Engineering Papers⌕ Search

Engineering topics

Aslam, Tariq D.

Publications and source records attributed to Aslam, Tariq D..

Quantitative x ray phase contrast imaging of oblique shock wave–interface interactions

Oblique shock wave–interface interactions of gases and liquids have been extensively studied in shock tubes using optical methods to measure equation-of-state (EOS) parameters. However, this is difficult with solids due to their opaqueness to visible light. X ray phase contrast imaging (XPCI) has the penetrative strength to probe solids while still being sensitive to mass density and enhancing the visibility of material boundaries. We investigate the accuracy and repeatability of measuring the mean value of the average mass density (areal density divided by thickness) over region S (B S ) and flow deflection angle (θ) from XPCI images of a sample. To that end, a Hough transform-based method for measuring θ is developed. To measure B S , the XPCI image intensity probability density function (PDF) is modeled accounting for the spatial distribution of x ray energy, scintillator response, and pulse-to-pulse variation in the x ray intensity. In addition, a Monte Carlo-based algorithm for computing the B S PDF is developed. Both methods are validated on an impact-generated oblique shock wave interacting at a solid polymer-to-polymer interface. Furthermore this is accomplished through a comparison to hydrodynamic simulations using well-established EOS. Under the modeling framework for the XPCI image intensity, B S is computed with an accuracy of < 0.1% and precision of 3%–5%, while θ has an uncertainty of 0.2°, respectively. This shows that the XPCI-based model that is developed here could be an invaluable tool for high-fidelity testing of hydrodynamic models in shock polar configurations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

An analytic and complete equation of state for condensed phase materials

Analytic equations of state (EOS) are intended to reproduce theoretical and experimental data in a single phase portion of the thermodynamic space. We devise a complete and thermodynamically consistent model with four distinct features: (1) a reference isotherm that remains thermodynamically stable, (2) a flexible specific heat model based on a fourth-order rational polynomial, (3) a Grüneisen parameter that depends on specific volume and temperature, and (4) pressure and internal energy functions that can be inverted analytically in temperature. The model aims to improve the accuracy of existing equations of state while remaining computationally efficient. To demonstrate its features, we include calibrations for single-crystal pentaerythritol tetranitrate (PETN), liquid nitromethane (NM), and hexagonal close-packed beryllium (Be) metal. The parameter optimization uses the specific heat capacity, Grüneisen parameter, and static compression curves obtained from density functional theory for the crystalline solids and molecular dynamics simulations for liquid NM. We also present a velocity autocorrelation function that yields accurate phonon densities of states for the EOS calibration from the molecular dynamics trajectories. Each of the three calibrations is constrained to enforce the ambient state from experimental measurements and validated against experimental Hugoniot data from multiple sources. We also include one-dimensional hydrodynamic simulations of the isentropic compression experiments for beryllium conducted at the Z facility.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evaluation of thermodynamic closure models for partially reacted two-phase mixture of condensed phase explosives

One of the key fundamental issues that is crucial in the continuum modeling of reactive flow phenomena is the thermodynamically consistent description of reaction mixture properties. To define the mixture properties, thermodynamic closure rules that relate the properties of the individual reaction components to the mixture properties are required. In the context of reactive two-phase modeling approaches, various strategies to define the thermodynamic closures have been adopted such as pressure temperature (PT) equilibrium between the individual reaction components, pressure (specific) volume (PV) equilibrium, etc. The choice of closure rules determines the relative distribution of specific volume and energy across the reaction components that comprise the mixture. Therefore, depending on the choice of the closure, the mixture thermodynamic behavior can vary. The present work examines the effect of different closure approaches on the thermodynamic properties of the reaction mixture. The analysis is performed for a condensed phase HMX (octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine) based plastic bonded explosive (PBX) 9501 explosive using four different thermodynamic closures, viz., PT equilibrium, PV equilibrium, volume temperature (VT) equilibrium, and pressure (P) equilibrium with reactants on an isentrope. Furthermore, the relative variations in the thermodynamic properties of the mixture are analyzed and compared under both compression and expansion loading regimes. It is shown that out of the four closure models, only PT equilibrium and P equilibrium closures lead to a thermodynamically accurate description of the mixture under both compression and expansion.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A robust three-parameter reference curve for condensed phase materials

Many isothermal equations of state lead to numerical problems under tension conditions due to negative bulk modulus. We summarize the properties of four existing models and devise a continuous non-piecewise reference curve to address this issue. The final functional form contains three fitting parameters that are directly related to the bulk modulus and its pressure derivative at the reference state and at infinite pressures. We also include bounds that guarantee the monotonicity of its pressure derivative in all volume space. To demonstrate the qualitative features of each isotherm, we conduct calibrations against experimental data for cyclotetramethylene tetranitramine, magnesium oxide, gold, and platinum. Furthermore, pressure residuals and root mean square deviations show that the proposed functional form is capable of adequately fitting the data compared to other three-parameter models.

36 MATERIALS SCIENCE↗

Super-time-stepping schemes for parabolic equations with boundary conditions

In this work, we present a super-time-stepping scheme for numerically solving parabolic partial differential equations with Dirichlet boundary conditions (BC). Using the general Forward Euler scheme, one can show that by taking varying step sizes there is the potential of propagating the solution forward in time by a greater amount than with uniform step sizes, while maintaining the same order of accuracy. As shown in previous works, if one further requires that the scheme have the Convex Monotone Property (CMP), then there exists a scheme which results in linear, monotone stability of the solution. This monotone stability is highly desirable in many physical situations, such as thermal diffusion, where the physical system will not oscillate, but will behave monotonically. However, the schemes devised in previous works do not include situations that have a boundary condition, and the inclusion of boundary conditions will henceforth be our focus. It is shown that a particular Runge-Kutta-Gegenbauer class of schemes [5] will maintain the CMP even in the presence of Dirichlet BC.

97 MATHEMATICS AND COMPUTING↗

Dynamic compaction of nickel powder examined by x-ray phase contrast imaging

Understanding the shock response of porous, granular materials is important for many scientific applications. In this work, a propagation-based x-ray phase contrast imaging technique was used to examine the shock compaction response of Ni powder (particle size: 30 and 45 µm), encapsulated in PMMA cylinders, in situ and in real time. The propagating shock wave in the PMMA cylinder and the deformation of the Ni powder column were recorded, but the compaction wave in the Ni powder could not be observed due to insufficient penetration of x-ray photons through the sample. The overall shape of the deformed Ni column downstream of the PMMA shock looked qualitatively similar for both particle sizes: it deformed inward and then outward similar to a converging-diverging nozzle, followed by a ‘mushroom’-like structure at the impact face. A preliminary analysis of our data using shock-polar method provided insight into the observed shock and flow deflection angles at the PMMA/Ni interface, and permitted evaluation of the Ni powder EOS used in this work.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evolution of Carbon Clusters in the Detonation Products of the Triaminotrinitrobenzene (TATB)-Based Explosive PBX 9502

Here, the detonation of carbon-rich high explosives yields solid carbon as a major constituent of the product mixture and, depending on the thermodynamic conditions behind the shock front, a variety of carbon allotropes and morphologies may form and evolve. We applied time-resolved small angle x-ray scattering (TR-SAXS) to investigate the dynamics of carbon clustering during detonation of PBX 9502, an explosive composed of triaminotrinitrobenzene (TATB) and 5 wt% fluoropolymer binder. Solid carbon formation was probed from 0.1 to 2.0 μs behind the detonation front and revealed rapid carbon cluster growth which reached a maximum after ~200 ns. The late-time carbon clusters had a radius of gyration of 3.3 nm which is consistent with 8.4 nm diameter spherical particles and matched particle sizes of recovered products. Simulations using a clustering kinetics model were found to be in good agreement with the experimental measurements of cluster growth when invoking a freeze-out temperature, and temporal shift associated with the initial precipitation of solid carbon. Product densities from reactive flow models were compared to the electron density contrast obtained from TR-SAXS and used to approximate the carbon cluster composition as a mixture of 20% highly ordered (diamond-like) and 80% disordered carbon forms, which will inform future product equation of state models for solid carbon in PBX 9502 detonation product mixtures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The reactants equation of state for the tri-amino-tri-nitro-benzene (TATB) based explosive PBX 9502

The response of high explosives (HEs), due to mechanical and/or thermal insults, is of great importance for both safety and performance. A major component of how an HE responds to these stimuli stems from its reactant equation of state (EOS). In this study, the tri-amino-tri-nitro-benzene based explosive PBX 9502 is investigated by examining recent experiments. Furthermore, a complete thermal EOS is calibrated based on the functional form devised by Wescott, Stewart, and Davis [J. Appl. Phys. 98, 053514 (2005)]. It is found, by comparing to earlier calibrations, that a variety of thermodynamic data are needed to sufficiently constrain the EOS response over a wide range of thermodynamic state space. Included in the calibration presented here is the specific heat as a function of temperature, isobaric thermal expansion, and shock Hugoniot response. As validation of the resulting model, isothermal compression and isentropic compression are compared with recent experiments.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

High-order shock-fitted detonation propagation in high explosives

In this paper, a highly accurate numerical shock and material interface fitting scheme composed of fifth-order spatial and third- or fifth-order temporal discretizations is applied to the two-dimensional reactive Euler equations in both slab and axisymmetric geometries. High rates of convergence are not typically possible with shock-capturing methods as the Taylor series analysis breaks down in the vicinity of discontinuities. Furthermore, for typical high explosive (HE) simulations, the effects of material interfaces at the charge boundary can also cause significant computational errors. Fitting a computational boundary to both the shock front and material interface (i.e. streamline) alleviates the computational errors associated with captured shocks and thus opens up the possibility of high rates of convergence for multi-dimensional shock and detonation flows. Several verification tests, including a Sedov blast wave, a Zel'dovich–von Neumann–Döring (ZND) detonation wave, and Taylor–Maccoll supersonic flow over a cone, are utilized to demonstrate high rates of convergence to nontrivial shock and reaction flows. Comparisons to previously published shock-capturing multi-dimensional detonations in a polytropic fluid with a constant adiabatic exponent (PF-CAE) are made, demonstrating significantly lower computational error for the present shock and material interface fitting method. For an error on the order of 10 m / s , which is similar to that observed in experiments, shock-fitting offers a computational savings on the order of 1000. In addition, the behavior of the detonation phase speed is examined for several slab widths to evaluate the detonation performance of PBX 9501 while utilizing the Wescott–Stewart–Davis (WSD) model, which is commonly used in HE modeling. It is found that the thickness effect curve resulting from this equation of state and reaction model using published values is dramatically more steep than observed in recent experiments. Utilizing the present fitting strategy, in conjunction with a nonlinear optimizer, a new set of reaction rate parameters improves the correlation of the model to experimental results. In conclusion, this new model is tested against two dimensional slabs as a validation test.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

A stabilized Runge–Kutta–Legendre method for explicit super-time-stepping of parabolic and mixed equations

Parabolic partial differential equations appear in several physical problems, including problems that have a dominant hyperbolic part coupled to a sub-dominant parabolic component. Explicit methods for their solution are easy to implement but have very restrictive time step constraints. Implicit solution methods can be unconditionally stable but have the disadvantage of being computationally costly or difficult to implement. Super-time-stepping methods for treating parabolic terms in mixed type partial differential equations occupy an intermediate position. In such methods each superstep takes “s” explicit Runge–Kutta-like time-steps to advance the parabolic terms by a time-step that is s{sup 2} times larger than a single explicit time-step. The expanded stability is usually obtained by mapping the short recursion relation of the explicit Runge–Kutta scheme to the recursion relation of some well-known, stable polynomial. Prior work has built temporally first- and second-order accurate super-time-stepping methods around the recursion relation associated with Chebyshev polynomials. Since their stability is based on the boundedness of the Chebyshev polynomials, these methods have been called RKC1 and RKC2. In this work we build temporally first- and second-order accurate super-time-stepping methods around the recursion relation associated with Legendre polynomials. We call these methods RKL1 and RKL2. The RKL1 method is first-order accurate in time; the RKL2 method is second-order accurate in time. We verify that the newly-designed RKL1 and RKL2 schemes have a very desirable monotonicity preserving property for one-dimensional problems – a solution that is monotone at the beginning of a time step retains that property at the end of that time step. It is shown that RKL1 and RKL2 methods are stable for all values of the diffusion coefficient up to the maximum value. We call this a convex monotonicity preserving property and show by examples that it is very useful in parabolic problems with variable diffusion coefficients. This includes variable coefficient parabolic equations that might give rise to skew symmetric terms. The RKC1 and RKC2 schemes do not share this convex monotonicity preserving property. One-dimensional and two-dimensional von Neumann stability analyses of RKC1, RKC2, RKL1 and RKL2 are also presented, showing that the latter two have some advantages. The paper includes several details to facilitate implementation. A detailed accuracy analysis is presented to show that the methods reach their design accuracies. A stringent set of test problems is also presented. To demonstrate the robustness and versatility of our methods, we show their successful operation on problems involving linear and non-linear heat conduction and viscosity, resistive magnetohydrodynamics, ambipolar diffusion dominated magnetohydrodynamics, level set methods and flux limited radiation diffusion. In a prior paper (Meyer, Balsara and Aslam 2012 [36]) we have also presented an extensive test-suite showing that the RKL2 method works robustly in the presence of shocks in an anisotropically conducting, magnetized plasma.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Verification of 2-D Detonation Shock Dynamics in conjunction with Los Alamos Lagrangian hydrocode

As the latest version of the fast-tube Detonation Shock Dynamics (DSD) solver is linked with the Los Alamos Lagrangian hydrocode, verification problems from a 2006 DSD report (LA-14277) have been duplicated with some of the verification criteria changed to more quantitative ones. The observed error convergence is as good as or better than reported in, quite possibly due to the careful treatment of floating point numbers to ensure that their precision level is maintained throughout the code. This report duplicates the three sample verification problems in LA-14277 using the Los Alamos ASC Lagrangian hydrocode (FLAG), official release of 3.2 Alpha6 with a few modifications. This version of FLAG is linked with the latest fast-tube Detonation Shock Dynamics (DSD) version beta 2 solver released in 2011 as part of the LanlDSD software product. New verification criteria are used for the arcwave problem where two specific locations are chosen for burn arrival time comparison. For this report FLAG's internal driver code prepares the distance function ({Psi}) and material ID fields from its hydro setup, instead of the stand-alone driver that is being utilized by the other LANL hydrocodes currently interfaced to LanlDSD. As it is implemented in version 3.2 Alpha6, the {Psi} and material ID fields and other parameters are passed from FLAG to the DSD solver directly, and the burn table is directly passed back to FLAG as part of the calling arguments. The burn-front arrival time 'exact' solutions, mentioned in the sequel for the rate-stick and 'arc-wave' problems, are computed using a pair of special-purpose Fortran codes provided by Aslam. In each case an ansatz for the form of the solution is made in which the radius from the detonator center point is used as the independent space coordinate. This leads to a simplified, problem-specific, 1D form of the governing equation. This equation is solved using 2nd-order spatial differencing and the forward Euler method on a very fine temporal and geometric mesh. The boundary conditions are handled exactly at the correct location, with second order accuracy. Care has been taken to ensure that this solution is fully converged.

36 MATERIALS SCIENCE↗

Detonation Shock Dynamics (DSD) Calibration for LX-17

The goal of this report is to summarize the results of a Detonation shock dynamics (DSD) calibration for the explosive LX-17. Considering that LX-17 is very similar to PBX 9502 (LX-17 is 92.5% TATB with 7.5% Kel-F 800 binder, while PBX 9502 is 95% TATB with 5% Kel-F 800 binder), we proceed with the analysis assuming many of the DSD constants are the same. We only change the parameters $D_{CJ}, B$ and $\bar{C}_6$ ($\bar{C}_6$ controls the how $D_{CJ}$ changes with pressing density). The parameters $D_{CJ}$ and $\bar{C}_6$ were given by Josh Coe and Sam Shaw's EOS. So, only B was optimized in fitting all the calibration data. This report first discusses some general DSD background, followed by a presentation of the available dataset to perform the calibration, and finally gives the results of the calibration and draws some conclusions. A DSD calibration of LX-17 has been conducted using the existing diameter effect data and shock shape records. The new DSD fit is based off the current PBX 9502 calibration and takes into account the effect of pressing density. Utilizing the PBX 9502 calibration, the effects of initial temperature can also be taken into account.

36 MATERIALS SCIENCE↗