Engineering Papers⌕ Search

Engineering topics

Batina, John T.

Publications and source records attributed to Batina, John T..

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Progress in unstructured-grid methods development for unsteady aerodynamic applications

The development of unstructured-grid methods for the solution of the equations of fluid flow and what was learned over the course of the research are summarized. The focus of the discussion is on the solution of the time-dependent Euler equations including spatial discretizations, temporal discretizations, and boundary conditions. An example calculation with an implicit upwind method using a CFL number of infinity is presented for the Boeing 747 aircraft. The results were obtained in less than one hour CPU time on a Cray-2 computer, thus, demonstrating the speed and robustness of the capability. Additional calculations for the ONERA M6 wing demonstrate the accuracy of the method through the good agreement between calculated results and experimental data for a standard transonic flow case.

Batina, John T.↗
NASA NTRS1992

Implicit upwind-Euler solution algorithms for unstructured-grid applications

The development of implicit upwind algorithms for the solution of the three-dimensional, time-dependent Euler equations on unstructured tetrahedral meshes is described. The implicit temporal discretization involves either a two-sweep Gauss-Seide relaxation procedure, a two-sweep Point-Jacobi relaxation procedure, or a single-sweep Point-Implicit procedure; the upwind spatial discretization is based on the flux-difference splitting of Roe. Detailed descriptions of the three implicit solution algorithms are given, and calculations for the Boeing 747 transport configuration are presented to demonstrate the algorithms. Advantages and disadvantages of the implicit algorithms are discussed. A steady-state solution for the 747 configuration, obtained at transonic flow conditions using a mesh of over 100,000 cells, required less than one hour of CPU time on a Cray-2 computer, thus demonstrating the speed and robustness of the general capability.

Batina, John T.↗
NASA NTRS1992

CFD methods development considerations for unsteady aerodynamic analysis

The development of computational fluid dynamics (CFD) methods for unsteady aerodynamic analysis is described. Special emphasis is placed on considerations that are required for application of the methods to unsteady aerodynamic flow problems. Two broad categories of topics are presented to illustrate the major points. Although primary application of these CFD methods is to relatively low frequency oscillatory phenomena such as flutter, the ideas that are presented may be of value to developers of computational aeroacoustic methods for predicting high frequency acoustics.

Batina, John T.↗
NASA NTRS1992

A gridless Euler/Navier-Stokes solution algorithm for complex two-dimensional applications

The development of a gridless computational fluid dynamics (CFD) method for the solution of the two-dimensional Euler and Navier-Stokes equations is described. The method uses only clouds of points and does not require that the points be connected to form a grid as is necessary in conventional CFD algorithms. The gridless CFD approach appears to resolve the problems and inefficiencies encountered with structured or unstructured grid methods. As a result, the method offers the greatest potential for accurately and efficiently solving viscous flows about complex aircraft configurations. The method is described in detail, and calculations are presented for standard Euler and Navier-Stokes cases to assess the accuracy and efficiency of the capability.

Batina, John T.↗
NASA NTRS1992

Three-dimensional time-marching aeroelastic analyses using an unstructured-grid Euler method

Modifications to a three dimensional, implicit, upwind, unstructured-grid Euler code for aeroelastic analysis of complete aircraft configurations are described. The modifications involve the addition of the structural equations of motion for their simultaneous time integration with the governing flow equations. The paper presents a detailed description of the time marching aeroelastic procedure and presents comparisons with experimental data to provide an assessment of the capability. Flutter results are shown for an isolated 45 degree swept-back wing and a supersonic transport configuration with a fuselage, clipped delta wing, and two identical rearward-mounted nacelles. Comparisons between computed and experimental flutter characteristics show good agreement, giving confidence in the accuracy of the aeroelastic capability that was developed.

Rausch, Russ D.↗
NASA NTRS1992

Unstructured-grid methods development for unsteady aerodynamic and aeroelastic analyses

The current status of unstructured grid methods developed in the Unsteady Aerodynamics Branch at NASA Langley Research Center is described. These methods are being developed for unsteady aerodynamic and aeroelastic analyses. Flow solvers that have been developed for the solution of unsteady Euler equations are highlighted. The results demonstrate two and three dimensional applications for both steady and unsteady flows. Comparisons are also made with solutions obtained using a structured grid code and with experimental data to determine the accuracy of the unstructured grid methodology. These comparisons show good agreement which thus verifies the accuracy.

Batina, John T.↗
NASA NTRS1992

Quality assessment of two- and three-dimensional unstructured meshes and validation of an upwind Euler flow solver

Quality assessment procedures are described for two-dimensional and three-dimensional unstructured meshes. The procedures include measurement of minimum angles, element aspect ratios, stretching, and element skewness. Meshes about the ONERA M6 wing and the Boeing 747 transport configuration are generated using an advancing front method grid generation package of programs. Solutions of Euler's equations for these meshes are obtained at low angle-of-attack, transonic conditions. Results for these cases, obtained as part of a validation study demonstrate the accuracy of an implicit upwind Euler solution algorithm.

Woodard, Paul R.↗
NASA NTRS1992

Quality assessment of two- and three-dimensional unstructured meshes and validation of an upwind Euler flow solver

Quality assessment procedures are described for two-dimensional unstructured meshes. The procedures include measurement of minimum angles, element aspect ratios, stretching, and element skewness. Meshes about the ONERA M6 wing and the Boeing 747 transport configuration are generated using an advancing front method grid generation package of programs. Solutions of Euler's equations for these meshes are obtained at low angle-of-attack, transonic conditions. Results for these cases, obtained as part of a validation study demonstrate accuracy of an implicit upwind Euler solution algorithm.

Woodard, Paul R.↗
NASA NTRS1992

A fast implicit upwind solution algorithm for three-dimensional unstructured dynamic meshes

A fast implicit upwind algorithm for the solution of the time-dependent Euler equations is presented for aerodynamic analysis involving unstructured dynamic meshes. The spatial discretization of the scheme is based on the upwind approach of Roe, referred to as flux-difference splitting (FDS). The FDS approach is naturally dissipative and captures shock waves and contact discontinuities sharply. The temporal discretization of the scheme involves an implicit time-integration using a two-sweep Gauss-Seidel relaxation procedure. The procedure is computationally efficient for either steady or unsteady flow problems. A detailed description is given of the implicit upwind solution algorithm along with results which assess the capability. The results are presented for the NACA 0012 airfoil and for the Boeing 747 aircraft. The 747 geometry includes the fuselage, wing, horizontal and vertical tails, under-wing pylons, and flow-through engine nacelles. Euler solutions for the 747 aircraft on an unstructured tetrahedral mesh containing approximately 100,000 cells were obtained to engineering accuracy in less than one hour CPU time on a Cray-2 computer.

Batina, John T.↗
NASA NTRS1992

Three-dimensional time-marching aeroelastic analyses using an unstructured-grid Euler method

The modifications to a 3D implicit, upwind, unstructured-grid Euler code for aeroelastic analysis of complete aircraft configurations described involve the addition of structural equations of motion for their simultaneous time integration with the governing flow equations. A detailed description of the time-marching aeroelastic procedure and comparisons with experimental data are presented, to provide an assessment of capabilities. Flutter results are shown for an isolated 45-deg sweptback wing and an SST with a fuselage, clipped delta wing, and two identical rearward-mounted nacelles. Comparisons between computed and experimental flutter characteristics show good agreement.

Rausch, Russ D.↗
NASA NTRS1992

Spatial and temporal adaptive procedures for the unsteady aerodynamic analysis of airfoils using unstructured meshes

An algorithm which combines spatial and temporal adaption for the time integration of the two-dimensional Euler equations on unstructured meshes of triangles is presented. Spatial adaption involves mesh enrichment to add elements in high gradient regions of the flow and mesh coarsening to remove elements where they are no longer needed. Temporal adaption is a time accurate, local time stepping procedure which integrates the flow equations in each cell according to the local numerical stability constraint. The flow solver utilizes a four-stage Runge-Kutta time integration scheme with an upwind flux-split spatial discretization. Results obtained using spatial and temporal adaption indicate that highly accurate solutions can be obtained with a significant savings of computing time over global time stepping.

Hooker, John R.↗
NASA NTRS1992

A finite-difference approximate-factorization algorithm for solution of the unsteady transonic small-disturbance equation

A time-accurate approximate-factorization (AF) algorithm is described for solution of the three-dimensional unsteady transonic small-disturbance equation. The AF algorithm consists of a time-linearization procedure coupled with a subiteration technique. The algorithm is the basis for the Computational Aeroelasticity Program-Transonic Small Disturbance (CAP-TSD) computer code, which was developed for the analysis of unsteady aerodynamics and aeroelasticity of realistic aircraft configurations. The paper describes details on the governing flow equations and boundary conditions, with an emphasis on documenting the finite-difference formulas of the AF algorithm.

Batina, John T.↗
NASA NTRS1992

Implicit upwind-Euler solution algorithms for unstructured-grid applications

The development of implicit upwind algorithms for the solution of the three-dimensional, time-dependent Euler equations on unstructured tetrahdral meshes is described. The implicit temporal discretization involves either a two-sweep Gauss-Seidel relaxation procedure, a two-sweep Point-Jacobi relaxation procedure, or a single-sweep Point-Implicit procedure; the upwind spatial discretization is based on the flux-difference splitting of Roe. Detailed descriptions of the three implicit solution algorithms are given, and calculations for the Boeing 747 transport configuration are presented to demonstrate the algorithms. Advantages and disadvantages of the implicit algorithms are discussed. A steady-state solution for the 747 configuration, obtained at transonic flow conditions using s mesh of over 100,000 cells, required less than one hour of CPU time on a Cray-2 computer, thus demonstrating the speed and robustness of the general capability.

Batina, John T.↗
NASA NTRS1991

A fast implicit upwind solution algorithm for three-dimensional unstructured dynamic meshes

A fast implicit upwind algorithm for the solution of the time-dependent Euler equations is presented for aerodynamic analysis involving unstructured dynamic meshes. The spatial discretization of the scheme is based on the upwind approach of Roe, referred to as flux-difference splitting (FDS). The FDS approach is naturally dissipative and captures shock waves and contact discontinuities sharply. The temporal discretization of the scheme involves an implicit time-integration using a two-sweep Gauss-Seidel relaxation procedure. The procedure is computationally efficient for either steady or unsteady flow problems. A detailed description is given of the implicit upwind solution algorithm along with results which assess the capability. The results are presented for the NACA 0012 airfoil and for the Boeing 747 aircraft. The 747 geometry includes the fuselage, wing, horizontal and vertical tails, under-wing pylons, and flow-through engine nacelles. Euler solutions for the 747 aircraft on an unstructured tetrahedral mesh containing approximately 100,000 cells were obtained to engineering accuracy in less than one hour CPU time on a Cray-2 computer.

Batina, John T.↗
NASA NTRS1991

Unstructured-grid methods development for unsteady aerodynamic and aeroelastic analyses

The current status of unstructured grid methods development in the Unsteady Aerodynamics Branch at NASA-Langley is described. These methods are being developed for unsteady aerodynamic and aeroelastic analyses. The flow solvers are highlighted which were developed for the solution of the unsteady Euler equations and selected results are given which show various features of the capability. The results demonstrate 2-D and 3-D applications for both steady and unsteady flows. Comparisons are also made with solutions obtained using a structured grid code and with experimental data to determine the accuracy of the unstructured grid methodology. These comparisons show good agreement which thus verifies the accuracy.

Batina, John T.↗