Engineering Papers⌕ Search

Engineering topics

Averill, Frank

Publications and source records attributed to Averill, Frank.

Theoretical studies of Ir5Th and Ir5Ce nanoscale precipitates in Ir

Experimentally, it is known that very small amounts of thorium and/or cerium added to iridium metal form a precipitate, Ir5Th / Ir5Ce, which improves the high temperature mechanical properties of the resulting alloys. We demonstrate that there are low-energy configurations for nano-scale precipitates of these phases in Ir, and that these coherent arrangements may assist in producing improved mechanical properties. One precipitate/matrix orientation gives a particularly low interfacial energy, and a low lattice misfit. Nanolayer precipitates with this orientation are found to be likely to form, with little driving force to coarsen. The predicted morphology of the precipitates and their orientation with the matrix phase provide a potential experiment that could be used to test these predictions.

Morris, James R↗

The Graphene/Graphane Interface Energy and Implications for Defects

Recent theoretical work has shown that electronic properties of graphene sheets can be systematically modified by the partial hydrogenation of the sheets. Two possible perfect and distinct graphene/graphane interfaces (called zig-zag and armchair) have very different but potentially useful electronic properties which are nevertheless likely to be affected by the presence of defects. In an effort to evaluate their relative energetics and their potential for defects, the structure and energies of the zig-zag and armchair interfaces have been computed for infinite sheets of periodically alternating stripes of graphene and graphane ribbons of various widths. The presence of an interface causes significant strains in both the graphene and graphane regions, with both shear strains and area strains typically close to 1%. The associated large strain energies may lead to defects that relieve the strain but disrupt the lattice. The energies per unit length associated with the interfaces alone are approximately 0.12 eV/ for the zig-zag interface and 0.11 eV/ for the armchair. The large misfit strains and energies suggest that formation of strain-relieving defects at the interface should be highly favorable.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Observations on the Influence of Secondary Me Oxides Additives (Me=Si,Al, Mg) on the Microstructural Evolution and Mechanical Behavior of Silicon Nitride Ceramics Containing RE2O3 (RE=La, Gd, Lu)

The evolution of β Si3N4 microstructures is influenced by the adsorption of rare earth elements at grain surfaces and by the viscosity of the intergranular phases. Theoretical and STEM studies show that the RE atoms exhibit different tendencies to segregate from the liquid phase to grain surfaces and different binding strengths at these surfaces. When combined with MgO (or Al2O3) secondary additions, the rare earth additives are combined in low viscosity intergranular phases during densification and the α to β phase transformation and microstructural evolution are dominated by the RE adsorption behavior. On the other hand, a much higher viscosity intergranular phase forms when the RE2O3 are combined with SiO2. While the rare earth adsorption behavior remains the same, the phase transformation and microstructure are now dominated by Si3N4 solubility and transport in the high liquid phase. By understanding these additive effects, one can develop reinforced microstructures leading silicon nitride ceramics with greatly improved mechanical behavior.

36 MATERIALS SCIENCE↗

Lattice strain effects in graphane and partially-hydrogenated graphene sheets

This paper presents a brief review of recent developments in the studies of fully hydrogenated graphene sheets, also known as graphane, and related initial results on partially hydrogenated structures. For the fully hydrogenated case, some important discrepancies, specifically whether or not the graphene sheet expands or contracts upon hydrogenation, exist between published first-principles calculations, and between calculations and experiment. The lattice change has important effects on partially hydrogenated structures. In addition, calculations of the interfacial energy must carefully account for the strain energy in neighboring regions: For sufficiently large regions between interfaces, defects at the interface which relieve the strain may be energetically preferable. Our preliminary first-principles calculations of ribbon structures, with interfaces between graphane and graphene regions, indicate that the interfaces do indeed have substantial misfit strains. Similarly, our tight-binding simulations show that at ambient temperatures, segments of graphene sheets may spontaneously combine with atomic hydrogen to form regions of graphane. Here, small amounts of chemisorbed hydrogen distort the graphene layer, due to the lattice misfit, and may induce the adsorption of more hydrogen atoms.

08 HYDROGEN↗

Calculated Properties of Fully Hydrogenated Single Layers of BN, BC2N, and Graphene: Graphane and Its BN-Containing Analogues

Carbon is an attractive material for hydrogen adsorption, due to its light weight, variety of structures, and ability to both physisorb and chemisorb hydrogen. Recently, fully hydrogenated graphene layers ( graphane ) have been predicted to exist [J.O. Sofo et al., Phys. Rev. B 75, 15340 (2007)], and experimentally observed [D.C. Elias et al., Science 323, 610 (2009)]. In this work, we examine analogues of graphane, in particular BNH2 and BC2NH4. Unlike graphene, these materials have a band gap without hydrogenation. Our results indicate that the hydrogenation product of BN is metastable: the fully hydrogenated compound BNH2 is higher in energy than hexagonal BN sheets plus H2 molecules, in sharp contrast with graphane. We find that BC2NH4 is energetically very close to hexagonal BC2N+2H2 molecules. Furthermore our examination of the relative binding strengths of rows of symmetry related hydrogen atoms on BC2NH4shows that this compound is marginally higher in energy than BC2NH2 plus an H2 molecule, with the hydrogen atoms in BC2NH2 absorbed on the carbon sites. These remaining hydrogen atoms are not as strongly bound as in graphane, indicating that the average hydrogen chemisorption energy is controllable by changing the carbon content in the B-C-N layer.

08 HYDROGEN↗

An Embedded Cluster Self-Consistent Partial Wave Method using Divide and Conquer

An efficient approach to extending the spatial scale of electronic structure calculations is described in this work. The method is formulated as a combination of the interacting fragments concept of Harris [J. Harris, Phys. Rev. B 31, 1770 (1985)] and the D&C method of Yang [W. Yang, Phys. Rev. Lett. 66, 1438 (1991)], which recognizes the intrinsic locality of electron bonding and is devised to optimize the total electron charge density within an approximate representation of partitioned components. Beginning with a brief review of D&C concepts, we report results from this new method using the D&C as an embedding method for coupling an atomic cluster to its extended environment. The convergence properties as implemented within the self-consistent partial wave linear variational method (SCPW) are illustrated through various applications. In particular, results from a study of the adsorption of La atoms at the prism plane of -Si3N4 demonstrate the practicality of the SCPW using D&C as an embedding technique. PACS numbers: 71.15.Mb, 31.15.Ew, 31.50.Bc

Averill, Frank↗