Engineering topics

Baloga, S. M.

Publications and source records attributed to Baloga, S. M..

25 records · Page 2

NASA NTRS1995

Emplacement of Xenolith Nodules in the Kaupulehu Lava Flow, Hualalai Volcano, Hawaii

The basaltic Kaupulehu 1800-1801 lava flow of Hualalai Volcano, Hawaii contains abundant ultramafic xenoliths. Many of these xenoliths occur as bedded layers of semi-rounded nodules, each thinly coated with a veneer (typically 1 mm thick) of lava. The nodule beds are analogous to cobble deposits of fluvial sedimentary systems. Although several mechanisms have been proposed for the formation of the nodule beds, it was found that, at more than one locality, the nodule beds are overbank levee deposits. The geological occurrence of the nodules, certain diagnostic aspects of the flow morphology and consideration of the inferred emplacement process indicate that the Kaupulehu flow had an exceptionally low viscosity on eruption and that the flow of the lava stream was extremely rapid, with flow velocities of at least 10 m/s (more than 40 km/h. This flow is the youngest on Hualalai Volcano and future eruptions of a similar type would pose considerable hazard to life as well as property.

Guest, J. E.↗

NASA NTRS1987

A review: Quantitative models for lava flows on Mars

The purpose of this abstract is to review and assess the application of quantitative models (Gratz numerical correlation model, radiative loss model, yield stress model, surface structure model, and kinematic wave model) of lava flows on Mars. These theoretical models were applied to Martian flow data to aid in establishing the composition of the lava or to determine other eruption conditions such as eruption rate or duration.

Baloga, S. M.↗

NASA NTRS1985

Interaction of Martian Flow Ejecta Blankets with Pre-existing Impact Craters: Morphological Observations

The evidence of interaction between impact flow ejecta blankets and pre-existing landforms such as craters, scarps, and wrinkle ridges may yield important clues as to the nature of the ejecta emplacement process. The morphology of flow ejecta blankets and the interactions of these blankets with pre-emplacement impact craters were characterized. About 80 small satellite craters on or in 3 well-expressed low ejecta parent impact craters were recognized. Interaction of the blanket with pre-existing structures was studied, and several types were described. These are: (1) infilling; (2) encroachment; (3) overflow; and (4) breaching. Examination of the overall morphology of three ejecta blankets reveals a range of thickness, from depths sufficient to completely bury craters in the 5 km diameter range in distal areas of the blankets, to very thin blankets which allow subtle pre-existing topography to be visible within a half the diameter of the parent crater. Radial and azimuthal symmetries appear to exist within the blankets over a range of morphologies. It also appears that there is a weak linear correlation between the diameter of craters with nearly 100% infilling and distance from the center of the parent crater.

Pieri, D. C.↗

NASA NTRS1985

Estimates of Lava Eruption Rates at Alba Patera, Mars

The Martian volcanic complex Alba Patera exhibits a suite of well-defined, long and relatively narrow lava flows qualitatively resembling those found in Hawaii. Even without any information on the duration of the Martian flows, eruption rates (total volume discharge/duration of the extrusion) estimates are implied by the physical dimensions of the flows and the likely conjecture that Stephan-Boltzmann radiation is the dominating thermal loss mechanism. The ten flows in this analysis emanate radially from the central vent and were recently measured in length, plan areas, and average thicknesses by shadow measurement techniques. The dimensions of interest are shown. Although perhaps morphologically congruent to certain Hawaiian flows, the dramatically expanded physical dimensions of the Martian flows argues for some markedly distinct differences in lava flow composition for eruption characteristics.

Baloga, S. M.↗

NASA NTRS1985

Thermal Infrared Observations of Lava Flows During the 1984 Mauna Loa Eruption

Thermal infrared videotape images of the flowing lava streams and the vent areas at 10.6 microns were made, as well as some broadband images in the 8 to 12 micron range (for gas plume detection). These data were calibrated with on-site hand-held radiometer measurements, in-flow thermocouple measurements, and with later laboratory kiln measurements. Infrared video data are useful in quantitatively assessing the pattern and mode of flow thermal losses, particularly with regard to radiative losses from established/incipient floating crust. The general cooling of the flows downstream was readily apparent. Upper reaches of the active flow exhibited nearly crust-free main channels, radiating at about 700 to 800 degrees C. Below about the 7500 foot level (about 8 km from the vent) the flows formed nearly continuous crust and tended to spread, become less well-defined and founder due to a reduction in slope. Nevertheless, in thermal IR observations, the surface trace of the active subsurface channel was visible, radiating at about 500 to 700 degrees C. At the active flow front, most solid crust radiated at temperatures less than 500 to 600 degrees C, however bright high temperature interiors (approximately 900 to 1000 degrees C) were clearly visible though evolving fissures.

Pieri, D. C.↗

NASA NTRS1984

Sulfur flows of Ra Patera, Io

Voyager 1 imaging data have been used to investigate the color and morphology of several radial flow-like features at Ra Patera, a broad volcanic structure at approximately 8 deg latitude and 325 deg longitude on the Galilean satellite Io. It was found that downstream progressions of flow color and morphology are consistent with lava of a predominately sulfur composition cooling radiatively and erupting in the range of 470 to 520 K at effusion rates at 10 to the 10th to 10 to the 11th cubic cm/sec. This implies global resurfacing rates by volcanic flows on Io of the order of 1 cm/year. Calculated energy content and effusion rates for flows at Ra Patera, using the physical parameters of sulfur, are of the order of the largest known terrestrial basaltic eruptions and are consistent with calculations of globally available energy.

Pieri, D. C.↗

NASA NTRS1983

The reflection spectrum of liquid sulfur - Implications for Io

The spectral reflectance from 0.38 to 0.75 micron of a column of liquid sulfur has been measured at several temperatures between the melting point (approximately 118 C) and 173 C. Below 160 C the spectral reflectance was observed to vary reversibly as a function of temperature, indepenent of the previous thermal history of the column. Once the temperature exceeded 160 C, the spectrum would not change given a subsequent decrease in temperature. The spectral reflectance of the liquid-sulfur column at all temperatures was very low (10-19 percent). Combining this information with Voyager spectrophotometry of Jupiter's satellite Io, it is concluded that liquid sulfur at any temperature on Io's surface would be classified as a 'black area' according to the standards used by the Voyager imaging team in their spectrophotometric analysis (Soderblom, Johnson, Morrison, Danielson, Smith, Veverka, Cook,Sagan, Kupferman, Pieri, Mosher, Avis, Gradie, and Clancy /1980/.

Nelson, R. M.↗