Engineering Papers⌕ Search

Engineering topics

Balas, M. J.

Publications and source records attributed to Balas, M. J..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2010

Evolving Systems: Adaptive Key Component Control and Inheritance of Passivity and Dissipativity

We propose a new framework called Evolving Systems to describe the self-assembly, or autonomous assembly, of actively controlled dynamical subsystems into an Evolved System with a higher purpose. Autonomous assembly of large, complex flexible structures in space is a target application for Evolving Systems. A critical requirement for autonomous assembling structures is that they remain stable during and after assembly. The fundamental topic of inheritance of stability, dissipativity, and passivity in Evolving Systems is the primary focus of this research. In this paper, we develop an adaptive key component controller to restore stability in Nonlinear Evolving Systems that would otherwise fail to inherit the stability traits of their components. We provide sufficient conditions for the use of this novel control method and demonstrate its use on an illustrative example.

Frost, S. A.↗
NASA NTRS1987

Suboptimal shape control for quasi-static distributed-parameter systems

An on-line control approach which will adjust the steady-state shape of a large antenna arbitrarily close to any achievable desired profile is approached. The method makes use of distributed-parameter system theory and allows refocusing using a limited number of control actuators and sensors. The controller gains are calculated by approximating the solution to an infinite-dimensional optimal quasi-static control problem. The controller gain calculation is computationally simpler than that previously proposed. The Galerkin (finite element) approximation method is used for model reduction. It is proved that both gain and state convergence can be achieved by using the proposed approximation scheme.

Balas, M. J.↗
NASA NTRS1986

Application of model reference adaptive control to a flexible remote manipulator arm

An exact modal state-space representation is derived in detail for a single-link, flexible remote manipulator with a noncollocated sensor and actuator. A direct model following adaptive controller is designed to control the torque at the pinned end of the arm so as to command the free end to track a prescribed sinusoidal motion. Conditions that must be satisfied in order for the controller to work are stated. Simulation results to date are discussed along with the potential of the model following adaptive control scheme in robotics and space environments.

Meldrum, D. R.↗
NASA NTRS1985

New Directions in Asymptotically Stable Finite-dimensional Adaptive Control of Linear Distributed Parameter Systems

Distributed Parameter Systems (DPS), such as systems described by partial differential equations, require infinite-dimensional state space descriptions to correctly model their dynamical behavior. However, any adaptive control algorithm must be finite-dimensional in order to be implemented via on-line digital computers. Finite-dimensional adaptive control of linear DPS requires stability analysis of nonlinear, time-varying, infinite-dimensional systems. The structure of nonadaptive finite-dimensional control of linear DPS is summarized as it relates to the existence of limiting systems for adaptive control. Two candidate schemes for finite-dimensional adaptive control of DPS are described and critical issues in infinite-dimensional stability analysis are discussed, in particular, the invariance principle, center manifold theory, and relationships between input-output and internal stability.

Balas, M. J.↗
NASA NTRS1985

Stable Direct Adaptive Control of Linear Infinite-dimensional Systems Using a Command Generator Tracker Approach

A command generator tracker approach to model following contol of linear distributed parameter systems (DPS) whose dynamics are described on infinite dimensional Hilbert spaces is presented. This method generates finite dimensional controllers capable of exponentially stable tracking of the reference trajectories when certain ideal trajectories are known to exist for the open loop DPS; we present conditions for the existence of these ideal trajectories. An adaptive version of this type of controller is also presented and shown to achieve (in some cases, asymptotically) stable finite dimensional control of the infinite dimensional DPS.

Balas, M. J.↗
NASA NTRS1984

A connection between state-space and doubly coprime fractional representations

Explicit formulas for a doubly coprime fractional representation of the transfer function of a lumped LTI system are given in terms of a stabilizable and detectable state-space realization of the transfer function. These formulas allow existing computational algorithms to be utilized for the purpose of computing doubly coprime factorizations. Several additional implications of this result are briefly discussed, as are some immediate extensions and future research directions.

Nett, C. N.↗
NASA NTRS1984

Linear distributed parameter systems - Closed-loop exponential stability with a finite-dimensional controller

Theoretical results are presented which characterize the linear distributed parameter system (DPS) which can be (exponentially) stabilized by a finite-dimensional controller. This characterization relies on stabilizing subspaces and the solvability of the nonlinear asymmetric Riccati equation. Also considered are connections with the usual model reduction approaches to finite-dimensional DPS controller design.

Balas, M. J.↗
NASA NTRS1984

Optimal quasi-static shape control for large aerospace antennae

In this paper, an on-line control approach which will adjust the steady-state shape of a large antenna arbitarily close to any achievable desired profile is proposed. The method makes use of distributed parameter system theory and allows refocusing using a limited number of control actuators and sensors. The controller gains are calculated by approximating the solution to an infinite-dimensional optimal quasi-static control problem. A very general convergence result for such quasi-static controllers is proved and applied to the antenna controller to show convergence, using any Galerkin (finite-element) approximation method.

Balas, M. J.↗
NASA NTRS1983

Stable feedback control of distributed parameter systems: Time and frequency domain conditions

Large space structures, or any mechanically flexible structures, are inherently distributed parameter systems (DPS) whose dynamics are modeled by partial, rather than ordinary, differential equations. Such DPS are described by operator equations on an infinite-dimensional Hilbert (or Banach) space. However, any feedback controller for such a DPS must be a finite-dimensional (and discrete-time) system in order to be implemented with on-line digital computers and a finite (small) number of actuators and sensors. There are many ways to synthesize such controllers; the Galerkin or finite-element approach is emphasized.

Balas, M. J.↗
NASA NTRS1983

Finite-dimensional discrete-time control of linear distributed parameter systems

Systems described by partial differential equations have an infinite-dimensional state space. Feedback control of such distributed parameter systems must be accomplished by finite-dimensional controllers to be implemented by on-line digital computers. A further practical constraint is that the controller must operate in discrete (rather than continuous) time. This paper investigates the stability of such distributed parameter feedback controllers in closed-loop with the actual system.

Balas, M. J.↗
NASA NTRS1983

Error analysis for a reduced-order discrete adaptive observer

The Kreisselmeier discrete adaptive observer is analyzed for the case in which the observer order is less than that of the plant. The state and parameter estimates from the observer are compared to the states and parameters for an arbitrary reduced-order model (ROM) of the plant, where the observer and ROM are of equal dimension. Conditions sufficient for ultimate boundedness of the observation errors are given, and expressions for the error bounds are derived.

Lilly, J. H.↗
NASA NTRS1983

Fractional representation theory - Robustness results with applications to finite dimensional control of a class of linear distributed systems

This paper reviews and extends the fractional representation theory. In particular, new and powerful robustness results are presented. This new theory is utilized to develop a preliminary design methodology for finite dimensional control of a class of linear evolution equations on a Banach space. The design is for stability in an input-output sense, but particular attention is paid to internal stability as well.

Nett, C. N.↗
NASA NTRS1982

Discrete-time stability of continuous-time controller designs for large space structures

In most of the stable control designs for flexible structures, continuous time is assumed. However, in view of the implementation of the controllers by on-line digital computers, the discrete-time stability of such controllers is an important consideration. In the case of direct-velocity feedback (DVFB), involving negative feedback from collocated force actuators and velocity sensors, it is not immediately apparent how much delay due to digital implementation of DVFB can be tolerated without loss of stability. The present investigation is concerned with such questions. A study is conducted of the discrete-time stability of DVFB, taking into account an employment of Euler's method of approximation of the time derivative. The obtained result gives an indication of the acceptable time-step size for stable digital implementation of DVFB. A result derived in connection with the consideration of the discrete-time stability of stable continuous-time systems provides a general condition under which digital implementation of such a system will remain stable.

Balas, M. J.↗
NASA NTRS1981

Parameter estimation of large flexible aerospace structures with application to the control of the Maypole Deployable Reflector

Systems such as the Maypole deployable reflector have a distributed parameter nature. The flexible column and hoop structure and the circular antenna of 30-100 meter diameter which it supports are described by partial, rather than ordinary, differential equations. Progress completed in reduced order modelling andd controller design and digital parameter estimation and control is summarized. Topics covered include depolyment and on-orbit operation; quasi-static (steady state) operation; dynamic distributed parameter system; autoregressive moving average identification; frequency domain procedures; direct or implicit active control; adaptive observers; parameter estimation using a linear reinforcement learning factor; feedback control; and reduced order modeling for nonlinear systems.

Balas, M. J.↗
NASA NTRS1981

SPS flexible system control assessment analysis

Active control of the Satellite Power System (SPS0, a large mechanically flexible aerospace structure is addressed. The control algorithm is the principle component in the feedback link from sensors to actuators. An analysis of the interaction of the SPS structure and its active control system is presented.

Balas, M. J.↗
NASA NTRS1980

Nonlinear state estimation and feedback control of nonlinear and bilinear distributed parameter systems

This paper presents a theory of nonlinear state observers for nonlinear and bilinear distributed parameter systems. Convergence results are proved for these observers. Linear feedback control derived from such state observers is applied to the distributed parameter system and conditions are presented for closed-loop stability. The emphasis is on finite dimensional state observers and controllers (which can be implemented with on-line computers) and conditions for their successful operation with infinite dimensional distributed parameter systems.

Balas, M. J.↗
NASA NTRS1980

Distributed parameter system coupled ARMA expansion identification and adaptive parallel IIR filtering - A unified problem statement

A novel interconnection of distributed parameter system (DPS) identification and adaptive filtering is presented, which culminates in a common statement of coupled autoregressive, moving-average expansion or parallel infinite impulse response configuration adaptive parameterization. The common restricted complexity filter objectives are seen as similar to the reduced-order requirements of the DPS expansion description. The interconnection presents the possibility of an exchange of problem formulations and solution approaches not yet easily addressed in the common finite dimensional lumped-parameter system context. It is concluded that the shared problems raised are nevertheless many and difficult.

Johnson, C. R., Jr.↗