Engineering Papers⌕ Search

Engineering topics

Arvidson, R. E.

Publications and source records attributed to Arvidson, R. E..

At least 127 records · Page 7

Structure of the Saint Francois Mountains and surrounding lead belt, south east Missouri: Inferences from thermal IR and other data sets

Several digital data sets were registered to a common base map for southern Missouri. These registered data sets were examined in an attempt to improve our understanding of the crustal structure and the relationships between structure and Pb-Zn-Cu, Fe, Mn, and Ba ores in the area. Data included land station reading of gravity, geologic data, and Heat Capacity Mapping Mission (HCMM) images. The HCMM day infrared (IR) images of Missouri displayed linear features, which parallel a newly discovered NW-SE trending Bouguer gravity low. The structural pattern over the gravity low suggests vertical uplift of the low density crust via isostatic readjustment and consequent fracturing of the Paleozoic sedimentary cover. The presence of a gravity low is interesting because rifts are often sites of extensive mineralization. The HCMM thermal data were also examined in conjunction with digital topography, land use, and LANDSAT MSS data to understand the phenomena that produce linears on the HCMM day IR images. Finally, the kinds of information that can be extracted from day-night IR pairs are discussed.

Arvidson, R. E.↗

Topography, surface properties, and tectonic evolution

Differences in atmospheric composition, atmospheric and lithospheric temperature, and perhaps mantle composition, suggest that the rock cycle on Venus is not similar to the earth's. While radar data are not consistent with a thick, widespread and porous regolith like that of the moon, wind-transported regolith could be cemented into sedimentary rock that would be indistinguishable from other rocks in radar returns. The elevation spectrum of Venus is strongly unimodal, in contrast to the earth. Most topographic features of Venus remain enigmatic. Two types of tectonic model are proposed: a lithosphere too thick or buoyant to participate in convective flow, and a lithosphere which, in participating in convective flow, implies the existence of plate tectonics. Features consistent with earth-like plate tectonics have not been recognized.

Mcgill, G. E.↗

Digital image processing applied to analysis of geophysical and geochemical data for southern Missouri

Digital image-processing techniques have been used to analyze a variety of geophysical and geochemical map data covering southern Missouri, a region with important basement and strata-bound mineral deposits. Gravity and magnetic anomaly patterns, which have been reformatted to image displays, indicate a deep crustal structure cutting northwest-southeast through southern Missouri. In addition, geologic map data, topography, and Landsat multispectral scanner images have been used as base maps for the digital overlay of aerial gamma-ray and stream sediment chemical data for the 1 x 2-deg Rolla quadrangle. Results indicate enrichment of a variety of elements within the clay-rich alluvium covering many of the interfluvial plains, as well as a complicated pattern of enrichment for the sedimentary units close to the Precambrian rhyolites and granites of the St. Francois Mountains.

Guinness, E. A.↗

Two Mars years of surface changes seen at the Viking Landing sites

An analysis of the spectrophotometric properties of the new dust deposited at the Viking Lander 1 site indicates that the new deposits are the same as the bright red material that only partially covered the site at the beginning of the mission. Certain areas of the Viking 1 site also showed an increase in contrast during the second year. The contrast increase is thought to be due to the partial removal of the recently deposited dust cover by high-velocity winds. What is more, a small soil slump occurred near the base of a boulder lying about 25 m from the lander. It is noted that whereas no obvious erosion has been detected at the Viking 2 site, periodic removal of the dust cover at this site is implied by the abundance of rocks at the site.

Guinness, E. A.↗

Classification of surface units in the equatorial region of Mars based on Viking Orbiter color, albedo, and thermal data

Clusters corresponding to mappable surface units are sought in Viking Orbiter color, albedo, and thermal inertia data for the equatorial region of Mars. A principal components analysis indicated that 84% of the variance within the data for this region can be carried along two vector directions which typify the dominant trend of Martian surface materials. These dominant trends were deemphasized by stretching the data from a five-dimensional elliptical swarm into a hypersphere, through the use of principal component techniques. The decorrelated data were then plotted in a triangle diagram with red/violet, albedo and thermal inertia apices to facilitate inherent cluster discrimination. As many as eight clusters can be identified, with important mixing between them. The three major clusters consist of red and grey material extremes, along with intermediate value materials.

Arvidson, R. E.↗

Identification of a precambrian rift through Missouri by digital image processing of geophysical and geological data

A newly discovered feature in the midcontinent - a gravity low that begins at a break in the midcontinent gravity high in SE Nebraska, extends across Missouri in a NW-SE direction, and intersects the Mississippi Valley graben to form the Pascola arch - is discussed. The anomaly varies from 120 to 160 km in width, extends approximately 700 km, and is best expressed in southern Missouri, where it has a Bouguer amplitude of about -34 mGal. It is noted that the magnitude of the anomaly cannot be explained on the basis of a thickened section of Paleozoic sedimentary rock. The gravity data and the sparse seismic refraction data for the region are found to be consistent with an increased crustal thickness beneath the gravity low. It is thought that the gravity anomaly is probably the present expression of a failed arm of a rifting event, perhaps one associated with the spreading that led to or preceded formation of the granite and rhyolite terrain of southern Missouri.

Guinness, E. A.↗

BIRP - A way to search through image engineering data

Several hundred thousand images have been returned by planetary missions and by earth-orbiting satellites. Locating specific images for study based on engineering data can be cumbersome and time consuming if done manually. BIRP, a FORTRAN program for small computers, is designed to quickly search through catalogs of image engineering data. A description of the desired images is entered and the BIRP program finds the images meeting the requirements. A videodisk player or microfiche reader may be controlled by BIRP so that images can be viewed immediately after a search. A search through 50,000 images on a single parameter takes less than 1 min on a minicomputer. Data for each parameter is stored in a separate file so that the number of files and thus the storage space required may be varied to fit computers with different storage capacities. Most modern minicomputers with FORTRAN compilers and an 8-bit byte variable type may use BIRP with minor modifications to the program.

Bolef, L. K.↗

Structure of the Saint Francois Mountains and surrounding lead belt, S.E. Missouri: Inference from thermal IR and other data sets

Progress in the preparation of manuscripts on the discovery of a Precambrian rift running NW-SE through Missouri as seen in free air and Bouguer gravity anomalies and in HCMM data, and on digital image processing of potential field and topographic data on the rift is reported. Copies of the papers are attached. Contrast-enhanced HCMM images that have been transformed to Mercator projections are presented. Shaded relief map overlays of thermal and apparent thermal inertia images used as part of a masers thesis examining correlations between HCMM data products, linears, and geologic units are presented. Progress in examination of the difference in information content of daytime infrared, night time infrared, albedo, and thermal inertia images and their application to he identification of linears not directly controlled by topography is reported. Thermal infrared and albedo data were coded as hue, saturation and brightness values to generate a color display, which is included.

Arvidson, R. E.↗

Image processing applied to gravity and topography data covering the continental United States

The applicability of fairly standard image processing techniques to processing and analyzing large geologic data sets in addressed. Image filtering techniques were used to interpolate between gravity station locations to produce a regularly spaced data array that preserves detail in areas with good coverage, and that produces a continuous tone image rather than a contour map. Standard image processing techniques were used to digitally register and overlay topographic and gravity data, and the data were displayed in ways that emphasize subtle but pervasive structural features. The potential of the methods is illustrated through a discussion of linear structures that appear in the processed data between the midcontinent gravity high and the Appalachians.

Arvidson, R. E.↗

Pattern, age, and origin of structural features within the Ozark plateau and the relationship to ore deposits

Topography and gravity anomaly images for the continental United States were constructed. Evidence was found based on gravity, remote sensing data, the presence, trend, and character of fractures, and on rock type data, for a Precambrian rift through Missouri. The feature is probably the failed arm of a triple junction that existed prior to formation of the granite-rhyolite terrain of southern Missouri.

Arvidson, R. E.↗

Structure of the St. Francois Mountains and surrounding lead belt, S. E. Missouri: Inferences from thermal IR and other data sets

Day-IR, day-visible, and night-IR image data sets were analyzed. All three images were contrast enhanced, using a linear stretch. The night-IR image was destriped using a box-car filtering approach. Apparent thermal inertia images were generated from the data. The enhanced data and the apparent thermal inertia image were also registered and overlayed onto shaded relief images depicting topography and onto a colored version of the Missouri geologic map. The combination of the apparent thermal inertial image and the shaded relief map proved to have the greatest discriminability in terms of portraying linear features. The reason seems to be that the vegetation canopy on the Ozark Plateau is different topography, tend to emphasize subtle topographic effects.

Arvidson, R. E.↗

Structure of the St. Francois Mountains and surrounding lead belt, S. E. Missouri: Inferences from thermal IR and other data sets

Heat Capacity Mapping Mission (HCMM) in the form of an apparent thermal inertia image were merged with shaded relief maps and Bouguer gravity maps. The HCMM data show that the dominant structural grain in Missouri strikes in a northwesterly direction. The strike is the same as a major basement fault or flexure identified on the basis of gravity images.

Arvidson, R. E.↗

Structure of the midcontinent basement. Topography, gravity, seismic, and remote sensing

Some 600,000 discrete Bouguer gravity estimates of the continental United States were spatially filtered to produce a continuous tone image. The filtered data were also digitally painted in color coded form onto a shaded relief map. The resultant image is a colored shaded relief map where the hue and saturation of a given image element is controlled by the value of the Bouguer anomaly. Major structural features (e.g., midcontinent gravity high) are readily discernible in these data, as are a number of subtle and previously unrecognized features. A linear gravity low that is approximately 120 to 150 km wide extends from southeastern Nebraska, at a break in the midcontinent gravity high, through the Ozark Plateau, and across the Mississippi embayment. The low is also aligned with the Lewis and Clark lineament (Montana to Washington), forming a linear feature of approximately 2800 km in length. In southeastern Missouri the gravity low has an amplitude of 30 milligals, a value that is too high to be explained by simple valley fill by sedimentary rocks.

Guinness, E. A.↗

Effects of lateral resolution on the identification of volcanotectonic provinces on earth and Venus

In an attempt to learn what volcanotectonic features can still be discerned in continental and oceanic areas of the earth when topographic data are degraded to simulate the data sampled by the Pioneer-Venus altimeter, two digital topographic data sets (the 30-second continental U.S. altitude data and the 30 x 30 nautical mile bathymetry data for the North Pacific) were degraded and displayed in the same way as the altimeter data from Venus. The Appalachians were reduced to a gentle swell, with a wavelength of 300 km, and a height of 500 m. The Cordillera was seen as a broad swell, 2500 km wide, and about 2 km high. The east Pacific rise, east Pacific fractures, seamount chains, the Hawaiian swell, and most trenches were discernible in the degraded Pacific data; whereas rises, transforms, seamount chains, and trenches were not seen in the Venus data, even after corrections were made for the higher surface temperature and the absence of oceans on Venus. It was concluded that a plate tectonic regime, similar to earth's does not currently appear to exist on Venus. As shown by the Cordillera data, the Pioneer-Venus information is not of sufficiently high quality to discern whether the highlands of Venus preserve evidence for orogenic events related to plate tectonics.

Arvidson, R. E.↗

Martian thermal history, core segregation, and tectonics

A series of calculated thermal histories of Mars is presented, and their possible relation to surface tectonic history is discussed. The models include convective heat transport through an empirical approximation, and heating by radioactivity and core segregation. Initial temperature and the timing and duration of core segregation are treated as free parameters. The initial temperature is the main determinant of Martian thermal evolution: as it is varied from 20 to 100% of the present mean temperature, the maximum in surface heat flux moves from very recent to very early in Martian history. For the latter cases, the details of core segregation control the detailed timing of a peak in the thermal flux that exceeded 100 mW/sq m. It is suggested that the early disruption of cratered terrain crust in the northern hemisphere and subsequent volcanic resurfacing may have been related to core segregation. This would be consistent with a scenario in which an early period of core segregation generated a marked peak in the thermal flux that may have led to extensive partial melting and volcanism. This scenario would require Mars to have had an initial mean temperature comparable to the present value.

Davies, G. F.↗

A post-Viking view of Martian geologic evolution

The geologic evolution of Mars is reviewed on the basis of data obtained by the Viking and previous missions. Current knowledge of the mean density and moment of inertia factor of Mars are surveyed and the constraints these data place on the structure and composition of the interior are discussed. Inferences drawn about Martian surface composition and mineralogy from lava modeling studies, in situ analyses, remote sensing observations, flow morphometry and investigations of weathering under Martian conditions are presented, and data on the topography, gravity field and structural features are considered in relation to the structure and deformational history of the crust. The temporal and spatial distribution of volcanic units are considered as a constraint on the thermal evolution of the planet, and other constraints on Martian thermal history, such as magnetic field data, are reviewed. Finally, the volatile inventory of Mars is discussed based on elemental and isotopic atmospheric abundance data and geological constraints on H2O and CO2 abundances.

Arvidson, R. E.↗

BIRP: Software for interactive search and retrieval of image engineering data

Better Image Retrieval Programs (BIRP), a set of programs to interactively sort through and to display a database, such as engineering data for images acquired by spacecraft is described. An overview of the philosophy of BIRP design, the structure of BIRP data files, and examples that illustrate the capabilities of the software are provided.

Arvidson, R. E.↗