Engineering topics

Auyeung, J.

Publications and source records attributed to Auyeung, J..

4 records

NASA NTRS1985

Ranging system which compares an object reflected component of a light beam to a reference component of the light beam

A system is described for measuring the distance to an object by comparing a first component of a light pulse that is reflected off the object with a second component of the light pulse that passes along a reference path of known length, which provides great accuracy with a relatively simple and rugged design. The reference path can be changed in precise steps so that it has an equivalent length approximately equal to the path length of the light pulse component that is reflected from the object. The resulting small difference in path lengths can be precisely determined by directing the light pulse components into opposite ends of a detector formed of a material that emits a second harmonic light output at the locations where the opposite going pulses past simultaneously across one another.

Mclauchlan, J. M.↗

NASA NTRS1985

Laser Rangefinder and Remote Profilometer

Proposed laser rangefinder and profilometer operates with precision of about 1mm at ranges of up to 100m. With scanning optics, device could track objects or accurately measure shapes of objects in field of view. New microprocessor-controlled design uses variable-length fiber-optic delay line as distance reference. New rangefinding method used in vision systems for industrial robots.

Mclauchlan, J. M.↗

NASA NTRS1981

Picosecond optical pulse generation at gigahertz rates by direct modulation of a semiconductor laser

We report the generation of picosecond pulses by the direct modulation of a buried heterostructure GaAlAs diode laser. Pulse width of 28 ps is achieved at a repetition frequency of 2.5 GHz. Pulse width dependence on the experimental parameters is described.

Auyeung, J.↗

NASA NTRS1981

Ultrashort pulse generation in semiconductor lasers

Techniques to generate picosecond optical pulses from semiconductor lasers are reviewed. Experimental methods and results of theoretical analysis of active modelocking are presented. It is shown that modelocking will achieve the shortest pulses; but the use of a cumbersome external cavity will probably limit its practical use. Short pulses produced by direct modulation such as gain switching are considerably broader than those obtained by passive modelocking. However, no external cavity is needed; and the simplicity of this method makes it important to be explored further. Recent experimental results are discussed where picosecond pulses from a buried heterostructure laser diode with ultrashort current pulses obtained from a comb generator are generated. Also, 28 ps pulses were obtained at 2.5 GHz repetition frequency, using the gain switching method. An analytical analysis based on the rate equations shows qualitative agreement with our experimental results.

Auyeung, J.↗