Engineering topics

Baker, A. J.

Publications and source records attributed to Baker, A. J..

67 records · Page 4

NASA NTRS1976

Finite element solution of turbulent and reacting compressible three-dimensional flows

Results of detailed numerical evaluation of turbulent and reacting three-dimensional compressible flows are presented. These solutions were obtained using a finite element algorithm to solve the system of explicitly non-linear partial differential equations governing three-dimensional, confined unidirectional turbulent flow of a compressible, reacting fluid. Assessments are made of solution accuracy and convergence, including detailed comparisons to experimental data.

Baker, A. J.↗

NASA NTRS1975

The finite element method in low speed aerodynamics

The finite element procedure is shown to be of significant impact in design of the 'computational wind tunnel' for low speed aerodynamics. The uniformity of the mathematical differential equation description, for viscous and/or inviscid, multi-dimensional subsonic flows about practical aerodynamic system configurations, is utilized to establish the general form of the finite element algorithm. Numerical results for inviscid flow analysis, as well as viscous boundary layer, parabolic, and full Navier Stokes flow descriptions verify the capabilities and overall versatility of the fundamental algorithm for aerodynamics. The proven mathematical basis, coupled with the distinct user-orientation features of the computer program embodiment, indicate near-term evolution of a highly useful analytical design tool to support computational configuration studies in low speed aerodynamics.

Baker, A. J.↗

NASA NTRS1975

Analytical study of mixing and reacting three-dimensional supersonic combustor flow fields

An analytical investigation is presented of mixing and reacting hydrogen jets injected from multiple orifices transverse and parallel to a supersonic airstream. The COMOC computer program, based upon a finite-element solution algorithm, was developed to solve the governing equations for three-dimensional, turbulent, reacting, boundary-region, and confined flow fields. The computational results provide a three-dimensional description of the velocity, temperature, and species-concentration fields downstream of hydrogen injection. Detailed comparisons between cold-flow data and results of the computational analysis have established validity of the turbulent-mixing model based on the elementary mixing-length hypothesis. A method is established to initiate computations for reacting flow fields based upon cold-flow correlations and the appropriate experimental parameters of Mach number, injector spacing, and pressure ratio. Key analytical observations on mixing and combustion efficiency for reacting flows are presented and discussed.

Baker, A. J.↗

NASA NTRS1974

Finite element solution theory for three-dimensional boundary flows

A finite element algorithm is derived for the numerical solution of a three-dimensional flow field described by a system of initial-valued, elliptic boundary value partial differential equations. The familiar three-dimensional boundary layer equations belong to this description when diffusional processes in only one coordinate direction are important. The finite element algorithm transforms the original description into large order systems of ordinary differential equations written for the dependent variables discretized at node points of an arbitrarily irregular computational lattice. The generalized elliptic boundary conditions is piecewise valid for each dependent variable on boundaries that need not explicitly coincide with coordinate surfaces. Solutions for sample problems in laminar and turbulent boundary flows illustrate favorable solution accuracy, convergence, and versatility.

Baker, A. J.↗

NASA NTRS1974

A finite element solution algorithm for the Navier-Stokes equations

A finite element solution algorithm is established for the two-dimensional Navier-Stokes equations governing the steady-state kinematics and thermodynamics of a variable viscosity, compressible multiple-species fluid. For an incompressible fluid, the motion may be transient as well. The primitive dependent variables are replaced by a vorticity-streamfunction description valid in domains spanned by rectangular, cylindrical and spherical coordinate systems. Use of derived variables provides a uniformly elliptic partial differential equation description for the Navier-Stokes system, and for which the finite element algorithm is established. Explicit non-linearity is accepted by the theory, since no psuedo-variational principles are employed, and there is no requirement for either computational mesh or solution domain closure regularity. Boundary condition constraints on the normal flux and tangential distribution of all computational variables, as well as velocity, are routinely piecewise enforceable on domain closure segments arbitrarily oriented with respect to a global reference frame.

Baker, A. J.↗

NASA NTRS1974

COMOC: Three dimensional boundary region variant, programmer's manual

The three-dimensional boundary region variant of the COMOC computer program system solves the partial differential equation system governing certain three-dimensional flows of a viscous, heat conducting, multiple-species, compressible fluid including combustion. The solution is established in physical variables, using a finite element algorithm for the boundary value portion of the problem description in combination with an explicit marching technique for the initial value character. The computational lattice may be arbitrarily nonregular, and boundary condition constraints are readily applied. The theoretical foundation of the algorithm, a detailed description on the construction and operation of the program, and instructions on utilization of the many features of the code are presented.

Orzechowski, J. A.↗

NASA NTRS1974

COMOC: Three dimensional boundary region variant, theoretical manual and user's guide

The theoretical and mechanical structure of the computer program is presented along with guidance on adaptation of the code to solution of a particular problem. Sample solutions are discussed for several problems, especially with respect to solution accuracy and speed as a function of parameters under control of the user. Construction of input data decks for sample problems is discussed.

Baker, A. J.↗

NASA NTRS1974

Finite element solution algorithm for incompressible fluid dynamics

A finite element solution algorithm is established for the two-dimensional Navier-Stokes equations governing the transient motion of a viscous incompressible fluid, i.e., hydrodynamics. Dependent variable transformation renders the differential equation description uniformly elliptic. The finite element algorithm is established using the Galerkin criterion on a local basis within the Method of Weighted Residuals. It is unconstrained with respect to system linearity, computational mesh uniformity or solution domain closure regularity. The finite element matrices are established using a linear 'natural coordinate function' description. Computational solutions using the COMOC computer program illustrate the various features of the algorithm including recirculating flows.

Baker, A. J.↗

NASA NTRS1974

Nonlinear initial-boundary value solutions by the finite element method

The finite-element method is used to establish a numerical solution algorithm for the Navier-Stokes equations for two-dimensional flows of a viscous compressible fluid. Numerical experiments confirm the advection property for the finite-element equivalent of the nonlinear convection term for both unidirectional and recirculating flowfields. For linear functionals, the algorithm demonstrates good accuracy using coarse discretizations and h squared convergence with discretization refinement.

Baker, A. J.↗

NASA NTRS1973

A highly stable explicit integration technique for computational continuum mechanics

A user-oriented subroutine package is built around a highly stable explicit integration algorithm for solution of large order systems of ordinary differential equations, as result from discretization of initial-boundary value problems in continuum mechanics. Fast and accurate solutions, for problems in laminar and turbulent, two and three-dimensional viscous flow fields and multi-dimensional transient heat transfer, are presented using this algorithm, as embodied within a general purpose finite element computer program.

Baker, A. J.↗

NASA NTRS1972

A theoretical study of mixing downstream of transverse injection into a supersonic boundary layer

A theoretical and analytical study was made of mixing downstream of transverse hydrogen injection, from single and multiple orifices, into a Mach 4 air boundary layer over a flat plate. Numerical solutions to the governing three-dimensional, elliptic boundary layer equations were obtained using a general purpose computer program. Founded upon a finite element solution algorithm. A prototype three-dimensional turbulent transport model was developed using mixing length theory in the wall region and the mass defect concept in the outer region. Excellent agreement between the computed flow field and experimental data for a jet/freestream dynamic pressure ratio of unity was obtained in the centerplane region of the single-jet configuration. Poorer agreement off centerplane suggests an inadequacy of the extrapolated two-dimensional turbulence model. Considerable improvement in off-centerplane computational agreement occured for a multi-jet configuration, using the same turbulent transport model.

Baker, A. J.↗

NASA NTRS1972

Finite element solution for energy conservation using a highly stable explicit integration algorithm

Theoretical derivation of a finite element solution algorithm for the transient energy conservation equation in multidimensional, stationary multi-media continua with irregular solution domain closure is considered. The complete finite element matrix forms for arbitrarily irregular discretizations are established, using natural coordinate function representations. The algorithm is embodied into a user-oriented computer program (COMOC) which obtains transient temperature distributions at the node points of the finite element discretization using a highly stable explicit integration procedure with automatic error control features. The finite element algorithm is shown to posses convergence with discretization for a transient sample problem. The condensed form for the specific heat element matrix is shown to be preferable to the consistent form. Computed results for diverse problems illustrate the versatility of COMOC, and easily prepared output subroutines are shown to allow quick engineering assessment of solution behavior.

Baker, A. J.↗

NASA NTRS1972

COMOC: Thermal analysis variant. User's manual

The Thermal Analysis Variant of the COMOC (computational continuum mechanics) computer system solves problems involving transient heat conduction and convection in stationary continua spanning arbitrarily irregular two-dimensional and axisymmetric solution domains. COMOC is based upon a finite element solution algorithm for the energy equation, and solves for the transient nodal temperature distribution using a highly stable and automatic explicit integration procedure. COMOC is extensively user-oriented, requires minimal input, and no a priori knowledge concerning the stability character of the differential equation system. It can readily output computed data in user-specified format fields, that geometrically resemble the solution domain discretization (for rapid engineering evaluation). Complete information is provided for applying COMOC to a specific problem.

Bauer, A. M.↗