Engineering Papers⌕ Search

Engineering topics

Bae, Chulsung

Publications and source records attributed to Bae, Chulsung.

Solid-State Hydroxide Ion Conductivity in Silver(I) Oxide, Ag 2 O

Silver (I) oxide, Ag 2 O, precipitated as microcrystals by combining aqueous silver(I) nitrate and KOH solutions, was found to be a solid-state hydroxide ion conductor with ionic conductivity on the order of 10 -3 S/cm. The proton chemical shifts at 4.87 and -7.35 ppm measured by solid-state 1H-NMR experiments are attributed to water molecules and in-lattice OH - coordinated to silver, respectively. The lack of spinning sidebands around the 4.87 ppm peak indicates rapid reorientation on the NMR timescale, suggesting that the water molecules are adsorbed to the surface of the Ag 2 O crystals. Pulsed field gradient measurements gave similar diffusion coefficients (2 x 10 -7 cm 2 /s at 298K) for all three proton environments indicating chemical exchange between sites on the millisecond timescale. The activation energy for OH - diffusion measured by NMR (0.18 eV) was comparable to that obtained by conductivity measurements and density functional theory (DFT) electronic structure calculations. Furthermore, the calculated Pourbaix diagram of Ag 2 O is consistent with the slightly lower sample density observed in He pycnometry and thermogravimetric measurements.

25 ENERGY STORAGE↗

Bipolar Membranes With Controlled, Microscale 3D Junctions Enhance the Rates of Water Dissociation and Formation

A soft lithographic method is developed for making bipolar membranes (BPMs) with catalytic junctions formed from arrays of vertically oriented microscale cylinders. The membranes are cast from reusable polydimethylsiloxane (PDMS) molds made from silicon masters, which are fabricated on 2" to 4" wafer scales by nanosphere lithography. High-aspect-ratio junctions are made on a length scale similar to the thickness of optimized catalyst layers for water dissociation, creating a platform for probing the dual effects of catalysis and local electric field at the microscale BPM junction. Optimized polymer materials and nanoscale metal oxide catalysts are used in this study. 3D BPMs are tested under reverse and forward bias conditions, exhibiting superior performance relative to their 2D counterparts. Under forward bias in H 2- O 2 fuel cells, 3D BPMs achieve a current density of 1500 mA cm –2 , ≈7 times higher than 2D membranes made from the same materials.

25 ENERGY STORAGE↗

Quaternized polyaromatics for use in electrochemical devices

Disclosed herein in various embodiments are aryl-ether free polyaromatic polymers based on random copolymer architecture with two, three, or more aromatic ring components and methods of preparing those polymers. The polymers of the present disclosure can be used as ion exchange membranes, e.g., as anion exchange membranes, and ionomer binders in alkaline electrochemical devices.

Bae, Chulsung↗

Phosphate anion-quaternary ammonium ion pair coordinated polymer membranes

Ion exchange membranes materials according to the present disclosure exhibit improved conductivity at low and intermediate relative humidity without sacrificing mechanical strength. Polymers are provided that include a backbone with one or more aryl groups, a halocarbyl group, and a halocarbyl side chain attached to the backbone, wherein the halocarbyl side chain includes a halide separated from the backbone by a hydrocarbyl chain, a hydrocarbyl ring, or combinations thereof. The halide is substituted with a tertiary amine and halide anions are then exchanged with hydroxide anions. The polymers are then contacted with phosphoric acid, which is deprotonated by the hydroxide ions, forming anions which enhance interactions with adjacent quaternary ammonium groups and induce excess phosphoric acid molecules to cluster around those quaternary ammonium groups. The membranes exhibit negligible dopant leaching even at high relative humidity.

Bae, Chulsung↗

Thermally stable hydrocarbon-based anion exchange membrane and ionomers

An anion exchange membrane is composed of a copolymer of 1,1-diphenylethylene and one or more styrene monomers, such as 4-tert-butylstyrene. The copolymer includes a backbone substituted with a plurality of ionic groups coupled to phenyl groups on the backbone via hydrocarbyl tethers between about 1 and about 7 carbons in length. High-temperature conditions enabled by these copolymers enhance conductivity performance, making them particularly suitable for use in anion exchange membranes in fuel cells, electrolyzers employing hydrogen, ion separations, etc. The properties of the membranes can be tuned via the degree of functionalization of the phenyl groups and selection of the functional groups, such as quaternary ammonium groups. Several processes can be used to incorporate the desired ionic functional groups into the polymers, such as chloromethylation, radical bromination, Friedel-Crafts acylation and alkylation, sulfonation followed by amination, or combinations thereof.

Lee, Sangwoo↗

Aryl ether-free polymer electrolytes for electrochemical and energy devices

Anion exchange polymers (AEPs) play a crucial role in green hydrogen production through anion exchange membrane water electrolysis. The chemical stability of AEPs is paramount for stable system operation in electrolysers and other electrochemical devices. Given the instability of aryl ethercontaining AEPs under high pH conditions, recent research has focused on quaternized aryl ether-free variants. The primary goal of this review is to provide a greater depth of knowledge on the synthesis of aryl ether-free AEPs targeted for electrochemical devices. Synthetic pathways that yield polyaromatic AEPs include acid-catalysed polyhydroxyalkylation, metal-promoted coupling reactions, ionene synthesis via nucleophilic substitution, alkylation of polybenzimidazole, and Diels–Alder polymerization. Polyolefinic AEPs are prepared through addition polymerization, ring-opening metathesis, radiation grafting reactions, and anionic polymerization. Discussions cover structure–property–performance relationships of AEPs in fuel cells, redox flow batteries, and water and CO 2 electrolysers, along with the current status of scale-up synthesis and commercialization.

25 ENERGY STORAGE↗

Alkaline anion exchange membranes derived from diphenylethylene and co-monomer feedstock

The anion exchange membranes exhibit enhanced chemical stability and ion conductivity when compared with traditional styrene-based alkaline anion exchange membranes. A copolymer backbone is polymerized from a reaction medium that includes a diphenylalkylene and an alkadiene. The copolymer includes a plurality of pendant phenyl groups. The diphenyl groups on the polymer backbone are functionalized with one or more haloalkylated precursor substrates. The terminal halide from the precursor substrate can then be substituted with a desired ionic group. The diphenylethylene-based alkaline anion exchange membranes lack the α-hydrogens sharing tertiary carbons with phenyl groups from polystyrene or styrene-based precursor polymers, resulting in higher chemical stability. The ionic groups are also apart from each other by about 3 to 6 carbons in the polymer backbone, enhancing ion conductivity. These membrane are advantageous for use in fuel cells, electrolyzers employing hydrogen, ion separations, etc.

Lee, Sangwoo↗

Polymers and methods for their manufacture

Embodiments of the invention relate to a novel class of polymers with superior mechanical properties and chemical stability, as compared to known polymers. These polymers are particularly well suited for use in anion exchange membranes (AEMs), including those employed in fuel cells. Novel methods for the manufacture of these polymers are also described.

Bae, Chulsung↗

Ionic functionalization of aromatic polymers for ion exchange membranes

The electrochemical energy conversion system of the present disclosure includes an anode, a cathode, and an ion exchange membrane including a polymer having an aromatic polymer chain and an alkylated substrate including an alkyl chain, and at least one ionic group. The alkylated substrate is bound to at least one aromatic group in the polymer chain via Friedel-Crafts alkylation of the at least one aromatic group. The alkylation reaction utilizes a haloalkylated tertiary alcohol or a haloalkylated alkene as a precursor. In the presence of an acid catalyst, a carbocation is generated in the precursor which reacts with the aromatic rings of the polymer chain. The at least one ionic group is then replaced with a desired cationic or anionic group using a substitution reaction. The membranes exhibit advantageous stability achieved through a simplified and scalable reaction scheme.

Bae, Chulsung↗