Engineering Papers⌕ Search

Engineering topics

Armstrong, Derek Elswick

Publications and source records attributed to Armstrong, Derek Elswick.

Application of machine learning to estimate fireball characteristics and their uncertainty from infrared spectral data

Experiments or events involving high explosives (HE) can be monitored remotely by infrared (IR) sensors to gather information about the configuration or materials involved in the device. Researchers at the Air Force Institute of Technology (AFIT) developed a phenomenological model for HE fireball spectra in the IR range that allows for parameters to be extracted from Fourier transform infrared (FTIR) data. This model includes parameters tied to physical characteristics of the fireball: temperature, size, soot, and gas concentrations. Previous works have sought to recover these parameters by the fitting of either whole spectra or select wavenumber bands to this phenomenological model. Difficulties arise due to the complex relationships between the parameters to be fit. Uncertainty quantification of the estimated fireball parameters is also problematic since HE experiments do not have any ground truth information on the parameters. It is suggested that artificial neural network (ANN) based approaches may be well suited to this problem, because of their ability to capture complex and highly nonlinear relationships. As such, this work seeks to explore the efficacy of deep artificial neural networks (DNNs) for this problem of parameter recovery from spectra and to also investigate the uncertainty of recovering the fireball parameters from FTIR data. Networks are designed using the hyperparameter optimization tool Hyperopt and trained/tested on artificial data generated using the phenomenological model developed by AFIT. The results of applying the network to the artificial data set are compared to a physics-based band approach that uses a selected number of bands based on their physical properties. Information on the uncertainty of estimating parameters from remotely sensed experimental data is obtained by treating the accuracy of the DNN model on artificial data as an upper bound and by examining the impact of emissivity due to soot on parameter estimation error; the results for artificial data are likely to be optimistic as compared to recovering parameters from experimental data.

42 ENGINEERING↗

New Capabilities for Sampling Tools

This report will discuss new capabilities that have been added to the sample.py and uniform_sampler.py codes. The codes have been updated to allow for both log-uniform sampling and categorical variables. The categorical variables do not have to be numeric. The different values for a categorical variable are specified in a limits file by having spaces between them. The difference between sample.py and uniform_sampler.py is that sample.py is for generating random samples and uniform_sampler.py is for generating samples or points on a fixed grid. After sourcing a file to set the environment, execute the codes with the commands: sample.py and uniform sampler.py .

97 MATHEMATICS AND COMPUTING↗

Raytracing

The raytracing (spectrally specific radiative transfer that does not couple back to the hydrodynamic evolution) code was developed because it helps improve our understanding of the physics of explosive events, validates computational physics codes, and estimates optical signals that are cheaper and safer than experiments involving high explosives. The raytracing code can also produce simulations that are useful to analyze what we can understand with sensors, such as determining what we can discriminate with sensors, like the presence of certain metals or the amount of soot. In addition, simulations can provide extra validations to computational physics to help us better understand discrepancies.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Raytracing

Explore the source record for details and available documents.

Luu, Anh (Ken)↗

Analysis of FFT Run-Times on LANL Computers

This paper gives results of a timing study for computing fast Fourier transforms (FFTs) on LANL based computing platforms. The platforms considered will be a node on Snow and a standard LANL HP laptop. The run-time for 1D FFTs will be measured for different sizes of data and the results are reported in FFTs/s.

97 MATHEMATICS AND COMPUTING↗

Raytracing Project: Graybody Approximation [Slides]

Graybody approximation is first step to infrared raytracing code. Graybody approximation can capture temperature, but obviously cannot be used for gas species characterization. Graybody approximation will be used for comparisons to experimental data that is integrated across wavenumber.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Remote Sensing of Dynamic Events [Slides]

Research into using advanced methods for remote sensing applications. A particular interest is in remote sensing of dynamic events involving high explosives (HE) and estimating parameters (e.g., temperature) that characterize the fireball. However, the research is interested in machine learning (ML) for infrared remote sensing in general. The motivation is to improve remote sensing methods of dynamic events to help with validation of computational physics codes.

47 OTHER INSTRUMENTATION↗

Evaluating the Feasibility of MCNP/FDTD EMP Calculations at Altitudes above 20km

This report investigates the use of MCNP/FDTD for 2D EMP calculations at altitudes above 20km. The objective is to determine the feasibility of performing EMP calculations for high altitude nuclear detonations using the MCNP/FDTD codes. The work in this report indicates that the issue with running such EMP calculations lies more in MCNP than in FDTD. In general, when performing EMP calculations with MCNP/FDTD, the majority of the computation time is in getting the results from MCNP. Typically, for EMP calculations with spatial domains of about 5 to 10km in both the x and z directions, the MCNP calculations take weeks to complete and the FDTD portion of the computation only takes one to two days. The problems with running MCNP on large problems are largely due to memory issues. One issue is that MCNP requires all tally grids of a simulation to reside in the memory of a single node (128GB on snow) and this, in turn, requires multiple MCNP simulations to complete large spatial/time domain problems.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Discussion of CoSA: Clustering of Sparse Approximations

The purpose of this talk is to discuss the possible applications of CoSA (Clustering of Sparse Approximations) to the exploitation of HSI (HyperSpectral Imagery) data. CoSA is presented by Moody et al. in the Journal of Applied Remote Sensing (“Land cover classification in multispectral imagery using clustering of sparse approximations over learned feature dictionaries”, Vol. 8, 2014) and is based on machine learning techniques.

97 MATHEMATICS AND COMPUTING↗

Mathematical Formulation used by MATLAB Code to Convert FTIR Interferograms to Calibrated Spectra

This report discusses the mathematical procedures used to convert raw interferograms from Fourier transform infrared (FTIR) sensors to calibrated spectra. The work discussed in this report was completed as part of the Helios project at Los Alamos National Laboratory. MATLAB code was developed to convert the raw interferograms to calibrated spectra. The report summarizes the developed MATLAB scripts and functions, along with a description of the mathematical methods used by the code. The first step in working with raw interferograms is to convert them to uncalibrated spectra by applying an apodization function to the raw data and then by performing a Fourier transform. The developed MATLAB code also addresses phase error correction by applying the Mertz method. This report provides documentation for the MATLAB scripts.

97 MATHEMATICS AND COMPUTING↗

A Report on the Validation of Beryllium Strength Models

This report discusses work on validating beryllium strength models with flyer plate and Taylor rod experimental data. Strength models are calibrated with Hopkinson bar and quasi-static data. The Hopkinson bar data for beryllium provides strain rates up to about 4000 per second. A limitation of the Hopkinson bar data for beryllium is that it only provides information on strain up to about 0.15. The lack of high strain data at high strain rates makes it difficult to distinguish between various strength model settings. The PTW model has been calibrated many different times over the last 12 years. The lack of high strain data for high strain rates has resulted in these calibrated PTW models for beryllium exhibiting significantly different behavior when extrapolated to high strain. For beryllium, the α parameter of PTW has recently been calibrated to high precision shear modulus data. In the past the α value for beryllium was set based on expert judgment. The new α value for beryllium was used in a calibration of the beryllium PTW model by Sky Sjue. The calibration by Sjue used EOS table information to model the temperature dependence of the heat capacity. Also, the calibration by Sjue used EOS table information to model the density changes of the beryllium sample during the Hopkinson bar and quasi-static experiments. In this paper, the calibrated PTW model by Sjue is compared against experimental data and other strength models. The other strength models being considered are a PTW model calibrated by Shuh- Rong Chen and a Steinberg-Guinan type model by John Pedicini. The three strength models are used in a comparison against flyer plate and Taylor rod data. The results show that the Chen PTW model provides better agreement to this data. The Chen PTW model settings have been previously adjusted to provide a better fit to flyer plate data, whereas the Sjue PTW model has not been changed based on flyer plate data. However, the Sjue model provides a reasonable fit to flyer plate and Taylor rod data, and also gives a better match to recently analyzed Z-machine data which has a strain of about 0.35 and a strain rate of 3e5 s -1 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗