enough to preclude its usefulness. In this work we evaluate and calculate an updated cumulative fission yield for 136 Cs for 235 U, 238 U, and 239 Pu at multiple neutron energies or sources using data obtained from irradiation campaigns. In all cases these newly determined cumulative fission yields provided small changes to the actual fission yields but had dramatic improvements to the uncertainty in those yields. These improvements in uncertainty will enable nuclear forensics end users to use 136 Cs data with more confidence.
73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
Adsorption of Iodine on Metal Coupons in Humid and Dry Environments
In this study, five different metal coupons were evaluated for gaseous iodine [I2(g)] adsorption including two stainless steels (i.e., SS304 and SS316), two Inconel® alloys (i.e., 625 and 718) and pure Ni (i.e., Ni-200) within a dynamic flow-through system where temperature, iodine concentration, flow rate, atmosphere, and relative humidity were controlled. Humidity was shown to be critical to iodine adsorption on SS304 and SS316 and Ni-200 at ambient temperatures. The results presented herein suggest that a moisture mediated reaction is occurring. However, higher humidity levels decrease the adsorption, suggesting an ideal range of humidity for highest corrosion. A comparison of the five metal substrates showed the highest I2(g) adsorption in the following descending order Ni-200 > SS304 > SS316 >718>625.The 625 and 718 Inconel alloys were fairly inert to iodine adsorption under the conditions tested. Characterization by scanning electron microscopy, energy dispersive X-ray spectroscopy, and X-ray diffraction of the Ni-200 coupon indicates that NiI2 is formed and flakes off the surface as a black powder. The SS304 and SS316 coupons showed evidence of extensive reactions with I2(g) and formed a much more deliquescent corrosion product, which reacted with air when removed from the flow-through system for weighing on the analytical balance. These findings assist in predicting iodine adsorption behavior on a variety of metal surfaces under various conditions.
Beck, Chelsie L.↗
Iodine Vapor Reactions with Pure Metal Wires at Temperatures of 100–139 °C in Air
In this work, I 2(g) reactions with 11 metal wires (i.e., Al, Ag, Cu, In, Mo, Nb, Ni, Pd, Pt, Sn, Ta) were evaluated at three temperatures (i.e., 100 ± 3°C, 123 ± 4°C, 139 ± 5°C) with exposure times of 24 hours at each temperature. Over these temperatures, some of the metals showed increased mass gain with higher temperatures (i.e., In, Ag, Cu), Sn showed decreased iodine capture at increased temperatures, and most metals (i.e., Mo, Nb, Ni, Pd, Pt, and Ta) showed little to no mass gain at all temperatures. Silver mordenite (AgZ) was used as a standard during these studies and showed a consistent mass gain (m% I ) of 10.6 → 12.8% over this temperature range. The values of mass of iodine captured per mass of starting metal (g g -1 ) ranged widely across the study with the highest values achieved for (in descending order) Sn-T 100°C (4.37), In-T 139°C (3.34), Sn-T 123°C (1.98), In-T 123°C (1.57), Ag-T 139°C (1.19), In-T 100°C (0.97), and Cu-T 139°C (0.71). In some cases, the metal-iodide complex was not stable at the experimental temperature and it was clear some volatility had occurred during the experiment based on discoloration in the vials. These results show that some metals can have extensive reactions with I 2(g) without showing metal-iodide preferences over metal-oxide formation based on thermodynamic predictions. It is possible that materials such as these could be implemented near nuclear facilities to getter I 2(g) in the event of a nuclear accident.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Single-Use Destructive Assay for Uranium Hexafluoride Sampling
Sampling uranium hexafluoride (UF6) for the determination of enrichments by destructive analysis (DA) is a critical component in the International Atomic Energy Agency’s layered safeguards approach for uranium processing facilities. Typically, gram-quantity UF6 samples are collected during inspections and stored under tag-and-seal until transportation to an off-site analytical laboratory. The shipping times can be long, and evolving restrictions on radioactive/corrosive materials shipments may increasingly limit the IAEA’s ability to transport UF6 samples easily. Pacific Northwest National Laboratory has developed a low-cost UF6 sampling technology called Single-Use Destructive Assay (SUDA) that addresses these challenges, as well as provides DA sample geometries that can be tailored for different analytical methods, including potential on-site analyses. The SUDA samplers, along with a unique holder, are designed for direct attachment to existing taps at uranium processing facilities, allowing gaseous UF6 to come into direct contact with a zeolite film. The SUDA technology features the ability to capture uranium in a more easily shipped and handled form as the solid, more stable, and relatively less hazardous hydrated uranyl fluoride (UO2F2•nH2O), which is formed through the controlled hydrolysis of UF6. We have recently simulated uranium collection under enrichment plant sampling conditions to further improve our understanding of SUDA sampling. Presented here is our recent work on measuring the relationship between sampling conditions and uranium collection, which includes control of the uranium-mass-to-zeolite ratio and assessing variable UF6 gas and sampling parameters that can affect collection using the SUDA sampler.
Pope, Timothy R.↗
Molecular Iodine Interactions with Metal Substrates: Towards the Understanding of Iodine Interactions in the Environment Following a Nuclear Accident
In order to evaluate the potential impacts to the public from radioiodine in a nuclear event, it is vital to expand our understanding of the interaction of molecular iodine with various surfaces. There are many potential surfaces that iodine could interact with in and around a nuclear facility, including stainless steel. This study, carried out at ambient temperature, pressure and humidity, demonstrates the highly adsorptive nature of molecular iodine on two types of austenitic stainless steel, 304L and 316L. In the authors review of available literature, Fe is the only metal in stainless steel that is assumed to react with gas-phase molecular iodine. By using a novel approach which combines Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES) with surface Energy Dispersive X-ray Spectroscopy (EDS) there is evidence of the formation of metal iodides that have not previously been verified or quantified. Samples exposed to gaseous molecular iodine formed an iodine containing corrosion product visible by scanning electron microcopy (SEM). Evaluation of the metals in the corrosion region using EDS was compared to a water leach of the same samples analyzed using ICP-OES. A comparison of the results provide evidence that the water leachate is representative of the corrosion layer and not the base material. Furthermore, it provides confirmation of metal iodide formation with minor stainless-steel constituents including: FeI2, NiI2, MnI2 and CrI2.
Beck, Chelsie L.↗
Molecular Iodine Interactions with Fe, Ni, Cr, and Stainless Steel Alloys
The adsorption behavior of molecular iodine is important for understanding the spread of radioiodine in a nuclear accident. Prior experiments indicate that, in addition to the interaction with Fe, molecular iodine [i.e., I 2(g) ] also interacts with the next most abundant components of austenitic stainless steel (i.e., Ni, and Cr) at room temperature. Here, we investigate iodine adsorption on Fe, Ni, and Cr while focusing on understanding the variables affecting adsorption as well as the iodine compounds that are formed during adsorption. Scanning electron microscopy and energy-dispersive X-ray spectroscopy were used to characterize the surfaces of exposed metal particles and aid in the understanding of the morphology and chemistry of iodine interactions with the substrates. Inductively coupled plasma optical emission spectroscopy was used to detect low levels of metal iodides and X-ray photoelectron spectroscopy was used to confirm the formation of the metal iodides. The role of environmental factors (e.g., humidity and oxygen content) for iodine adsorption on metal substrates is addressed. The individual metals demonstrated formation of metal iodides for Fe and Ni particles from interaction with I 2(g) . The formation of metal iodides may indicate the affinity of iodine for the respective metal. In this study, the iodine affinities ranked Fe > Ni > Cr as determined by the quantity of chemisorbed iodine. This trend is also supported by the distributions and proportions of metals in the corrosion product of the stainless steels. The exposures without oxygen and humidity indicate the potential of a multistep iodine adsorption process where iodine first attacks the oxide layer and then chemisorbs to the exposed metal.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Development of a separation method for rare earth elements using LN resin
The lanthanide elements and isotopes are analytes of significant interest for several nuclear-related fields. Chemical separation among these elements is uniquely challenging due to their nearly identical chemical properties. This difficulty in interelement separation can create obstacles for quantitative radiometric analysis, specifically for isotopes without distinct energy emissions easily measured by gamma spectroscopy, for example Tb-161. Presented in this work is an optimized method for the isolation of individual rare earth elements using Eichrom’s LN resin.
Arrigo, Leah M.↗