Engineering topics

Banerdt, W. B.

Publications and source records attributed to Banerdt, W. B..

At least 55 records · Page 3

NASA NTRS1993

Geophysical models of Western Aphrodite-Niobe region: Venus

The new topography and gravitational field data for Venus expressed in spherical harmonics of degree and order up to 50 allow us to analyze the crust-mantle boundary relief and stress state of the Venusian lithosphere. In these models, we consider models in which convection is confined beneath a thick, buoyant lithosphere. We divide the convection regime into an upper mantle and lower mantle component. The lateral scales are smaller than on Earth. In these models, relative to Earth, convection is reflected in higher order terms of the gravitational field. On Venus geoid height and topography are highly correlated, although the topography appears to be largely compensated. We hypothesize that Venus topography for those wavelengths that correlate well with the geoid is partly compensated at the crust-mantle boundary, while for the others compensation may be distributed over the whole mantle. In turn the strong sensitivity of the stresses to parameters of the models of the external layers of Venus together with geological mapping allows us to begin investigations of the tectonics and geodynamics of the planet. For stress calculations we use a new technique of space- and time-dependent Green's response functions using Venus models with rheologically stratified lithosphere and mantle and a ductile lower crust. In the basic model of Venus the mean crust is 50-70 km thick, the density contrast across the crust-mantle boundary is in the range from 0.3 to 0.4 g/cm(exp -3). The thickness of a weak mantle zone may be from 350 to 1000 km. Strong sensitivity of calculated stress to various parameters of the layered model of Venus together with geological mapping and analysis of surface tectonic patterns allow us to investigate the tectonics and geodynamics of the planet. The results are presented in the form of maps of compression-extension and maximum shear stresses in the lithosphere and maps of crust-mantle boundary relief, which can be presented as a function of time. We have modeled the region of Western Aphrodite and the Niobe plains to get reasonable depths of compensation. Crust mantle boundary relief is calculated for Western Aphrodite-Niobe relative to a mean crustal thickness of 50 km. The calculations include the consequences of simple crust models and more complicated models with a weak, ductile lower crust, a strong upper mantle and a weak lower mantle layer.

Marchenkov, K. I.↗

NASA NTRS1992

A prediction of Mars seismicity from surface faulting

The shallow seismicity of Mars has been estimated by measurement of the total slip on faults visible on the surface of the planet throughout geologic time. Seismicity was calibrated with estimates based on surface structures on the moon and measured lunar seismicity that includes the entire seismogenic lithosphere. Results indicate that Mars is seismically active today, with a sufficient number of detectable marsquakes to allow seismic investigations of its interior.

Golombek, Matthew P.↗

NASA NTRS1992

Small-scale fracture patterns on the volcanic plains of Venus

Linear features with a regular spacing of about 1 km in the gridded plains of Guinevere Planitia observed in Magellan radar images of Venus are examined. Many sets of parallel, regularly spaced lineations similar to the closely spaced features of the gridded plains were found. These sets of parallel lineations, which are interpreted to be fractures, typically cover areas with dimensions of hundreds of kilometers. Several examples of these regular lineations are characterized in terms of their average fracture spacing, which is between 1 and 2.5 km; the scatter in individual spacings is about +/- 1/3 the average. It is hypothesized that these features are extension fractures in the brittle upper layers of the volcanic plains material, which formed well after emplacement and solidification of the flows.

Banerdt, W. B.↗

NASA NTRS1992

(abstract) A Broad-Band Microseismometer for Planetary Applications

There has recently been renewed interest in the development of instrumentation for making measurements on the surface of Mars. This is due to the Mars Environmental Survey (MESUR) Mission, for which approximately 16 small, long-lived (2 to 10 years), relatively inexpensive surface stations will be deployed in a planet-wide network. This will allow the investigation of processes (such as seismology and meteorology) which require the simultaneous measurement of phenomena at many widely spaced locations on the surface over a considerable length of time. Due to the large number of vehicles involved, the mass, power, and cost of the payload will be severely constrained. A seismometer has been identified as one of the highest priority instruments in the MESUR strawman payload.

Mars seismology sensors MESUR sensor network lande↗

NASA NTRS1992

Gravity and topography

The paper summarizes the fundamental gravity field constants for Mars and a brief historical review of early determinations and current-day accurate estimates. These include the planetary gravitational constant, global figure, dynamical oblateness, mean density, and rotational period. Topographic results from data acquired from the 1967 opposition to the most recent, 1988, opposition are presented. Both global and selected local topographic variations and features are discussed. The inertia tensor and the nonhydrostatic component of Mars are examined in detail. The dimensionless moment of inertia about the rotational axis is 0.4 for a body of uniform density and 0.37621 if Mars were in hydrostatic equilibrium. By comparing models of both gravity and topography, inferences are made about the degree and depth of compensation in the interior and stresses in the lithosphere.

Esposito, P. B.↗

NASA NTRS1992

Stress and tectonics on Mars

Deformation of the Martian lithosphere and the various theoretical formulations used to model its behavior on local, regional, and global scales are studied. An overview of the various classes of tectonic features found on Mars is presented. The tectonic record on Mars, which provides the basic framework for interpreting theoretical thermomechanical models in terms of major tectonic events and provinces is summarized. The thickness of the elastic lithosphere is estimated using its response to local surface loads, and significant spatial variability is found, with values ranging from 20 to 300 km. A comparison of the major radial graben systems with theoretical stress models shows that more than one mechanism of lithospheric deformation is required to produce its enormous extent.

Banerdt, W. B.↗

NASA NTRS1991

Reconciliation of stress and structural histories of the Tharsis region of Mars

New information is presented on the structural and stratigraphic evolution of the Tharsis region of Mars, along with a lithospheric deformation model that can account for the observations. According to this model, the lithosphere beneath Tharsis consists of a thin elastic crustal cap on the rise, which is mechanically detached from the strong upper mantle by a volcanically thickened, hot, weak lower crust; these layers merge into a single cooler strong lithospheric layer around the edges of the rise. It is suggested that the nonuniform distribution of tectonic features and strain around Tharsis is due to the concentration of regional stresses near weaker volcanotectonic centers.

Tanaka, Kenneth L.↗

NASA NTRS1991

Horizontal stress in planetary lithospheres from vertical processes

Understanding the stress states in a lithosphere is of fundamental importance for planetary geophysics. It is closely linked to the processes which form and modify tectonic features on the surface and reflects the behavior of the planet's interior, providing a constraint for the difficult problem of determining interior structure and processes. The tectonics on many extraterrestrial bodies (Moon, Mars, and most of the outer planet satellites) appears to be mostly vertical, and the horizontal stresses induced by vertical motions and loads are expected to dominate the deformation of their lithospheres. Herein, only changes are examined in the state of stress induced by processes such as sedimentary and volcanic deposition, erosional denudation, and changes in the thermal gradient that induce uplift or subsidence. This analysis is important both for evaluating stresses for specific regions in which the vertical stress history can be estimated, as well as for applying the proper loading conditions to global stress models. All references to lithosphere herein should be understood to refer to the elastic lithosphere, that layer which deforms elastically or brittlely when subjected to geologically scaled stresses.

Banerdt, W. B.↗

NASA NTRS1991

Strain accommodation beneath structures on Mars

A recent review of tectonic features on Mars shows that most of their subsurface structures can be confidently extended only a few kilometers deep (exceptions are rifts, in which bounding normal faults penetrate the entire brittle lithosphere, with ductile flow at deeper levels). Nevertheless, a variety of estimates of elastic lithosphere thickness and application of accepted failure criteria under likely conditions on Mars suggest a brittle lithosphere that is many tens of kilometers thick. This raises the question of how the strain (extension or shortening) accommodated by grabens and wrinkle ridges within the upper few kilometers is being accommodated at deeper levels in the lithosphere. Herein, the nonrift tectonic features present on Mars are briefly reviewed, along with their likely subsurface structures, and some inferences and implications are presented for behavior of the deeper lithosphere.

Golombek, M. P.↗

NASA NTRS1991

Martian seismicity through time from surface faulting

An objective of future Mars missions involves emplacing a seismic network on Mars to determine the internal structure of the planet. An argument based on the relative geologic histories of the terrestrial planets suggests that Mars should be seismically more active than the Moon, but less active than the Earth. The seismicity is estimated which is expected on Mars through time from slip on faults visible on the planets surface. These estimates of martian seismicity must be considered a lower limit as only structures produced by shear faulting visible at the surface today are included (i.e., no provision is made for buried structures or non-shear structures); in addition, the estimate does not include seismic events that do not produce surface displacement (e.g., activity associated with hidden faults, deep lithospheric processes or volcanism) or events produced by tidal triggering or meteorite impacts. Calibration of these estimates suggests that Mars may be many times more seismically active than the Moon.

Golombek, M. P.↗

NASA NTRS1990

Constraints on the subsurface structure of Europa

The wedge-shaped bands appearing near the anti-Jovian point on Europa are tension cracks which, after formation on an intact lithosphere, have facilitated the rotation of ice-lithosphere sections decoupled from the silicate interior. Such factors as fluid pressure, surface temperature, silicate impurities in the ice, and strain rates, would have affected the processes in question. A minimum degree of differentiation is required for Europa to mechanically decouple the rotated ice lithosphere from the underlying, predominantly silicate mantle.

Golombek, M. P.↗

NASA NTRS1990

The evolution of Tharsis: Implications of gravity, topography, and tectonics

Dominating the Western Hemisphere of Mars, the Tharsis rise is an elongate area centered on Syria Planum that ascends as much as 8 to 10 km above the datum. It is intensely fractured by long, narrow grabens that extend radially hundreds of kilometers beyond the rise and is ringed by mostly concentric wrinkle ridges that formed over 2,000 km from the center of the rise. Its size, involving a full hemisphere of Mars, gives it a central role in the thermo-tectonic evolution of the planet and has stimulated a number of studies attempting to determine the sequence of events responsible for this feature. The constraints that gravity and topography data place on the current structure of Tharsis, along with insights into its development derived from comparisons of detailed regional mapping of faulting with theoretical deformation models are reviewed. Finally, a self-consistent model for the structure of Tharsis is proposed.

Banerdt, W. B.↗

NASA NTRS1988

Igneous proceses and closed system evolution of the Tharsis region of Mars

A quantitative petrologic model for the evolution of the Tharsis region on Mars is presented, which is consistent with global gravity and topography data. It is demonstrated that it is possible to form and support the topographic relief of the Tharsis plateau by a closed-system mass-conservative nearly isostatic process involving generation of magmas from a mantle source region. Extrusion and/or intrusion (or underplating) of such magmas allows low-pressure solidification, with a consequent increase in volume relative to that which would be possible in the high-pressure source region, leading to elevated topology. The distribution of densities with depth obtained by the model is quantitatively consistent with the isostatic models of Sleep and Phillips (1979, 1985).

Finnerty, A. A.↗

NASA NTRS1987

Failure strength of icy lithospheres

Lithospheric strengths derived from friction on pre-existing fractures and ductile flow laws show that the tensile strength of intact ice under applicable conditions is actually an order of magnitude stronger than widely assumed. It is demonstrated that this strength is everywhere greater than that required to initiate frictional sliding on pre-existing fractures and faults. Because the tensile strength of intact ice increases markedly with confining pressure, it actually exceeds the frictional strength at all depths. Thus, icy lithospheres will fail by frictional slip along pre-existing fractures at yeild stresses greater than previously assumed rather than opening tensile cracks in intact ice.

Golombek, M. P.↗

NASA NTRS1987

Lithospheric structure on Venus from tectonic modelling of compressional features

In previous studies, extensional models were used that incorporated realistic rheologies in order to constrain lithospheric structure. Lithospheric modelling is considered herein from the standpoint of compressional deformation. Features of presumed compressional tectonic origin are reviewed and a model for compressional folding based on lithospheric strength envelopes are presented that include the effects of both brittle and ductile yielding as well as finite elastic strength. Model predictions are then compared with the widths and spacings of observed tectonic features and it is concluded that the results are consistent with a thin crust overlying a relatively stronger mantle, with thermal gradients probably in the range of 10 to 15 deg/km.

Banerdt, W. B.↗

NASA NTRS1986

Support of long-wavelength loads on Venus and implications for internal structure

The development of a thin-shell formulation to compute stress in a planetary lithosphere is discussed. The formulation uses spherical harmonic representations of the gravity field and topography as boundary conditions to produce lateral density anomalies at two depths. The stress fields for displacement, crustal thickness anomaly, and mantle density anomaly, which are required for the boundary conditions, are calculated. The computed stresses are compared to the tectonic features of Venus. The data reveal that the highland areas are formed in a state of isostasy or uplift and are supported by dynamic processes in the mantle. Lithospheric models predict low-density mantle beneath Alta, Beta, Eisila, Thetis, and Thetus Regiones, and thick crust accompanied by higher-density mantle under Ishtar Terra and Ovda Regio.

Banerdt, W. B.↗

NASA NTRS1985

Rifting on Venus: Implications for lithospheric structure

Lithospheric strength envelopes on Venus are reviewed and their implications for large scale rifting are discussed. Their relationship to crustal thicnesses and thermal gradients are explored. Also considered are the implications of a theory for rift formation.

Banerdt, W. B.↗

NASA NTRS1985

Lithospheric strength of Ganymede: Clues to early thermal profiles from extensional tectonic features

While it is generally agreed that the strength of a planet's lithosphere is controlled by a combination of brittle sliding and ductile flow laws, predicting the geometry and initial characteristics of faults due to failure from stresses imposed on the lithospheric strength envelope has not been thoroughly explored. Researchers used lithospheric strength envelopes to analyze the extensional features found on Ganymede. This application provides a quantitative means of estimating early thermal profiles on Ganymede, thereby constraining its early thermal evolution.

Golombek, M. P.↗