Engineering Papers⌕ Search

Engineering topics

Balbuena, P B

Publications and source records attributed to Balbuena, P B.

Platinum-monolayer Electrocatalysts: Palladium Interlayer on IrCo Alloy Core Improves Activity in Oxygen-reduction Reaction

We describe the synthesis and electrocatalytic properties of a new low-Pt electrocatalyst consisting of an IrCo core, a Pd interlayer, and a surface Pt monolayer, emphasizing the interlayer's role in improving electrocatalytic activity for the oxygen-reduction reaction on Pt in HClO{sub 4} solution. We prepared the IrCo alloys by decomposing, at 800 C, hexacyanometalate, KCoIr(CN){sub 6}, adsorbed on the carbon surfaces. The synthesis of Ir{sub 3}Co/C involved heating a mix of metal salts and carbon in hydrogen at 500 C. Thereafter, we placed a palladium and/or platinum monolayer on them via the galvanic displacement of an underpotentially deposited copper monolayer. The electrocatalysts were characterized using structural- and electrochemical-techniques. For PtML/PdML/IrCo/C, we observed a Pt mass activity of 1.18 A/mg{sub (Pt)} and the platinum-group-metals mass of 0.16 A/mg{sub (Pt, Pd, Ir)}. In comparison, without a Pd interlayer, i.e., Pt{sub ML}/IrCo/C, the activities of 0.15 A/mg{sub (Pt)} and 0.036 A/mg{sub (Pt, Pd, Ir)} were considerably lower. We consider that the palladium interlayer plays an essential role in achieving high catalytic activity by adjusting the electronic interaction of the platinum monolayer with the IrCo core, so that it accelerates the kinetics of adsorption and desorption of the intermediates of oxygen reduction. A similar trend was observed for Pt{sub ML}/Pd{sub ML} and Pt{sub ML} deposited on Ir{sub 3}Co/C alloy core. We used density functional theory to interpret the observed phenomena.

08 HYDROGEN↗

Hydrogen storage based on physisorption.

Physisorption of molecular hydrogen based on neutral and negatively charged aromatic molecular systems has been evaluated using ab initio calculations to estimate the binding energy, {Delta}H, and {Delta}G at 298 ({approx}77 bar) and 77 K (45 bar) in order to compare calculated results with experimental measurements of hydrogen adsorption. The molecular systems used in this study were corannulene (C{sub 20}H{sub 10}), dicyclopenta[def,jkl]triphenylene (C{sub 20}H{sub 10}), 5,8-dioxo-5,8-dihydroindeno[2,1-c]fluorene (C{sub 20}H{sub 10}O{sub 2}), 6-hexyl-5,8-dioxo-5,8-dihydroindeno[2,1-c]fluorene (C{sub 26}H{sub 22}O{sub 2}), coronene (C{sub 24}H{sub 12}), dilithium phthalocyanine (Li{sub 2}Pc, C{sub 32}H{sub 16}Li{sub 2}N{sub 8}), tetrabutylammonium lithium phthalocyanine (TBA-LiPc, C{sub 48}H{sub 52}LiN{sub 9}), and tetramethylammonium lithium phthalocyanine (TMA-LiPc, C{sub 36}H{sub 28}LiN{sub 9}). It was found (a) that the calculated term that corrects 0 K electronic energies to give Gibbs energies (thermal correction to Gibbs energy, TCGE) serves as a good approximation of the adsorbent binding energy required in order for a physisorption process to be thermodynamically allowed and (b) that the binding energy for neutral aromatic molecules varies as a function of curvature (e.g., corannulene versus coronene) or if electron-withdrawing or -donating groups are part of the adsorbent. A negatively charged aromatic ring, the lithium phthalocyanine complex anion, [LiPc]{sup -}, introduces charge-induced dipole interactions into the adsorption process, resulting in a doubling of the binding energy of Li{sub 2}Pc relative to corannulene. Experimental hydrogen adsorption results for Li{sub 2}Pc, which are consistent with MD simulation results using x-Li{sub 2}Pc to simulate the adsorbent, suggest that only one side of the phthalocyanine ring is used in the adsorption process. The introduction of a tetrabutylammonium cation as a replacement for one lithium ion in Li{sub 2}Pc has the effect of increasing the number of hydrogen molecules adsorbed from 10 (3.80 wt %) for Li{sub 2}Pc to 24 (5.93 wt %) at 77 K and 45 bar, suggesting that both sides of the phthalocyanine ring are available for hydrogen adsorption. MD simulations of layered tetramethylammonium lithium phthalocyanine molecular systems illustrate that doubling the wt % H{sub 2} adsorbed is possible via such a system. Ab initio calculations also suggest that layered or sandwich structures can result in significant reductions in the pressure required for hydrogen adsorption.

08 HYDROGEN↗

Molecular dynamics simulations of H{sub 2} adsorption in tetramethyl ammonium lithium phthalocyanine crystalline structures.

Tetramethyl ammonium lithium phthalocyanine is explored as a potential material for storage of molecular hydrogen. Density functional theory calculations are used to investigate the molecular structure and the dimer conformation. Additional scans performed to determine the interactions of a H{sub 2} molecule located at various distances from the molecular sites are used to generate a simple force field including dipole-induced-dipole interactions. This force field is employed in molecular dynamics simulations to calculate adsorption isotherms at various pressures. The regions of strongest adsorption are quantified as functions of temperature, pressure, and separation between molecules in the adsorbent phase, and compared to the regions of strongest binding energy as given by the proposed force field. It is found that the total adsorption could not be predicted only from the spatial distribution of the strongest binding energies; the available volume is the other contributing factor even if the volume includes regions of much lower binding energy. The results suggest that the complex anion is primarily involved in the adsorption process with molecular hydrogen, whereas the cation serves to provide access for hydrogen adsorption in both sides of the anion molecular plane, and spacing between the planes.

08 HYDROGEN↗