Engineering PapersSearch

Engineering topics

Arora, Nitin

Publications and source records attributed to Arora, Nitin.

At least 19 records

System Engineering a Solar Thermal Propulsion Mission Concept for Rapid Interstellar Medium Access

The interstellar medium (ISM) represents the next frontier in space exploration, with many new discoveries to be made. The challenge, being so far away from Earth, the ISM requires many decades to reach. To advance our knowledge of what exists beyond our Solar System, new approaches for rapid access are required. One such approach is solar thermal propulsion (STP). The approach uses several Venus and Earth gravity assists to fly to Jupiter and use its gravity well to dive towards the Sun. Approaching within 3 solar radii a perihelion burn would be performed, maximizing the spacecraft’s ΔV to achieve high Solar System escape velocities. A unique aspect of the STP mission concept is that the Sun is not only used as a gravity well for an Oberth manoeuvre, but also to heat the fuel to ultra-high-temperatures (>3000 K), enabling a monopropellant burn with high specific impulse (Isp). Prior preliminary studies indicated escape velocities of over 20 astronomical unit (AU)/yr would be possible. An in-depth modelling exercise was undertaken to determine how such a system would perform. The model in this paper showed the current STP design is capable of providing just under 9±1 AU/yr, but there are many technology developments that could increase escape velocity. The technologies vary from items that could be implemented in the near term, like turbo-pumps driven by the hydrogen, to items requiring more extensive development programs like thin coatings which do not erode in superheated hydrogen. After reviewing the STP approach, and comparing it to a solid rocket motor (SRM), it was found that with currently available technology, SRM outperforms STP with an escape velocity of approximately 10-12 AU/yr. However, future advances in heat exchanger lining materials, turbo pumps, and advanced heat exchanger geometries may enable solar thermal propulsion to provide higher escape velocities, providing one of the fastest ways to exit the solar system. Ultimately, if all technology paths could be implemented with minimal side effects, the performance in a best-case scenario could reach up to 16 AU/yr.

Alkalai, Leon

Uranus and Neptune Missions: A Study in Advance of the Next Planetary Science Decadal Survey

The ice giant planets, Uranus and Neptune, represent an important and relatively unexplored class of planet. Most of our detailed information about them comes from fleeting looks by the Voyager 2 spacecraft in the 1980s. Voyager, and ground-based work since then, found that these planets, their satellites, rings, and magnetospheres, challenge our understanding of the formation and evolution of planetary systems. We also now know that Uranus- Neptune size planets are common around other stars. These are some of the reasons ice giant exploration was a high priority in NASA's most recent Planetary Science Decadal Survey. In preparation for the next Decadal Survey, NASA, with ESA participation, conducted a broad study of possible ice giant missions in the 2024–2037 timeframe. This paper summarizes the key results of the study, and addresses questions that have been raised by the science community and in a recent NASA review. Foremost amongst these are questions about the science objectives, the science payload, and the importance of an atmospheric probe. The conclusions of the NASA/ESA study remain valid. In particular, it is a high priority to send an orbiter and atmospheric probe to at least one of the ice giants, with instrumentation to study all components of an ice giant system. Uranus and Neptune are found to be equally compelling as science targets. The two planets are not equivalent, however, and each system has things to teach us the other cannot. An additional mission study is needed to refine plans for future exploration of these worlds.

Ice giant

SmallSat missions enabled by paired low-thrust hybrid rocket and low-power long-life Hall thruster

The capabilities of a SmallSat-class spacecraft targeting the outer solar system and using a combined chemical and electric propulsion system are explored. The development of compact hybrid rockets has enabled high-thrust engines to be packaged tightly enough to fit on cubesat and SmallSat spacecraft. These hybrid rockets provide 10’s-100 N of thrust depending on the propellant load & >300 s of specific impulse and have been demonstrated in both ambient and vacuum environments. Advancements in low-power long-life Hall thruster technologies have provided the potential for significantly greater propellant throughputs, enabling their use as a primary propulsion element on interplanetary spacecraft. In a recent characterization test campaign, the MaSMi-DM Hall thruster demonstrated power throttling from 150 – 1000 W with >1500 s of specific impulse available at >500 W and >40% total thrust efficiency available at >300 W; peak values of 1940 s and 53% were observed. A notional low-mass spacecraft employing a combined hybrid rocket and low-power electric propulsion system was designed and used for mission concept analysis targeting the outer solar system. Using an imposed wet mass limit of 400 kg, mission trajectories to Saturn and Uranus were generated. Orbit capture with >40% of the launch mass was shown to be possible at either target, with mission transfer times of 7.5 years and 13.5 years for Saturn and Uranus, respectively. Significant follow-on mission activities near Saturn (e.g. to Titan & Enceladus) were also possible by carrying extra propellant mass while remaining under the total wet mass limit.

Karp, Ashley C.

Do You See What I See? Interactive Visualization of Mission Design and Navigation

Mission Design and Navigation (MDNav) is an intensive process requiring advanced computational resources, expert human intuition, and many successive human-in-the-loop iterations to converge on acceptable trajectory designs or navigation solutions. The current bottleneck in MDNav is not the underlying computational algorithms but the human cognitive capacity to prune through a multitude of simulated results to select high-value candidates. One approach to alleviate this burden is through the judicious application of visualizations that allow humans to interactively filter data in multiple dimensions to reveal salient patterns and highlight divergences. When designed efficiently, such interactive visualizations should aid human operators to get familiar with data faster, visually observe correlations, and communicate findings more effortlessly. In this work, we present three visualization case studies that have the potential to increase human operator efficiency in MDNav. While identifying the most critical “pain points” that operators face, and also working on potential solutions, we followed a human-centered design approach. We started with a series of interviews with potential users, and then rapidly created prototypes for alternative solutions, validated outcomes with feedback from users through out development of these proof of concept visualizations. With this survey of our current efforts, we demonstrate the transformative capability of interactive data visualizations for improving mission development and operations, enabling operators to grow intuition, and communicating key concepts across diverse mission teams.

Arora, Nitin

Direct Multipixel Imaging and Spectroscopy of an Exoplant with a Solar Gravity Lens Mission

We report here on the results of our initial study of a mission to the deep outer regions of our solar system, with the primary mission objective of conducting direct megapixel high-resolution imag- ing and spectroscopy of a potentially habitable exoplanet by exploiting the remarkable optical properties of the SGL. Our main goal was not to study how to get there (although this was also addressed), but rather, to investigate what it takes to operate spacecraft at such enormous distances with the needed precision. Specifically, we studied i) how a space mission to the focal region of the SGL may be used to obtain high-resolution direct imaging and spectroscopy of an exoplanet by detecting, tracking, and studying the Einstein ring around the Sun, and ii) how such information could be used to detect signs of life on another planet.

Astrophysics

A Science-Driven Mission Concept to An Exoplanet

A concept for a science-driven robotic mission to an exoplanet was developed by a team of scientists and engineers from NASA and academia. The concept and scope were based on key mission and science requirements designed to address the question: “What makes a flight mission to an exoplanet compelling, in terms of science return, compared to what we will be able to learn in the next few decades with large near-Earth telescopes or other remote sensing techniques such as a telescope at the Solar Gravity Lens Focus?” By thinking systematically through mission and science goals and objectives, key requirements were developed that would drive technology developments in all necessary aspects, not just on propulsion. Unique science measurements would be performed en route to the exoplanet, including exploring the environment in the outer regions of our solar system, the Oort Cloud, the local interstellar medium, and the astrospheric environment around the host star. One of the key mission science objectives, and one that addresses why a mission to an exoplanet is compelling, was to confirm and characterize life. This objective is fundamental and drives the need for a precursor exoplanet characterization program to search for Earth-centric biosignatures and also drives key aspects of the mission concept. The team concluded that a direct confirmation of life would require in situ observations and measurements which cannot be performed on a fast (~10% of the speed of light) flyby; thus, the mission would require a method to slow down, orbit, or send a probe to the exoplanet’s surface. This capability drives a trade between interstellar travel velocity, trip duration, and propulsion architecture, as well as a high level of onboard autonomy, including adaptive science data collection, on-board data processing, and analysis. This paper describes our mission concept, the key requirements, and open trades.

Bennett, Gary

GTOC9: Methods and Results from the Jet Propulsion Laboratory Team

The removal of 123 pieces of debris from the Sunsynchronous LEO environment is accomplished by a 10-spacecraft campaign wherein the spacecraft, flying in succession over an 8-yr period, rendezvous with a series of the debris objects, delivering a de-orbit package at each one before moving on to the next object by means of impulsive manoeuvres. This was the GTOC9 problem, as posed by the European Space Agency. The methods used by the Jet Propulsion Laboratory team are described, along with the winning solution found by the team. Methods include branch-and-bound searches that exploit the natural nodal drift to compute long chains of rendezvous with debris objects, beam searches for synthesising campaigns, ant colony optimisation, and a genetic algorithm. Databases of transfers between all bodies on a fine time grid are made, containing an easyto- compute yet accurate estimate of the transfer V . Lastly, a final non-linear programming optimisation is performed to ensure the trajectories meet all the constraints and are locally optimal in initial mass.

Sims, Jon

Interplanetary Trajectories for Ice Giant Mission Concepts

Interplanetary Trajectory options for missions to Uranus and Neptune, launching between 2025 and 2037, are presented. Trajectories using Chemical Propulsion, Solar Electric Propulsion and Radioisotope Thermoelectric Generator Electric Propulsion, with up to four planetary flybys are investigated. The effect of different launch vehicles with or without an optimal kick stage, on flight time, inserted mass and propellant throughput, is quantified. To enable simultaneous exploration of both planets, dual-spacecraft trajectories that deliver one spacecraft to each planet from a single launch, are presented. Attractive trajectories and mission opportunities for different multi-element mission architectures are presented.

Arora, Nitin

Experiments with Julia for Astrodynamics Applications

Julia's potential for solving complex astrodynamics problems is studied. Julia is a high-level, new, dynamic programming language with performance approaching C/Fortran and has features like inbuilt parallelism, variable accuracy, integrated numerical libraries and direct C and Fortran interfaces. Two astrodynamics problems are solved in Julia: 1) Lambert's problem, using the vercosine formulation and 2) trajectory integration. Implemented algorithms are compared with C and Fortran based counterparts on key performance parameters (speed, development effort, etc). Using Julia for fast and reliable astrodynamics software development is also discussed.

Arora, Nitin

Trajectories for a Near Term Mission to the Interstellar Medium

Trajectories for rapid access to the interstellar medium (ISM) with a Kuiper Belt Object (KBO) flyby, launching between 2022 and 2030, are described. An impulsive-patched-conic broad search algorithm combined with a local optimizer is used for the trajectory computations. Two classes of trajectories, (1) with a powered Jupiter flyby and (2) with a perihelion maneuver, are studied and compared. Planetary flybys combined with leveraging maneuvers reduce launch C3 requirements (by factor of 2 or more) and help satisfy mission-phasing constraints. Low launch C3 combined with leveraging and a perihelion maneuver is found to be enabling for a near-term potential mission to the ISM.

ISM