Engineering Papers⌕ Search

Engineering topics

Bangert, L. S.

Publications and source records attributed to Bangert, L. S..

4 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

A parametric experimental study of isolated rectangular nozzles

A parametric study has been conducted in the Langley 16-Foot Transonic Tunnel on an isolated nonaxisymmetric fuselage, simulating a twin-engine fighter. The effects of aft-end closure distribution (top/bottom nozzle flap boattail angle vs. nozzle sidewall boattail angle) and afterbody/nozzle corner treatment (sharp or radius) were investigated. Four different closure distributions with three different corner radii were tested. Tests were conducted over a range of Mach numbers from 0.40-1.25 at zero degrees angle of attack. Solid plume simulators were used to simulate the jet exhaust.

Bangert, L. S.↗
NASA NTRS1985

Operating Characteristics of the Multiple Critical Venturi System and Secondary Calibration Nozzles Used for Weight-Flow Measurements in the Langley 16-Foot Transonic Tunnel

An investigation has been conducted in the Langley 16 Foot Transonic Tunnel to determine the weight flow measurement characteristics of a multiple critical Venturi system and the nozzle discharge coefficient characteristics of a series of convergent calibration nozzles. The effects on model discharge coefficient of nozzle throat area, model choke plate open area, nozzle pressure ratio, jet total temperature, and number and combination of operating Venturis were investigated. Tests were conducted at static conditions (tunnel wind off) at nozzle pressure ratios from 1.3 to 7.0.

Berrier, B. L.↗
NASA NTRS1982

Performance characteristics of axisymmetric convergent-divergent exhaust nozzles with longitudinal slots in the divergent

An investigation was conducted in the Langley 16 foot Transonic Tunnel and in the static test facility of that tunnel to determine the effects of divergent flap ventilation of an axisymmetric nozzle on nozzle internal (static) and wind on performance. Tests were conducted at 0 deg angle of attack at static conditions and at Mach numbers from 0.6 to 1.2. Ratios of jet total pressure to free stream static pressure were varied from 1.0 (jet off) to approximately 14.0 depending on Mach number. The results of this study indicate that divergent flap ventilation generally provided large performance benefits at overexpanded nozzle conditions and performance reductions at underexpanded nozzle conditions when compared to the baseline (unventilated) nozzles. Ventilation also reduced the peak static and wind on performance levels.

Leavitt, L. D.↗