Engineering Papers⌕ Search

Engineering topics

Baugh, B. T.

Publications and source records attributed to Baugh, B. T..

4 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Manipulator for Heating and Cooling in Ultrahigh Vacuum

In sample-transfer system for use in ultrahigh vacuum, samples mounted on threaded circular holder transferred to flip mechanism of manipulator by simple translation and rotation. Flip mechanism contains electrode assembly and thermocouple that make direct contact with sample. Copper plate and flexible strap attached to receiving block to cool sample. Simple modifications allow broad range of sample temperatures (150 to 1,750 K) and direct temperature measurements, while retaining advantage of additional degree of freedom provided by flip mechanism of precise manipulator.

Outlaw, R.↗
NASA NTRS1985

Ultrahigh-Vacuum Sample-Transfer System

Ultrahigh-vacuum (UHV) sample-transfer system developed features short-term (less than 30 minutes) transfer of samples from atmospheric pressure into sample manipulator within UHV analysis system without significantly degrading system pressure. New system is austere approach to sample transfer, involving no automation. Total cost of system is factor of 10 less than commercially available instruments.

Outlaw, R.↗
NASA NTRS1982

Precision manipulator heating and cooling assembly compatible with sample transfer

A technique is described for the transfer of a UHV sample system to a precision manipulator. It allows direct sample temperature measurement in a broad range of sample temperatures (150-1750 K) and simultaneously retains the benefit of the additional degree of freedom provided by the precision manipulator flip mechanism. The technique is similar to that reported by Crider (1976) but with several modifications. The pump is mounted at the extreme end of the magnetically coupled linear motion feedthrough (to maximize the separation). Samples are mounted on a threaded circular sample holder, transferred to the flip mechanism of the manipulator. The flip mechanism contains a rear electrode assembly and thermocouple, in direct contact with the sample, and a copper plate and a flexible strap are attached to the receiving block (to facilitate sample cooling).

Outlaw, R. A.↗